Posted: Mon Feb 05, 2007 11:18 Post subject: WRT54G Rev 3.1 mit orig US Firmware v4.30.5 - Probleme
Tag,
vorweg: ich habe seit Jahren WRT54G Router. Mein aktueller ist ein WRT54G - Revision 3.1.
Ich hatte eine deutsche Firmware drauf, gab nie Probleme, ich vermisste keine Features, ergo blieb sie drauf.
Ab und zu fliegt mal die Stromsicherung hier raus. Bis lang haben wir im Haus das Problem nicht gefunden, vielleicht Maderbiss..... Naja dadurch ist der WRT quasi schonmal stromlos mitten im Betrieb. Ob das allerdings das Problem ist weiss ich nicht, jedenfalls ab Dez 2006 fingen Probleme an:
1) DDNS Update klappte nicht mehr (lief Jahre problemlos), es kam oft nach der Autodiscon des Providers:
"Status: Ungewöhnliche Serverantwort. Stellen Sie sicher, dass Sie ordnungsgemäß mit dem Server verbunden sind."
Am DDNS Account passte alles, verbunden war ich auch - online halt. Das Problem ließ sich beim ersten mal umgehen, indem ich die DDNS Daten löschte und komplett neu eingab.
2) Das gleiche Spiel ging mit dem PPPoE Daten für meinen Provider los. Der Router konnte sich nicht verbinden. Daten löschen und neu eingeben - ging wieder.
Doch nur für kurze Zeit. Nach Rücksprache mit dem Linksys Support und Diskussion in anderen Foren habe ich erstmal die neuere US Firmware drauf gemacht. Das lief nun wieder ~3 Wochen Problemlos, trotz Stromausfällen - jedenfalls was die PPPoE Verbindungsdaten anging.
Neulich war ich wieder unterwegs und musste per Remote auf einen PC hier im LAN. Da stellte ich fest, das der DDNS Host nicht auf meine aktuelle IP verweiste. Gleiche Fehlermeldung wie oben - nur jetzt halt in englisch.
Da diese beiden Sachen essentiell - bzw sehr wichtig sind und eigentlich nicht ausfallen sollten, bin ich nun am überlegen.
Sollte ich mal eine DD-WRT Firmware drauf machen und testen? Gibt es hier auch solche Probleme? Das Problem mit der Sicherung lässt sich nicht so schnell lösen - sprich auch auf die DD käme dieser Stromausfall mal zu, nein - derzeit keine Lösung oder USV möglich.
Posted: Tue Apr 26, 2011 16:19 Post subject: Re: WRT54G Rev 3.1 mit orig US Firmware v4.30.5 - Probleme
MasterJM wrote:
...
"Status: Ungewöhnliche Serverantwort. Stellen Sie sicher, dass Sie ordnungsgemäß mit dem Server verbunden sind."...
Hallo, hast du das Problem lösen könnnen?
Ich habe mit dem gleichen Router, allerdings mit FW 4.30.7 das gleiche Problem, immer häufiger in letzter Zeit gibt es Probleme mit der DynDNS Anmeldung. Wenn ich dann auf die DDNS Unterseite gehe und lediglich die Einstellungen speichere klappt es vorübergehend wieder.
Aber das ist natürlich kein Zustand.
Ich scheue etwas vor einem FW-update, weil ich nicht weiß, ob es was bringt, wie man deinen Anmerkungen ja schon entnehmen kann...
Hm, weiß gar nicht mehr genau, ob der WRT wegen den Stromproblemen kaputt ging.
Jedenfalls habe ich auf dem WRT dann eh Tomato als FW gefahren, klappte alles wieder problemlos.
Dort gabs sogar die Möglichkeit einen zweiten DDNS Dienst quasi als Backup zu nutzen.
Seither eigentlich keine Probleme mehr gehabt, Tomato läuft quasi seit Jahren problemlos auf dem kleinen WRT.
Ah, ich habe hier auch einen GL, der macht eben neuerdings, also seit ein paar Monaten schon, sporadisch Probleme beim DynDNS mit dem von dir oben genannte Fehlermeldung.
Ich habe aber sowieso gar keine neue FW gefunden.
Ich hab jetzt erstmal den DynDNS Updater auf einem hinter dem Router liegenden Server (der immer läuft) eingesetzt, aber das ist halt auch nicht so zuverlässig.
Kannst du mir bitte einen Tipp geben, wie ich auf meinen LinkSys WRT54GL (Firmware-Version: v4.30.7) per SSH draufkomme?
Vielleicht einen Link zu einer Anleitung?
Ich finde da nichts.
EDIT: ich muss mich korrigieren. Nach einiger Lektüre finde ich andererorts doch allerhand. Aber es ist verwirrend. So ist z.B. unter:
- Reset (30-30-30)
- 192.168.1.1 (root;admin): Mini FW aufspielen
- Warten (ca. 3 Minuten) bis WLAN LED wieder an
- Power Cycle (30)
- Reset ...
- 192.168.1.1 (root;admin): Generic FW aufspielen (niemals Mega, LinkSys hat nämlich nur 4 MB Flash)
- Power Cycle
- Reset
- Konfigurieren
Hinweis: Unterbrechung des flashens oder Einspielen einer zu großen FW führt zum Brick
Originalanleitung:
Installation process from a stock Linksys firmware
1. READ the peacock announcement linked above.
2. Do a hard reset
You can HARD RESET by holding down the reset button on the back of the router for 30 seconds, then pulling the power cord for 30 seconds while STILL holding the reset button, and then plugging in the power cord for a final 30 seconds while STILL holding the reset button. You will hold the reset button in for 90 seconds without releasing it. Then release the reset button and wait for the router to finish doing whatever it's going to do. Usually the WLAN light will come on close to last in the boot sequence. Sometimes, however, the POWER light will keep flashing for a good while. Either way, once you're sure the router has done its thing, power cycle the router, by unplugging and replugging the power connector in the back of the router. There's no need to wait between unplugging and replugging.
3. Download the NEWD_MINI build generic 12548 Eko Build from here: ftp://dd-wrt.com/others/eko/V24_TNG/svn12548/dd-wrt.v24-12548_NEWD_mini.bin
4. You should check the MD5 HASH of the firmware after downloading it if it is available for your build. see Hashes & Checksums. Turn off and disable your firewall, turn off and disable your antivirus, and sign into your linksys router with your webbrowser.
5. Use the firmware upgrade web interface to update your router with dd-wrt. DO NOT close your browser, DO NOT interrupt the process, be EXTREMELY PATIENT, even after the firmware is already supposedly upgraded. Wait around for a while, and make sure it settles down and is definitely finished doing whatever it's going to do. The router needs time to rebuild the NVRAM after it has been flashed, and if you interrupt this you will regret it!
6. When three or so minutes pass and the wlan light comes back on, try and open the dd-wrt page at 192.168.1.1. If it opens, the process is complete. You should be asked to reset the password. Type username and passphrase in carefully.
7. Decide if you would like to keep the MINI version, or change to MICRO, STANDARD, VOIP, or VPN versions. DO NOT try to load a MEGA build on this router (see above). If you are keeping MINI, you are done, otherwise, continue
Read about the different versions' features here: What is DD-WRT?#File Versions. If you won't be needing the features in the larger versions such as standard, you may be able to increase the responsiveness of your router by getting the smallest version that includes the features you need. Also, you can always update to a larger version later if down the line you need the extra features.
8. Power cycle the router
9. Do a hard reset
10. Install the version of dd-wrt you want (again, you can't use MEGA... really)
11. Wait again for the process to complete and the lights to return to normal, and the webgui to be accessible at 192.168.1.1 showing the updated firmware. Give it at least 3 to five minutes.
12. Power cycle the router.
13. Do a hard reset