I have one of these routers and have been dilligently working on compiling the source code. I have been sucessfull on everything and the device will boot.
I have one issue, though, when the device goes to run through the startup scripts, I get nothing but permission denied issues. The only way I can get a prompt is to force a shell to load in the init script.
Then I have to use complete paths to get commands to execute. If I try to do an "/bin/ls", it just gives a return of a "." directory and all the information is bizarre.
I have done a bunch of research, and saw one article on this occuring with busybox and the LD_LIBRARY_PATH being set. I attempted to clear that variable, and still am obtaining the same result.
If anyone could point me in a direction to trying to get this resolved, it would be awesome!
Posted: Fri Jul 22, 2011 19:22 Post subject: News...
Well,
I have bricked this device, IE, erase the bootloader through the bootloader prompt.
I see no way through the serial line to dump a new image to the device, so that is that.
On the brighter side. Found two devices for $50 on ebay that I hope will at least boot. If so, then I am good to go to continue.
I also have a WNDR4000, which displayed the same permission denied issues. I was able to correct those issues on that device, so it looks very promising to have something available for this device real soon.
Great work. It's up and running in my unit. I'll test it a bit and give you some feedback.
Many, many thanks for this work!!!
Edit: it's been running in my unit for 6 days now without any problems. The only thing I've noticed is that the wireless clients list is always empty. The same with Status->Wireless->Wireless nodes.
Great work. It's up and running in my unit. I'll test it a bit and give you some feedback.
Many, many thanks for this work!!!
Edit: it's been running in my unit for 6 days now without any problems. The only thing I've noticed is that the wireless clients list is always empty. The same with Status->Wireless->Wireless nodes.
Great work! Thanks again!
No problem. I would guess that the empty client list is due to the fact that dd-wrt was mainly ported for broadcom devices, and it usually pulls much of this info from those extensions.
Posted: Fri Oct 21, 2011 7:33 Post subject: V2000 belkin N1, I've downloaded and installing
I run a fulltime webserver and host a profffesional teamspeak voice chat service for free. hoping this will give me better control of atteckers and better loging thanks will let you know who things goo!
BE AWARE:
This image will only work on V2000 devices!
It's Working and very well! would really like to be able to utilize the N1's built in display, if you would consider putting a little more to prefect what you have would be super super awesome and you would have 200++ grateful people here and more to come! again thanks a bunch it works, I just need to configure the thing lol =)
My touchpads can no longer see my hp printer since the upgrade, and it turns out that snmp could be the culprit. I cannot access this feature at all in the newest version of dd-wrt you used to create this image.. once again, great work.. but they have not included snmp in this build. What was the last version to use snmp, and can I downgrade now that I have the router flashed to dd-wrt? Which build would I use if this is possible?
Posted: Tue Nov 01, 2011 0:47 Post subject: Re: SNMP
MexicanPeso wrote:
Hmm,
My touchpads can no longer see my hp printer since the upgrade, and it turns out that snmp could be the culprit. I cannot access this feature at all in the newest version of dd-wrt you used to create this image.. once again, great work.. but they have not included snmp in this build. What was the last version to use snmp, and can I downgrade now that I have the router flashed to dd-wrt? Which build would I use if this is possible?
thanks in advance
Hmm i don't think you can just load on any particular DD-wrt at least i wouldn't dare unless the creator of this one confirms it to be true! BTW I use networking printing just fine but i use TCIP and networking copying and fax scanner on my brother 5500 all in one! look into changing protocols from SNMP to TCIP temporarily while you wait for a response from @JoyElctrc good luck! As progress with the Belkin N1 Vision V2000 Router i have it fully DD-wrt and love it! i love being able to host several wireless networks! look forward to an updated version were we could utilize or built in Belkin display but I'm sure kernel would have to be re-compiled with the mod for it!
HI5 hi5 hi5 HI5!