Thanks for the new firmware and now i can connect to the external drive
but there seems some bug, internet does not works sometimes and i have to restart the router for that
internet does not works sometimes and i have to restart the router for that
I managed to resolve spotty internet and slow speeds by cloning my computer's mac address to the router. I'm not sure if that had anything to do with it, but I haven't had those problems since I did that.
Posted: Sun Oct 09, 2011 18:15 Post subject: ASUS original sucks. DD-WRT MOD Much better!
Wow. Thank you for making this change in the DD-WRT!
At first I thought he bought a paper weight Acquired by having this router. By poorly developed software.
But with DD-WRT this mod everything works fine.
I have an ADSL modem in bridge mode, pppoe dialer With the router (ASUS) with active Wi-Fi and WPA2 encryption.
SMB = running
share name = ps2smb; path = /mnt/ps2smb
share name = storage; path = /mnt
You guys that have the RT-N13U B1 working have you tried a wireless device such as a phone?
I have posted in the Tech support thread (below)in this same forum my issue with trying to get my Nokia 5800 to work with it when I use this firmware. My Netbook works with the Wifi with this firmware. What I dont understand why my phone wifi wont see the router. I did test see the other thread. Yet my phone works fine with Wifi on my Asus WL-520GU using DD-WRT and other routers I gone too so I can't blame the phone. This is my last chance to get ideas.
Posted: Tue Oct 11, 2011 15:43 Post subject: led gpio
The source code for LED is attached. This is derived from the source code for original gpio. The additions are "get" and "led".
Usage:
led_gpio <get | poll | enable | disable> <pin>
led_gpio <led gpio on off blinks rests times>
gpio: gpio number of the board
on: number of ticks that the LED will be bright
off: number of ticks that the LED will be dark
blinks: number of on-offs that the LED will blink
rests: number of on-offs that the LED will rest
times: number of blinks before the LED stops
Note: 1 tick is equal to 100ms. The maximum number is currently 4000
The "get" option is for use in shell scripts. It returns with current status of button.
The power LED seems the only one that can be controlled. Others seem to be directly under hardware control. It corresponds to gpio 7. The options for led might be confusing at first, so here are a few examples.
You guys that have the RT-N13U B1 working have you tried a wireless device such as a phone?
I have posted in the Tech support thread (below)in this same forum my issue with trying to get my Nokia 5800 to work with it when I use this firmware. My Netbook works with the Wifi with this firmware. What I dont understand why my phone wifi wont see the router. I did test see the other thread. Yet my phone works fine with Wifi on my Asus WL-520GU using DD-WRT and other routers I gone too so I can't blame the phone. This is my last chance to get ideas.
I am also experiencing a problem. The net on both my pc and laptop is working(partially) but not on my mobile galaxy tab though i can connect the wifi on the mobile but cant access the internet.
I am also experiencing a problem. The net on both my pc and laptop is working(partially) but not on my mobile galaxy tab though i can connect the wifi on the mobile but cant access the internet.
I also tested with changing the default router IP address from 192.168.1.1 to something I like to use like 192.168.123.xxx then it wont route to internet even though I have IP address,gateway and so forth from ISP. In that condition Wifi Connected on my Nokia 5800. When I put the default IP address back to 192.168.1.1 I get no connection to my Nokia Wifi but Have internet access on the wired lan.
I am glad someone else looked at this issue so It not just me.
I just wonder where do we go from here?
People are talking about the lack of usb support. I dont know if I install this firmware or the 17027 listed on the webpage. They really made the rev B1 without the usb drivers even with 8MB of flash?
^ mind explaining a bit further with pics if possible
Setup tab, third one over is mac clone. Click the option to copy the computer's mac address, save, apply, reboot everything (including the modem).
I tried that already but still the internet stops responding randomly. I need to reconnect/repair the wifi to solve the problem. I wasn't experiencing such problem in the old firmware. I already tried it on my other computers and also on my friend's laptop.