Edit: have flashed my E2000's to this build (real e2000 and converted wrt320n) and everything seems ok so far.
MOD EDIT:
This is the build thread for this TEST build. Do not flash unless you have a means of recovery, and do not discuss configuration of individual routers or respond to user inquiries in this thread. This thread is to be used to give information to other users and the devs, not to seek solutions to your issues. Start a new thread if you wish to discuss your issues. As per the forum guidelines:
Build threads deal with test builds. Use the thread to report information, not to seek it. Specific issues or successes that you have found that relate to that build are welcome but do not ask for assistance with a configuration problem with your router.
Joined: 24 Aug 2009 Posts: 2070 Location: South Florida
Posted: Sun Nov 21, 2010 22:58 Post subject:
Unless you have a Atheros/Bufallo based router, there is no point to use this build...
http://svn.dd-wrt.com:8000/dd-wrt/timeline _________________ Optware, the Right Way
Asus RT-AC68U
Asus RT-N66U
Asus RT-N10
Asus RT-N12
Asus RT-N16 x5
Asus WL520gU
Engenious ECB350
Linksys WRT600Nv1.1
Linksys WRT610Nv1
Linksys E2000
Netgear WNDR3300
SonicWall NSA220W
SonicWall TZ215W
SonicWall TZ205W
SonicWall TZ105W
I actually do have 2 Atheros based units , but aside from that, only other reason i would see to use this build is because 15747 is simply removed from the main branch. So if someone wanted to try a newer build, this would be the newest. _________________ Wireless N Config | Linking Routers | DD-WRT Wiki | DD-WRT Builds | Peacock - Broadcom FAQ
Posted: Mon Nov 22, 2010 1:22 Post subject: Linksys E3000
I flashed my E3000 with 15778 and all is running fine. I did notice some increased memory usage, but does not seem to have an impact. DDNS, WPA2 AES, clients on both radios, 40 mhz channel width on the 5 ghz freq and speeds are high and signal is good. So far so good.
Joined: 18 Jan 2008 Posts: 269 Location: Devon, PA USA
Posted: Mon Nov 22, 2010 2:38 Post subject:
Just flashed my wrt600N v1.1 and so far so good. I had flashed the previous pulled version but upgraded to this new one. _________________ 2 x wrt600n v1.1 AP WL0 Mixed Mode WPA2 Pers Aes, WL1 N Only Repeater Bridge WPA2 Pers AES V24 BS 15778 WT610N
wrt310n Wireless Bridge WPA2 Pers AES v24 BS 15506 Mini
wrt54g v7 G Only Repeater Bridge WPA2 Pers AES v24 BS 12523 Micro
Joined: 18 Jan 2008 Posts: 269 Location: Devon, PA USA
Posted: Mon Nov 22, 2010 22:42 Post subject:
Just upgraded a wrt160nv1 and a wrt160nv3 units both running in wds mode. NO problems so far. _________________ 2 x wrt600n v1.1 AP WL0 Mixed Mode WPA2 Pers Aes, WL1 N Only Repeater Bridge WPA2 Pers AES V24 BS 15778 WT610N
wrt310n Wireless Bridge WPA2 Pers AES v24 BS 15506 Mini
wrt54g v7 G Only Repeater Bridge WPA2 Pers AES v24 BS 12523 Micro