try the next upcoming betas _________________ Forum Guidelines...How to get help
Throw some buzzwords into the WIKI search
I'm NOT rude, just offer pure facts!
Atheros (TP-Link & Clones, etc ) debrick service in EU
Guide on HowTo be Safe, Secure and Protect Your Online Anonymity!
Andreas Baumert: "Kundige Menschen befragen Fachleute, ohne ihnen auf die Nerven zu gehen. Sie stellen keine Fragen, die sie mit etwas Fleiß und Lektüre selber beantworten können. Sie wissen, auf welche Quellen es ankommt,und wie man sich Zugang zu ihnen verschafft."
I've switched to WPA2-Personal wit AES encryption, but the same, i only get 54mbit/sec :(
Is there something else i can check?
May we know what type or model of wireless adapters are trying to connect to your DIR-600? I did try 14896 for a while and upon installation I immediately got 150mbps without even changing any options in the DD-WRT admin page.
Btw, I reverted back to D-Link v.2.03 since I was so disappointed with DD-WRT's signal quality which was below D-Link's official firmware. I love DD-WRT's tons of tweaking options but I will wait for a new build to come out before I flash my DIR-600 to DD-WRT again.
The router works well, without any "bug", but I cannot get more than 9 or 10 Mb/s from wifi (I've not tested via LAN). If I test with my WL-500W via wifi/lan I can get something like 30 Mb/s and +70 Mb/s respectively (speedtest.net doesn't show me more than 70Mb/s). My Internet connection offers a total of 122 Mb/s for download.
I've read a bit and it seems that the official firmwares are much more optimized regarding WLAN throughput.
I would like to know if there are DD-WRT users that could/can achieve better performance and how.
I've tried all the possible settings, like channel's, N, NG Mixed, 20/40Mhz, WPA2 AES, etc, etc.
Joined: 20 Sep 2006 Posts: 45 Location: Lisbon, Portugal
Posted: Sat Oct 09, 2010 14:29 Post subject:
I've done further testing with my DIR-600. It seems the problem was on my modem/router that for some reason did not interacted well with the DIR-600.
Even with the default firmware I couldn't get more than 10Mbits... After a reboot on my ZON Hub router (Hitron) I could achieve 90Mbits on cable and 70Mbits via wireless.