Hi Eko,just after two days after I flash my 3302 with dd-wrt.v24-15172_NEWD-2_K2.6_mini-f7d3302.bin
I have some problem with radio part , It hard to connect , then I rise power to 200 mW and it show good indicator in windows system but it has unstable speed and low performance(low as 1Mbps) ,I just 5 meters away from AP and connect with 11G mode ,I try to change CH but it no good either.
Eko newest build is work ,flash direct from belkin webUI and here is cfe.bin that you request ,I wait for megabuild that support s for SMB file sharing and printer sharing if it possible
Thankyou for that cfe, I have the belkin play F7D4302v1 that I was experimenting with trying to JTAG before tornado released TJTAG 3.0.2 RC1 and somehow I messed up the CFE on it. I posted the wholeflash for it earlier in this post when the router was working, but couldn't get it to flash back to the router so I downloaded your cfe and edited mac's and JTAG loaded it to the router and it works.
I saw your cfe was for the F7D3302 and I hope it won't be an issue later, but I thought what do I have to lose. Haven't found the cfe for the F7D4302v1 yet. Has all the same hardware except the external 5ghz radio, so I figured the cfe would be the same.
I haven't loaded any firmware on the router yet, but at least I get a CFE prompt now. all I was getting before this from the serial output was
-----------------------------------------------
Decompressing...done
Decompressing...done
-----------------------------------------------
Then nothing.
Now I get this.
-----------------------------------------------
Decompressing...done
Decompressing...done
Init Arena
Init Devs.
Boot partition size = 131072(0x20000)
et0: Broadcom BCM47XX 10/100/1000 Mbps Ethernet Controller 5.10.128.0
CPU type 0x19740: 453MHz
Tot mem: 65536 KBytes
Bootloader version 0.08e boot_version 0.08e
Project name : WG7016F22 1-LF-AK
Press space bar to cancel startup...
Device eth0: hwaddr 94-44-xx-xx-xx-xx, ipaddr 192.168.2.1, mask 255.255.255.0
gateway not set, nameserver not set
TRX check magic for QA firmware = 12345678
Assume magic 0x20090928, Current magic 0xFFFFFFFF
Invalid boot block on disk
Reading :: Failed.: Timeout occured
Reading :: Failed.: Timeout occured
Reading :: Failed.: Timeout occured
CFE>
------------------------------------------------
Invalid boot block is because thier is no firmware on it at the moment, but at least it is alive again.
THANKYOU nattapan for the cfe
Yay, I am so happy. _________________ Linksys - WRT54GS Ver 7.2 (usb port added)
Belkin - (PLAY) F7D4302 Ver 1
Asus - WL500G Premium Ver 1
Asus - RT-N16
Last edited by eddie97044 on Wed Sep 15, 2010 16:11; edited 1 time in total
Can someone tell me WITH this means: Mistake! There was an attempt of an automatic insert of the message in a forum. Your message is not posted. Try still times who knows - can it will turn out? Still probably, that you too long wrote the message - then pass to page back, copy the text, update page, insert the copied text and press button "Send".
Have wasted half the morning trying to post for progress/problems, keep getting that garbled message!
well... with 3302 cfe will only take (flash) 3302 builds and will be detected as 3302 too.
Why wont you take cfe back from your 8mb flash backup. It is first 192k bytes.
I tried that but I think that upload is messed up or something. TJTAG kept freezing at 39% uploaded.
I just put stock belkin 4302 firmware on it via tftp and am reuploading via web gui now, and gui accepted the 4302 firmware as well as gui is reporting it as model F7D4302 Ver 1000. and shows 5Ghz radio settings.
Everything appears ok at this point Eko.
Edit --- I take that back. It failed to find firmware on reboot.
Anybody have a cfe for the belkin play F7D4302v1 that they could email me or post. _________________ Linksys - WRT54GS Ver 7.2 (usb port added)
Belkin - (PLAY) F7D4302 Ver 1
Asus - WL500G Premium Ver 1
Asus - RT-N16
Can someone tell me WITH this means: Mistake! There was an attempt of an automatic insert of the message in a forum. Your message is not posted. Try still times who knows - can it will turn out? Still probably, that you too long wrote the message - then pass to page back, copy the text, update page, insert the copied text and press button "Send".
Have wasted half the morning trying to post for progress/problems, keep getting that garbled message!
Click the preview button first, then submit your post...forum bug. _________________ Eko Builds
I just put stock belkin 4302 firmware on it via tftp and am reuploading via web gui now, and gui accepted the 4302 firmware as well as gui is reporting it as model F7D4302 Ver 1000. and shows 5Ghz radio settings.
Everything appears ok at this point Eko.
If it accepts 4302 firmware then you have a 4302 cfe,
the 3302 cfe will not accept a 4302 firmware. _________________ Kernel panic: Aiee, killing interrupt handler!
It's not now, It must have been the stock firmware that I uploaded using tftp running on it that accepted the image, however the actuall cfe mini web server is not.
It reply's with
The file transferred is not a valid firmware image.
and serial prompt says this on cfe mini web upload of firmware.
CFE> tcb->tcb_rcvnext=d0ce8d4b seqnum=d0ce8f63
tcb->tcb_rcvnext=d0ce8f63 seqnum=d0ce917b
Invalid magic. This is not a TRX image.
TRX check magic for QA firmware = 12345678
Assume magic 0x20090928, Current magic 0x20091006 _________________ Linksys - WRT54GS Ver 7.2 (usb port added)
Belkin - (PLAY) F7D4302 Ver 1
Asus - WL500G Premium Ver 1
Asus - RT-N16
Exactly, the cfe is expecting a 3302 magic but has found that the firmware has a 4302 magic.
Do as Eko said, reflash the cfe from your wholeflash but with first 256KB of it.
The cfe is actually only 192KB so you will also get 64KB of kernel flashed but it is needed for tjtag which expects the cfe to be 256KB. _________________ Kernel panic: Aiee, killing interrupt handler!
Exactly, the cfe is expecting a 3302 magic but has found that the firmware has a 4302 magic.
Do as Eko said, reflash the cfe from your wholeflash but with first 256KB of it.
The cfe is actually only 192KB so you will also get 64KB of kernel flashed but it is needed for tjtag which expects the cfe to be 256KB.
Ok, I will give it another try with the first 256kb of my wholeflash.
I will let you know the results when it's done. _________________ Linksys - WRT54GS Ver 7.2 (usb port added)
Belkin - (PLAY) F7D4302 Ver 1
Asus - WL500G Premium Ver 1
Asus - RT-N16