Joined: 31 Aug 2009 Posts: 2448 Location: Third Rock from the Sun
Posted: Sat Sep 25, 2010 23:28 Post subject: Re: Linksys E1000 now supported
Eko wrote:
Hi,
Linksys E1000 is now fully supported. For flashing use attached build.
Thx to barryware for purchasing this router and testing the builds. Also thx to LOM for his kind advices.
An special instructions for flashing? or the standard 30-30-30 flash through GUI?
EDIT: Since the hardware is the same as the wrt160n v3 I took the liberty of modifying the wtr160n v3 flashing and reversion instruction if anybody would like to verify and copy them to the dd-wrt wiki.
Posted: Thu Sep 30, 2010 1:30 Post subject: Re: Linksys E1000 now supported
Thanks, Eko, for all of your work on this.
Any idea if this build will work for the E1000 v2.0 hardware (BCM5357-based)? If not, is it simply a matter of someone buying one of the v2.0 devices and extracting a little information from it, or is adding support for the new chip going to require significantly more than that?
Posted: Thu Sep 30, 2010 3:43 Post subject: Re: Linksys E1000 now supported
Duck_Dodgers wrote:
Thanks, Eko, for all of your work on this.
Any idea if this build will work for the E1000 v2.0 hardware (BCM5357-based)? If not, is it simply a matter of someone buying one of the v2.0 devices and extracting a little information from it, or is adding support for the new chip going to require significantly more than that?
I'm afraid it will need at least new wireless drivers from Broadcom we don't have (yet). And maybe new kernel support for this chip too.
Can anyone answer my question about putting std_nokaid-small on here? I have downloaded and tried to flash dd-wrt.v24-13527_NEWD2_K2.6_std_nokaid_small.bin and it fails and now I get lights and everything on the router but its unaccessible. I may have to tftp the original ddwrt.v24-15334_NEWD2_K2.6_mini_e1000.bin back on there.
Joined: 26 Jan 2008 Posts: 13049 Location: Behind The Reset Button
Posted: Tue Oct 05, 2010 0:07 Post subject:
Zelda wrote:
Can anyone answer my question about putting std_nokaid-small on here? I have downloaded and tried to flash dd-wrt.v24-13527_NEWD2_K2.6_std_nokaid_small.bin and it fails and now I get lights and everything on the router but its unaccessible. I may have to tftp the original ddwrt.v24-15334_NEWD2_K2.6_mini_e1000.bin back on there.
So in a way I may have answered my own question.
15279 was the 1st build for the e1000. any builds earlier than that (13527) will not have the code for the e1000. _________________ [Moderator Deleted]
Joined: 26 Jan 2008 Posts: 13049 Location: Behind The Reset Button
Posted: Wed Oct 06, 2010 20:01 Post subject: Re: hey
scotcha1 wrote:
I have a Linksys e1000 with Firmware 2.0.0.1
One of the previous posters mentioned hardware v2 of the e1000 being unable to use the firmware posted above.
Was this poster referring to Firmware 2 or Hardware 2? Assuming they are the same...?
If not - that'd be great! as i'd love to be able to flash ddwrt on my e1000 firmware 2.0
if there is no version on the sticker after the model, it is a V1 (ex. E1000). If it has a version like V2, (ex. E1000 V2) then it is a V2 and is not supported just yet.
Hardware versions and firmware versions are different _________________ [Moderator Deleted]