DD-WRT Forum :: View topic - Linksys E4200 Router released (test build available)

Quick Links

Log in

Linksys E4200 Router released (test build available)

This topic is locked: you cannot edit posts or make replies.

DD-WRT Forum Forum Index -> Broadcom SoC based Hardware

Goto page 1, 2, 3 ... 45, 46, 47 Next

View previous topic :: View next topic

Author

Message

tcviper
DD-WRT Novice

Joined: 04 Feb 2009
Posts: 45

Posted: Wed Jan 19, 2011 16:00 Post subject: Linksys E4200 Router released (test build available)

A brand new Linksys E4200 Maximum Performance Wireless-N Router has been released today by Cisco/Linksys.

Gonna be interesting to see if DD-WRT can support this model, I already ordered one today to check it out.

More info: http://homestore.cisco.com/en-us/Routers/Linksys-E4200-MaximumPerformance-Wirelessn-router_stcVVproductId122703236VVcatId551966VVviewprod.htm

MOD EDIT: Please restrict posts in this thread to those that pertain to the use of dd-wrt on this specific router only. Do NOT post in this thread general questions about dd-wrt or general questions about how to configure your router even if it happens to be an E4200. Start a new thread instead. This thread should be restricted to specific issues related to the E4200 only.

Test build and discussion of the various test builds commences at page 11: http://www.dd-wrt.com/phpBB2/viewtopic.php?t=86316&postdays=0&postorder=asc&start=150

You are best advised to read the wiki on this router for install instructions and general information.

Last edited by tcviper on Fri Apr 08, 2011 14:28; edited 1 time in total

Sponsor

barryware
DD-WRT Guru

Joined: 26 Jan 2008
Posts: 12310
Location: N41 55.327 W88 03.986

Posted: Wed Jan 19, 2011 16:10 Post subject: Re: Linksys E4200 Router released

tcviper wrote:

No pics of the insides on the fcc site. There is a "short term" confidentiality agreement that expires on 1/31/2011. Maybe info will be available then.

So... Looks like you need to open yours and take a few pics.. Maybe dump a boot log..
_________________
[MODERATOR DELETED] Shocked

tcviper
DD-WRT Novice

Joined: 04 Feb 2009
Posts: 45

Posted: Wed Jan 19, 2011 16:42 Post subject:
I will for sure dont worry Might take a bit of time though since Im in europe and its coming from the US

kt_haddock
DD-WRT Guru

Joined: 25 Dec 2009
Posts: 599

Posted: Wed Jan 19, 2011 17:47 Post subject:
Another dinner plate relese..... _________________ \| ASUS 2x RT-N16 \| .-. \| @ \| [I prefer answere in whole sentence]

oxygenx
DD-WRT Guru

Joined: 11 Nov 2007
Posts: 566

Posted: Wed Jan 19, 2011 18:10 Post subject:

really nice device. any word on cpu, rom, ram?
_________________
Router: WNDR3300 (wl0: n-Only 5Ghz, WPA2-AES, wl1: g-Only, WPA-Mixed-Mixed)
WDS Node 1: WNDR3300 (wl0: n-Only 5Ghz, WPA2-AES, WDS-connected Router, wl1: g-Only WPA-Mixed-Mixed)
WDS Node 2: WRT54GL (g-Only, WPA-Mixed-Mixed WDS-connected to Router)
Modem: Cisco EPC3202
clients: Notebook 1, D-Link 323, PS3 Slim, Kathrein UFC960 connected to WDS Node 1 via Gigabit Switch. Notebook 2, Deskjet 6980 connected to WDS Node 2

Masterman
DD-WRT Guru

Joined: 24 Aug 2009
Posts: 2039
Location: South Florida

Posted: Wed Jan 19, 2011 19:26 Post subject:

Funny that they (Linksys) don't market a 5GHz client adapter to run at 450mbps.. Laughing

Also, why are they only mini-PCI?

http://www.newegg.com/Product/ProductList.aspx?Submit=ENE&N=100010074%20600014263&IsNodeId=1&name=Up%20to%20450Mbps
_________________
Optware, the Right Way
Asus WL520gU
Asus WL500gPv2 x2
Asus WL500W
Asus RT-N10
Asus RT-N12
Asus RT-N16 x3
D-Link DIR-825B
Linksys WRT320Nv1
Linksys WRT600Nv1.1
Linksys WRT610Nv1
Linksys E2000
Netgear WNDR3300
TP-Link WR1043ND

max pl
DD-WRT User

Joined: 26 Oct 2009
Posts: 63

Posted: Wed Jan 19, 2011 20:21 Post subject:
this chart shows specs: http://home.cisco.com/en-us/wireless/linksys/specs no info on internals though.

speednet
DD-WRT Novice

Joined: 19 Oct 2006
Posts: 7

Posted: Wed Jan 19, 2011 22:08 Post subject:
The is a spec sheet available here: http://homesupport.cisco.com/en-us/wireless/linksys/E4200 Does not include chipset, etc., but does have some detail around the antenna specs.

oxygenx
DD-WRT Guru

Joined: 11 Nov 2007
Posts: 566

Posted: Wed Jan 19, 2011 22:10 Post subject:

yup, i was a little surprise they included 3x3 mimo for both bands
_________________
Router: WNDR3300 (wl0: n-Only 5Ghz, WPA2-AES, wl1: g-Only, WPA-Mixed-Mixed)
WDS Node 1: WNDR3300 (wl0: n-Only 5Ghz, WPA2-AES, WDS-connected Router, wl1: g-Only WPA-Mixed-Mixed)
WDS Node 2: WRT54GL (g-Only, WPA-Mixed-Mixed WDS-connected to Router)
Modem: Cisco EPC3202
clients: Notebook 1, D-Link 323, PS3 Slim, Kathrein UFC960 connected to WDS Node 1 via Gigabit Switch. Notebook 2, Deskjet 6980 connected to WDS Node 2

Masterman
DD-WRT Guru

Joined: 24 Aug 2009
Posts: 2039
Location: South Florida

Posted: Wed Jan 19, 2011 22:20 Post subject:

oxygenx wrote:

yup, i was a little surprise they included 3x3 mimo for both bands

Only 5GHz...

It's 2x3 for the 2.4 spectrum, which makes sense..
_________________
Optware, the Right Way
Asus WL520gU
Asus WL500gPv2 x2
Asus WL500W
Asus RT-N10
Asus RT-N12
Asus RT-N16 x3
D-Link DIR-825B
Linksys WRT320Nv1
Linksys WRT600Nv1.1
Linksys WRT610Nv1
Linksys E2000
Netgear WNDR3300
TP-Link WR1043ND

oxygenx
DD-WRT Guru

Joined: 11 Nov 2007
Posts: 566

Posted: Wed Jan 19, 2011 22:40 Post subject:

oh true, 2x3 + 3x3 was indeed was i expected but for some reason i misread it
_________________
Router: WNDR3300 (wl0: n-Only 5Ghz, WPA2-AES, wl1: g-Only, WPA-Mixed-Mixed)
WDS Node 1: WNDR3300 (wl0: n-Only 5Ghz, WPA2-AES, WDS-connected Router, wl1: g-Only WPA-Mixed-Mixed)
WDS Node 2: WRT54GL (g-Only, WPA-Mixed-Mixed WDS-connected to Router)
Modem: Cisco EPC3202
clients: Notebook 1, D-Link 323, PS3 Slim, Kathrein UFC960 connected to WDS Node 1 via Gigabit Switch. Notebook 2, Deskjet 6980 connected to WDS Node 2

LOM
DD-WRT Guru

Joined: 28 Dec 2008
Posts: 6096

Posted: Thu Jan 20, 2011 0:50 Post subject:
It's Atheros based, innit? 4200/2 = 2100

Masterman
DD-WRT Guru

Joined: 24 Aug 2009
Posts: 2039
Location: South Florida

Posted: Thu Jan 20, 2011 3:50 Post subject:

LOM wrote:

It's Atheros based, innit?

4200/2 = 2100 Razz

My guess is Ralink due to the 3x3 MIMO on 5GHz radio...
_________________
Optware, the Right Way
Asus WL520gU
Asus WL500gPv2 x2
Asus WL500W
Asus RT-N10
Asus RT-N12
Asus RT-N16 x3
D-Link DIR-825B
Linksys WRT320Nv1
Linksys WRT600Nv1.1
Linksys WRT610Nv1
Linksys E2000
Netgear WNDR3300
TP-Link WR1043ND

altdel
DD-WRT Novice

Joined: 21 May 2010
Posts: 12

Posted: Thu Jan 20, 2011 6:35 Post subject: E4200 Chipset

Masterman wrote:

LOM wrote:

It's Atheros based, innit?

4200/2 = 2100 Razz

My guess is Ralink due to the 3x3 MIMO on 5GHz radio...

My guess would be: Broadcom 4718 / 4331 / 53115 with 64MB RAM and 16MB flash.

yousaf465
DD-WRT User

Joined: 12 Sep 2010
Posts: 330

Posted: Thu Jan 20, 2011 6:37 Post subject:

Masterman wrote:

LOM wrote:

It's Atheros based, innit?

4200/2 = 2100 Razz

My guess is Ralink due to the 3x3 MIMO on 5GHz radio...

I don't so, linksys can't survive without DD-wrt support.

Goto page 1, 2, 3 ... 45, 46, 47 Next

Display posts from previous:

Page 1 of 47

DD-WRT Forum Forum Index -> Broadcom SoC based Hardware

All times are GMT

Navigation

Jump to:

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You can attach files in this forum
You can download files in this forum