Epidural DD-WRT Novice
Joined: 20 Sep 2011 Posts: 1
|
Posted: Tue Sep 20, 2011 22:03 Post subject: Wake on WAN not working |
|
I've managed to get Wake on LAN working within the network (hence LAN) but I can't get WOW to work.
I've tried just about everything, but here is my current setup:
- DD-WRT v24 sp2 mini on an Asus RT-N10
- Port 9 forwarded to 192.168.1.254
- Static DHCP lease to 192.168.1.254 using intended WOL computer's MAC
- Startup command:
ip neigh change 192.168.1.254 lladdr ff:ff:ff:ff:ff:ff nud permanent dev br0
ip neigh add 192.168.1.254 lladdr ff:ff:ff:ff:ff:ff nud permanent dev br0
(ff:.. is replaced by real mac in same format)
- Using an Android app to send the magic packet to my network via 3G.
Now: the application sends fine when the phone is connected to the LAN and is sending to the broadcast address (192.168.1.255) and the computer awakens.
However: when sending over 3G, the router logs the incoming UDP request as follows:
Source IP Protocol Destination Port Number Rule
184.151.127.128 UDP discard Accepted
Why isn't it getting the magic packet to the LAN? The computer does not wake up when receiving the packet through WAN.
Not sure if it's of any consequence, but due to some other troubleshooting earlier, the firewall is turned off.
Any ideas? |
|