If someone gives me a webhost where I can upload the files, I got a 5953 woring with 1.2.1
Code:
BusyBox v1.2.1 (2007.01.01-14:49+0000) Built-in shell (ash)
Enter 'help' for a list of built-in commands.
_______ ________ __
| |.-----.-----.-----.| | | |.----.| |_
| - || _ | -__| || | | || _|| _|
|_______|| __|_____|__|__||________||__| |____|
|__| W I R E L E S S F R E E D O M
KAMIKAZE (bleeding edge, r5953) -------------------
* 10 oz Vodka Shake well with ice and strain
* 10 oz Triple sec mixture into 10 shot glasses.
* 10 oz lime juice Salute!
---------------------------------------------------
root@OpenWrt:~#
Easy. Setup a development environment (on Windows with the VMware player and a Ubuntu Image, see the sticky thread in the OpenWrt Developers forum).
Or wait a bit and I'll upload a new image. I think nbd already fixed the Busybox issues in subversion...
.... i dont mean the general compiling ,
i compiled kamikaze by my own but i want that gpio devices.... but seems have to patch gpio.c and add atheros support....
I built my own image with the latest source but version 1.2.1 busybox and it works. I had flashed a bad image so i went back to redboot and flashed my new image and everything is fine.
On a side note, I also included wpa_supplicant and other wireless tools and i've been able to get the fon router to connect to another router using WPA.
I'm no openwrt and linux expert so i have no clue on how to set the routing tables to bridge the ethernet and port forward...
It didn't start again. Even Reset by resetbutto does noch work in anyway. I tried all possibillitys to reset the box. So, what is it doing:
on startup, there is only the power led on. Than (after half an hour of waiting) nothing more happens. The wlan led is no more on. I tried to plug it with crossover to my gentoo box and telnet to it (i tried 192.168.1.1 and .1.254). When it's connected to the computer, first 10 seconds nothing happens, and then the Internet Led turns on. Everytime while I'm generating networktraffic (with ping or something) the led is blinking.
Doe's anyone know this Problem too, or do i have to reflash it by serial/jtag?
Greetings
Andre
ps: if webspace for images is still needes, I can offer some Space on my rootserver.