Cannot access admin gui of dir-615 in bridge repeater mode.

Post new topic   Reply to topic    DD-WRT Forum Forum Index -> Ralink SoC based Hardware
Author Message
pauljwilliams
DD-WRT Novice


Joined: 15 Aug 2010
Posts: 1

PostPosted: Sun Aug 15, 2010 19:21    Post subject: Cannot access admin gui of dir-615 in bridge repeater mode. Reply with quote
As title.

My set up is as follows:

1 netgear adsl router providing internet access (Wirelss turned off). This is wired to a dir-615(d2) operating as an access point. For simplicity I set the SSID and key to the same as my old network (when it was just the adsl router acting as combined modem and AP)

I've got a 2nd dir-615 (a D4) in bridge repeater mode, set up as per the standard guide.

I;ve also got a PC with a wifi card.

All three routers have static IP addresses, and the ADSL router is set up as the DHCP server (both routers are set to forward DHCP)

From the PC I can access the admin Guis of the adsl router and the AP without a problem.

But I can only access the admin gui of the 3rd router (the bridge repeater) by using a wired connection.

Running the utility that came with the wirelss card in the PC shows three access points with my SSID - two on channel 11 and one on channel 1, with the two on channel 11 having the different MAC addresses (albeit adjacent).

So why cant I access the admin gui of the bridge repeater?
Sponsor
Display posts from previous:    Page 1 of 1
Post new topic   Reply to topic    DD-WRT Forum Forum Index -> Ralink SoC based Hardware All times are GMT

Navigation

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You cannot download files in this forum