Posted: Thu Apr 14, 2011 2:21 Post subject: Use wndr3300 as a wireless adapter?
Hello. I am wondering if i can use a wndr3300 with DD-WRT as a gaming adapter. I have a wndr3500 without DD-WRT that i want to connect it to. But steps should be general as iam hopefully replacing this with an Asus model soon. Anyway my setup will be an xbox 360 connected to the wndr3300 that will connect to my 3500 wirelessly. Ive tried forwarding the wireless signal with no luck. Any ideas? Thanks!
but depending on the setup it might make more sense to use the wndr3300 as main router and the wnr3500 as client. because the wndr3300 has dual transmitters. it also depends on where you need the gigabit ports of the wnr3500. _________________ Router: WNDR3300 (wl0: n-Only 5Ghz, WPA2-AES, wl1: g-Only, WPA-Mixed-Mixed)
WDS Node 1: WNDR3300 (wl0: n-Only 5Ghz, WPA2-AES, WDS-connected Router, wl1: g-Only WPA-Mixed-Mixed)
WDS Node 2: WRT54GL (g-Only, WPA-Mixed-Mixed WDS-connected to Router)
Modem: Cisco EPC3202
clients: Notebook 1, D-Link 323, PS3 Slim, Kathrein UFC960 connected to WDS Node 1 via Gigabit Switch. Notebook 2, Deskjet 6980 connected to WDS Node 2
Joined: 04 Jan 2007 Posts: 11416 Location: Wherever the wind blows- North America
Posted: Thu Apr 14, 2011 15:24 Post subject:
On the 3300 unit..set one radio as a Client Bridge...the other as an AP. This will allow you to use both wireless and wired connection to the 3300...and maintain the connection to the 3500 wirelessly through the Client Bridge radio....and this is done with little to no bandwidth loss.
redhawk _________________ Donations have dwindled so testing is limited to C/CB and R/RB modes on just a few newer models. No old router testing performed any longer.
Looking for more test units (newer models only) for the project...got a brick?...PM me to make a hardware donation. (USA) A donation is not a debricking service....it is a way to "Give back" to the dd-wrt project.
I do NOT provide personal assistance through chat or phone....so please don't ask.