Problem beim Update auf r15693, r15704 und Build r15747

Post new topic   Reply to topic    DD-WRT Forum Forum Index -> X86 basierende Hardware
Author Message
woodgee
DD-WRT Novice


Joined: 04 Jan 2009
Posts: 10

PostPosted: Sat Nov 13, 2010 18:56    Post subject: Problem beim Update auf r15693, r15704 und Build r15747 Reply with quote
hallo,
ich kann von der 10-26-10-r15506 nicht auf die neueren versionen updaten.
habe es heute vergeblich versucht, sowohl eine neuinstallation auf die cf card (zuvor genullt) mit physdiskwrite wie auch ein webupdate funktionieren nicht.

bei der neuinstallation kann ich keine änderungen speichern ( admin passwort oder ip-adressen ) lassen sich zwar ändern aber beim nächsten reboot sind sie wieder verloren.
per serielle konsole bekomme ich angezeigt, dass das /dev/nvram nicht beschrieben werden kann (i/o error).
der fehler ist reproduzierbar und tritt bei den builds 11-06-10-r15693 und 11-09-10-r15704 auf.

per webupdate wird die cf card beim nächsten reboot nicht mehr als boot partition erkannt.
das alix board bios meldet mir ich soll ein boot gerät anstecken.

dies tritt bei mir ab der version 11-06-10-r15693 auf, also die aktuellen letzten zwei builds.

kann jemand die fehler bestätigen oder eine hilfestellung geben wie ich doch updaten kann ??

dankeschön

nachtrag... das ganze läuft auf einem alix board alix2d3 mit 2gb cf-card


Last edited by woodgee on Thu Nov 18, 2010 11:20; edited 1 time in total
Sponsor
Sash
DD-WRT Guru


Joined: 20 Sep 2006
Posts: 17378
Location: Hesse/Germany

PostPosted: Sun Nov 14, 2010 13:43    Post subject: Reply with quote
also bei mir das das update mit dem nightly vom dienstag noch funktioniert.
ueberschreib die cf mal dediziert mit nullen (nicht nur loeschen). neuestes bios is drauf?!

_________________
GEGEN die EEG-UMLAGE auf EIGENVERBRAUCH!
_________________
Forum Guidelines...How to get help
&
Forum Rules
&
RTFM/STFW
&
Throw some buzzwords into the WIKI search Exclamation
_________________
I'm NOT rude, just offer pure facts!
_________________
Atheros (TP-Link & Clones, etc ) debrick service in EU
_________________
Guide on HowTo be Safe, Secure and Protect Your Online Anonymity!


Last edited by Sash on Wed Nov 17, 2010 18:54; edited 1 time in total
woodgee
DD-WRT Novice


Joined: 04 Jan 2009
Posts: 10

PostPosted: Sun Nov 14, 2010 14:03    Post subject: Reply with quote
das neuste bios ist drauf.

habe die cf mit dd if=/dev/zero of=/dev/sda behandelt
danach das neuste nightly draufgeschrieben.
bootet ... danach abfrage für passwort -> ändern
serielle schnittstelle sagt /dev/nvram input/output error

wie erwähnt bei den letzten zwei nightlys ...
beim 10-26-10-r15506 funktioniert alles wie gewohnt.
woodgee
DD-WRT Novice


Joined: 04 Jan 2009
Posts: 10

PostPosted: Tue Nov 16, 2010 9:51    Post subject: Reply with quote
hat denn niemnad das selbe problem ??

habs mit 2 alix boards aufprobiert, habe verschiedene cf cards benutzt, ich bekomme immer den selben fehler.

dies tritt bei mir sowohl mit der public wie auch mit der full version der beiden nightlys auf.
woodgee
DD-WRT Novice


Joined: 04 Jan 2009
Posts: 10

PostPosted: Wed Nov 17, 2010 15:20    Post subject: Reply with quote
hier nun die aktuelle nightly vom 17.11.2010 -> selber fehler ...

BOOTLOG
----------------------------------------
Booting 'DD-WRT'

root (hd0,0)
Filesystem type is ext2fs, partition type 0x83
kernel /boot/vmlinuz root=/dev/hda2 rootfstype=squashfs noinitrd console=ttyS0
,115200n8 reboot=bios
[Linux-bzImage, setup=0x2600, size=0x1e1df8]
boot
Linux version 2.6.24.111 (root@dd-wrt) (gcc version 4.2.1) #1628 Wed Nov 17 13:32:25 CET 2010
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 00000000000a0000 (usable)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 0000000010000000 (usable)
BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
0MB HIGHMEM available.
256MB LOWMEM available.
Zone PFN ranges:
DMA 0 -> 4096
Normal 4096 -> 65536
HighMem 65536 -> 65536
Movable zone start PFN for each node
early_node_map[1] active PFN ranges
0: 0 -> 65536
DMI not present or invalid.
Allocating PCI resources starting at 20000000 (gap: 10000000:eff00000)
Built 1 zonelists in Zone order. Total pages: 65024
Kernel command line: root=/dev/hda2 rootfstype=squashfs noinitrd console=ttyS0,115200n8 reboot=bios
Initializing CPU#0
PID hash table entries: 1024 (order: 10, 4096 bytes)
Detected 498.054 MHz processor.
Console: colour dummy device 80x25
console [ttyS0] enabled
Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
Memory: 255212k/262144k available (2734k kernel code, 6496k reserved, 941k data, 188k init, 0k highmem)
virtual kernel memory layout:
fixmap : 0xfffed000 - 0xfffff000 ( 72 kB)
pkmap : 0xff800000 - 0xffc00000 (4096 kB)
vmalloc : 0xd0800000 - 0xff7fe000 ( 751 MB)
lowmem : 0xc0000000 - 0xd0000000 ( 256 MB)
.init : 0xc049a000 - 0xc04c9000 ( 188 kB)
.data : 0xc03aba67 - 0xc04970dc ( 941 kB)
.text : 0xc0100000 - 0xc03aba67 (2734 kB)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay using timer specific routine.. 997.54 BogoMIPS (lpj=1995098)
Mount-cache hash table entries: 512
CPU: L1 I Cache: 64K (32 bytes/line), D cache 64K (32 bytes/line)
CPU: L2 Cache: 128K (32 bytes/line)
Compat vDSO mapped to ffffe000.
CPU: AMD Geode(TM) Integrated Processor by AMD PCS stepping 02
Checking 'hlt' instruction... OK.
NET: Registered protocol family 16
PCI: PCI BIOS revision 2.10 entry at 0xfced9, last bus=0
PCI: Using configuration type 1
Setting up standard PCI resources
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Probing PCI hardware
NET: Registered protocol family 2
Time: tsc clocksource has been installed.
IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
TCP established hash table entries: 8192 (order: 4, 65536 bytes)
TCP bind hash table entries: 8192 (order: 3, 32768 bytes)
TCP: Hash tables configured (established 8192 bind 8192)
TCP reno registered
devfs: 2004-01-31 Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x1
squashfs: version 3.0 (2006/03/15) Phillip Lougher
io scheduler noop registered
io scheduler deadline registered (default)
Could not find Carillo Ranch MCH device.
Real Time Clock Driver v1.12ac
AMD Geode RNG detected
Linux agpgart interface v0.102
Serial: 8250/16550 driver $Revision: 1.90 $ 2 ports, IRQ sharing disabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a NS16550A
serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a NS16550A
loop: module loaded
nbd: registered device at major 43
ibmasm: IBM ASM Service Processor Driver version 1.0 loaded
PPP generic driver version 2.4.2
PPP Deflate Compression module registered
PPP BSD Compression module registered
MPPE/MPPC encryption/compression module registered
NET: Registered protocol family 24
IMQ starting with 2 devices...
IMQ driver loaded successfully.
Hooking IMQ before NAT on PREROUTING.
Hooking IMQ after NAT on POSTROUTING.
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
usbcore: registered new interface driver catc
drivers/net/usb/catc.c: v2.8 CATC EL1210A NetMate USB Ethernet driver
usbcore: registered new interface driver kaweth
pegasus: v0.6.14 (2006/09/27), Pegasus/Pegasus II USB Ethernet driver
usbcore: registered new interface driver pegasus
drivers/net/usb/rtl8150.c: rtl8150 based usb-ethernet driver v0.6.2 (2004/08/27)
usbcore: registered new interface driver rtl8150
usbcore: registered new interface driver asix
usbcore: registered new interface driver cdc_ether
usbcore: registered new interface driver dm9601
usbcore: registered new interface driver gl620a
usbcore: registered new interface driver net1080
usbcore: registered new interface driver plusb
usbcore: registered new interface driver rndis_host
usbcore: registered new interface driver cdc_subset
usbcore: registered new interface driver MOSCHIP usb-ethernet driver
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
hda: LEXAR ATA FLASH, CFA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hda: max request size: 128KiB
hda: 4008816 sectors (2052 MB) w/1KiB Cache, CHS=3977/16/63
/dev/ide/host0/bus0/target0/lun0: p1 p2 p3 p4
ide-floppy driver 0.99.newide
PCI: Unable to reserve I/O region #1:8@1f0 for device 0000:00:0f.2
pata_amd 0000:00:0f.2: failed to request/iomap BARs for port 0 (errno=-16)
scsi0 : pata_amd
scsi1 : pata_amd
ata1: DUMMY
ata2: PATA max UDMA/100 cmd 0x00010170 ctl 0x00010376 bmdma 0x0001ff08 irq 15
ehci_hcd 0000:00:0f.5: EHCI Host Controller
ehci_hcd 0000:00:0f.5: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:0f.5: irq 12, io mem 0xefffd000
ehci_hcd 0000:00:0f.5: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 4 ports detected
116x: driver isp116x-hcd, 03 Nov 2005
ohci_hcd 0000:00:0f.4: OHCI Host Controller
ohci_hcd 0000:00:0f.4: new USB bus registered, assigned bus number 2
ohci_hcd 0000:00:0f.4: irq 12, io mem 0xefffe000
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 4 ports detected
USB Universal Host Controller Interface driver v3.0
sl811: driver sl811-hcd, 19 May 2005
drivers/usb/host/r8a66597-hcd.c: driver r8a66597_hcd, 29 May 2007
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
usbcore: registered new interface driver libusual
usbcore: registered new interface driver usbserial
drivers/usb/serial/usb-serial.c: USB Serial Driver core
drivers/usb/serial/usb-serial.c: USB Serial support registered for airprime
usbcore: registered new interface driver airprime
drivers/usb/serial/usb-serial.c: USB Serial support registered for GSM modem (1-port)
usbcore: registered new interface driver option
drivers/usb/serial/option.c: USB Driver for GSM modems: v0.7.1
drivers/usb/serial/usb-serial.c: USB Serial support registered for Sierra USB modem
usbcore: registered new interface driver sierra
drivers/usb/serial/sierra.c: USB Driver for Sierra Wireless USB modems: v.1.7.0
i8042.c: No controller found.
i2c /dev entries driver
Software Watchdog Timer: 0.07 initialized. soft_noboot=0 soft_margin=60 sec (nowayout= 0)
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
wbsd: Winbond W83L51xD SD/MMC card interface driver
wbsd: Copyright(c) Pierre Ossman
usbcore: registered new interface driver usbhid
drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
u32 classifier
Actions configured
Netfilter messages via NETLINK v0.30.
nf_conntrack version 0.5.0 (4096 buckets, 16384 max)
ctnetlink v0.93: registering with nfnetlink.
ip_tables: (C) 2000-2006 Netfilter Core Team
IPP2P v0.8.2 loading
ipt_random match loaded
ClusterIP Version 0.8 loaded successfully
TCP bic registered
TCP cubic registered
TCP westwood registered
TCP highspeed registered
TCP hybla registered
TCP htcp registered
TCP vegas registered
TCP veno registered
TCP scalable registered
TCP lp registered
TCP yeah registered
TCP illinois registered
NET: Registered protocol family 1
NET: Registered protocol family 17
Welcome to PF_RING 3.2.1
(C) 2004-06 L.Deri <deri@ntop.org>
NET: Registered protocol family 27
PF_RING: bucket length 128 bytes
PF_RING: ring slots 4096
PF_RING: sample rate 1 [1=no sampling]
PF_RING: capture TX No [RX only]
PF_RING: transparent mode Yes
PF_RING initialized correctly.
PF_RING: registered /proc/net/pf_ring/
802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com>
All bugs added by David S. Miller <davem@redhat.com>
Using IPI Shortcut mode
VFS: Mounted root (squashfs filesystem) readonly.
Mounted devfs on /dev
Freeing unused kernel memory: 188k freed
start service
starting Architecture code for x86
recover broken nvram
Broken NVRAM found, recovering it (filesystem error)

via-rhine.c:v1.10-LK1.4.3 2007-03-06 Written by Donald Becker
eth0: VIA Rhine III (Management Adapter) at 0xe0000000, 00:0d:b9:17:28:fc, IRQ 10.
eth0: MII PHY found at address 1, status 0x7869 advertising 05e1 Link 45e1.
eth1: VIA Rhine III (Management Adapter) at 0xe0040000, 00:0d:b9:17:28:fd, IRQ 11.
eth1: MII PHY found at address 1, status 0x7849 advertising 05e1 Link 0000.
eth2: VIA Rhine III (Management Adapter) at 0xe0080000, 00:0d:b9:17:28:fe, IRQ 15.
eth2: MII PHY found at address 1, status 0x7849 advertising 05e1 Link 0000.
eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
eth1: link down
eth2: link down
ifconfig: SIOCSIFADDR: No such device
load ATH 802.11 a/b/g Driver
ath_hal: module license 'Proprietary' taints kernel.
ath_hal: 2009-05-08 (AR5210, AR5211, AR5212, AR9160, AR9280, RF5111, RF5112, RF2413, RF5413, RF2425, REGOPS_FUNC, WRITE_EEPROM, XR)
ath_pci: svn r850
wlan: svn r850
wlan: mac acl policy registered
ath_rate_sample: 1.2 (svn r850)
ath_rate_minstrel: Minstrel automatic rate control algorithm 1.2 (svn r850)
ath_rate_minstrel: look around rate set to 10%
ath_rate_minstrel: EWMA rolloff level set to 75%
ath_rate_minstrel: max segment size in the mrr set to 6000 us
insmod: ath_ahb.ko: module not found
load ATH 802.11n Driver
ath_mimo_hal: 0.9.17.1 (AR5416)
ath_mimo_pci: 0.9.4.5 (Atheros/multi-bss)
ath_mimo_pci: CR-LSDK-1.4.0.144
ath_dfs: Version 2.0.0
Copyright (c) 2005-2006 Atheros Communications, Inc. All Rights Reserved
wlan: 0.8.4.2 (Atheros/multi-bss)
wlan: mac acl policy registered
ath_rate_atheros: Version 2.0.1
Copyright (c) 2001-2004 Atheros Communications, Inc, All Rights Reserved
insmod: ath_mimo_ahb.ko: module not found
[USB] checking...
commit
nvram_commit(): failed
/dev/nvram: Input/output error

sorry, your unit does not support resetbutton feature

br0: Dropping NETIF_F_UFO since no NETIF_F_HW_CSUM feature.
device br0 entered promiscuous mode
killall: ead: no process killed
eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
device eth0 entered promiscuous mode
eth1: link down
eth1: link down
device eth1 entered promiscuous mode
eth2: link down
eth2: link down
device eth2 entered promiscuous mode
sh: ead: not found
killall: roaming_daemon: no procbr0: port 1(eth0) entering learning state
ess killed
device br0 left promiscuous mode
device br0 entered promiscuous mode
device br0 left promiscuous mode
device br0 entered promiscuous mode
ifconfig: ioctl 0x8914 failed: Cannot assign requested address
rmmod: bonding: No such file or directory
Ethernet Channel Bonding Driver: v3.1.3 (June 13, 2007)
bonding: MII link monitoring set to 100 ms
cp: cannot stat '/tmp/mycron.d/*': No such file or directory
cp: cannot stat '/jffs/mycron.d/*': No such file or directory
rmmod: n_hdlc: No such file or directory
ifconfig: ioctl 0x8913 failed: No such device
br0: No such process
cp: cannot stat '/mmc/mycron.d/*': No such file or directory
br0: topology change detected, propagating
br0: port 1(eth0) entering forwarding state
SIOCGIFFLAGS: No such device
SIOCGIFFLAGS: No such device
SIOCGIFFLAGS: No such device
SIOCGIFFLAGS: No such device
rmmod: ipt_webstr: No such file or directory
rmmod: ipt_layer7: No such file or directory
rmmod: ipt_ipp2p: No such file or directory
connect: Network is unreachable
connect: Network is unreachable
connect: Network is unreachable
gethostbyname: Network is unreachable
rmmod: imq: No such file or directory
SIOCGIFFLAGS: No such device
SIOCGIFFLAGS: No such device
SIOCGIFFLAGS: No such device
SIOCGIFFLAGS: No such device
rmmod: ipt_webstr: No such file or directory
rmmod: ipt_layer7: No such file or directory
rmmod: ipt_ipp2p: No such file or directory
rmmod: imq: No such file or directory
SIOCGIFFLAGS: No such device
SIOCGIFFLAGS: No such device
SIOCGIFFLAGS: No such device
SIOCGIFFLAGS: No such device
rmmod: ipt_webstr: No such file or directory
rmmod: ipt_layer7: No such file or directory
rmmod: ipt_ipp2p: No such file or directory
rmmod: imq: No such file or directory
connect: Network is unreachable
connect: Network is unreachable
connect: Network is unreachable
gethostbyname: Network is unreachable


Last edited by woodgee on Thu Nov 18, 2010 11:14; edited 1 time in total
Sash
DD-WRT Guru


Joined: 20 Sep 2006
Posts: 17378
Location: Hesse/Germany

PostPosted: Wed Nov 17, 2010 18:54    Post subject: Reply with quote
sich seh kein problem. geht doch! ich weiss net was du willst!
_________________
GEGEN die EEG-UMLAGE auf EIGENVERBRAUCH!
_________________
Forum Guidelines...How to get help
&
Forum Rules
&
RTFM/STFW
&
Throw some buzzwords into the WIKI search Exclamation
_________________
I'm NOT rude, just offer pure facts!
_________________
Atheros (TP-Link & Clones, etc ) debrick service in EU
_________________
Guide on HowTo be Safe, Secure and Protect Your Online Anonymity!
woodgee
DD-WRT Novice


Joined: 04 Jan 2009
Posts: 10

PostPosted: Wed Nov 17, 2010 20:39    Post subject: Reply with quote
@sash
das ist mein problem ...

commit
nvram_commit(): failed
/dev/nvram: Input/output error


diese meldung kommt bei jeder speicherung der eingabe über das webinterface.
änderungen werden somit nur temporär gepeichert.
beim nächsten neustart sind sie wieder verloren.
Display posts from previous:    Page 1 of 1
Post new topic   Reply to topic    DD-WRT Forum Forum Index -> X86 basierende Hardware All times are GMT

Navigation

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You cannot download files in this forum