DIR-685 Support?

Post new topic   Reply to topic    DD-WRT Forum Forum Index -> ARM or PPC based Hardware
Goto page 1, 2  Next
Author Message
GeneJin
DD-WRT Novice


Joined: 20 Nov 2009
Posts: 1

PostPosted: Fri Nov 20, 2009 5:46    Post subject: DIR-685 Support? Reply with quote
Hi, any support for DIR-685 yet?

Thanks,
Eugene
Sponsor
bbb_forever
DD-WRT User


Joined: 10 Oct 2009
Posts: 202

PostPosted: Fri Dec 04, 2009 11:29    Post subject: Re: DIR-685 Support? Reply with quote
GeneJin wrote:
Hi, any support for DIR-685 yet?

Thanks,
Eugene


It's not on the list:
http://www.dd-wrt.com/wiki/index.php/Supported_Devices#D-Link

And it probably won't be supported unless someone first donates and sends a unit to them, so they can create a build and test it.

_________________
.
.
Get off my channel, or face the wrath of my 2.4Ghz Wireless-N channel-bonded 40Mhz wide-band interference!

My routers:
- 1 Linksys E3000
- 4 Linksys E2000
- 4 Linksys WRT320n [DD-WRT svn13575 std-nokaid] working well in WDS setup, 5Ghz N-speeds only.
- 2 Airlink AR670W [DD-WRT build 14537] working well in WDS setup, 2.4Ghz N-speeds only.
- 2 Netgear WDNR3300 [DD-WRT svn13577 std-nokaid] working well in AP-Repeater-Bridge setup, 5Ghz N-speeds only.
- Airlink AR325W G-router and Belkin F5D7230-4 v1444 [DD-WRT v23 sp2 micro] working well in Repeater-Bridge setup, G-speeds only.
- D-Link DI-614+ B-router, sitting around, wanna buy it?

Recent fixes timeline:
http://svn.dd-wrt.com:8000/dd-wrt/timeline?from=01%2F11%2F2010&daysback=30&changeset=on&update=Update

Linksys 320n Path: Downloads › others › eko › V24-K26 › svn13575

Airlink AR670W Path: Downloads › others › eko › BrainSlayer-V24-preSP2 › 12-28-09-r13525 › airlink101-ar670w
Sash
DD-WRT Guru


Joined: 20 Sep 2006
Posts: 17415
Location: Hesse/Germany

PostPosted: Sun Dec 06, 2009 13:25    Post subject: Re: DIR-685 Support? Reply with quote
GeneJin wrote:
Hi, any support for DIR-685 yet?

Thanks,
Eugene


do
http://www.dd-wrt.com/site/support/router-detection

_________________
GEGEN die EEG-UMLAGE auf EIGENVERBRAUCH!
_________________
Forum Guidelines...How to get help
&
Forum Rules
&
RTFM/STFW
&
Throw some buzzwords into the WIKI search Exclamation
_________________
I'm NOT rude, just offer pure facts!
_________________
Atheros (TP-Link & Clones, etc ) debrick service in EU
_________________
Guide on HowTo be Safe, Secure and Protect Your Online Anonymity!
lativ2
DD-WRT Novice


Joined: 15 Aug 2011
Posts: 1

PostPosted: Mon Aug 15, 2011 16:04    Post subject: Reply with quote
Hi,
hire is link to tech spec,

Looks good :
The DIR-685 has 64 MB of RAM and 32 MB of flash and a 2x2 draft 802.11n radio based on a Ralink RT2880F 2T3R MAC/BB and RT2850L 2.4/5 GHz 2T3R transceiver. The radio, however, is locked to single-band 2.4 GHz operation. The processor could not be determined due to a soldered-in radio module over an RF shield. It does not appear Ubicom-based, however, since Ubicom's signature automatic QoS features are not present in the 685.


http://www.dslreports.com/forum/r22607966-DLinks-new-DIR685-is-speed-daemon[
dalelovelace
DD-WRT Novice


Joined: 07 Sep 2011
Posts: 1

PostPosted: Wed Sep 07, 2011 23:59    Post subject: Reply with quote
Posted on the back of the DIR-685 router, and on the inside, is FCC-ID RRK-WMPND02A1. I checked this FCC-ID at FCC.gov and it doesn't show up.

Since the radio module is soldered in over the CPU you can't tell what it is by examination, however according to a post on dsl-reports it seems to be a Ralink RT2880F PU 266MHz with 64MB RAM and 32MB Flash.

I'm linking several hi res pictures I took of the insides to see if this will help. I have one of these that I'm not using right now as I have replaced it with a Belkin that will run dd-wrt! Will be happy to try any build on it if someone is nice enough to try one. I don't have a jtag cable, but I'm going to order one today so I can get more info on this great router.

http://daleandkim.com/DIR-685-receiver-side.jpg
http://daleandkim.com/DIR-685-switchside.jpg
http://daleandkim.com/DIR-685-chip1.jpg
http://daleandkim.com/DIR-685-chip2.jpg
http://daleandkim.com/DIR-685-chip3.jpg
samurai123
DD-WRT Novice


Joined: 04 Feb 2011
Posts: 20

PostPosted: Thu Sep 08, 2011 1:44    Post subject: Reply with quote
Besides the RF module, it has Cortina CS3516 SoC.
Sash
DD-WRT Guru


Joined: 20 Sep 2006
Posts: 17415
Location: Hesse/Germany

PostPosted: Thu Sep 08, 2011 8:15    Post subject: Reply with quote
Quote:
Processor StorLink SL3516 (ARM-9 300MHx)


not supported.
the willigear boards run an sl3512 cpu. so the board is maybe capable running ddwrt if linux if running and we get an donation.

moved to the ixp forum!

_________________
GEGEN die EEG-UMLAGE auf EIGENVERBRAUCH!
_________________
Forum Guidelines...How to get help
&
Forum Rules
&
RTFM/STFW
&
Throw some buzzwords into the WIKI search Exclamation
_________________
I'm NOT rude, just offer pure facts!
_________________
Atheros (TP-Link & Clones, etc ) debrick service in EU
_________________
Guide on HowTo be Safe, Secure and Protect Your Online Anonymity!
olympuse-FC
DD-WRT Novice


Joined: 08 Sep 2011
Posts: 1

PostPosted: Thu Sep 08, 2011 9:41    Post subject: Re: DIR-685 Support? Reply with quote
Sash wrote:
GeneJin wrote:
Hi, any support for DIR-685 yet?

Thanks,
Eugene


do
http://www.dd-wrt.com/site/support/router-detection


Many Thanks !

i find the solution too
pintoyac
DD-WRT Novice


Joined: 19 Oct 2011
Posts: 1

PostPosted: Wed Oct 19, 2011 12:43    Post subject: Reply with quote
How much money would be needed to buy this router? I have no problem donating in order for it to be supported, D-Link's firmware is a joke
chengsheng16
DD-WRT Novice


Joined: 06 Oct 2011
Posts: 1

PostPosted: Fri Oct 21, 2011 9:37    Post subject: Re: DIR-685 Support? Reply with quote
GeneJin wrote:
Hi, any support for DIR-685 yet?

Thanks,
Eugene

Support DIR -615
Jivatman
DD-WRT Novice


Joined: 12 Nov 2011
Posts: 3

PostPosted: Sat Nov 12, 2011 20:10    Post subject: DIR-685 SDK ??? Reply with quote
I found GPL sources for DIR-685

ftp://gpl.dlink.com/DIR-685/DIR-685_GPL_061709.tgz
lokistrategiesinc
DD-WRT Novice


Joined: 25 Nov 2011
Posts: 2

PostPosted: Fri Nov 25, 2011 5:59    Post subject: Re: DIR-685 SDK ??? Reply with quote
Jivatman wrote:
I found GPL sources for DIR-685

ftp://gpl.dlink.com/DIR-685/DIR-685_GPL_061709.tgz


So what can I do with a GPL linux source code? (I get the feeling this is a painfully newbish question).
Sash
DD-WRT Guru


Joined: 20 Sep 2006
Posts: 17415
Location: Hesse/Germany

PostPosted: Thu Jan 19, 2012 12:50    Post subject: Reply with quote
we need a serial port log.
_________________
GEGEN die EEG-UMLAGE auf EIGENVERBRAUCH!
_________________
Forum Guidelines...How to get help
&
Forum Rules
&
RTFM/STFW
&
Throw some buzzwords into the WIKI search Exclamation
_________________
I'm NOT rude, just offer pure facts!
_________________
Atheros (TP-Link & Clones, etc ) debrick service in EU
_________________
Guide on HowTo be Safe, Secure and Protect Your Online Anonymity!
lokistrategiesinc
DD-WRT Novice


Joined: 25 Nov 2011
Posts: 2

PostPosted: Thu Jan 19, 2012 18:58    Post subject: Reply with quote
I own a DIR-685. What is a Serial Port Log(sorry I'll Google it later), and how can I get it?
samurai123
DD-WRT Novice


Joined: 04 Feb 2011
Posts: 20

PostPosted: Sun Jan 22, 2012 18:20    Post subject: Reply with quote
Here is the serial port log

ILI9322_init......
Enabling TVE controller
@@===in gpio0_16high value 110000

Storlink SL351x Boot Loader [Linux2], version 1.0.9
Built by linux, 11:45:14, Jun 30 2009

Alpha version v0.5 SVN Revision 147

Processor: SL3516c3
CPU Rate: 300000000
AHB Bus Clock:150MHz Ratio:2/1
MAC 1 Address: 00:xx:yy:zz:xx:yy
MAC 2 Address: 00:xx:yy:zz:yy:zz
inet addr: 192.168.0.1/255.255.255.0
==> enter ^C to abort booting within 1 seconds ......
Load kernel from 0x30040000 to 0x1600000 size 11866304
v3 check
Image header (0x00000024):
magic : 0x20080321
size : 11866144 (0xb51020)
offset : 0x00000000
devname: '/dev/mtdblock/1'
digest : Advance to next block : offset=11866304(0xb510c0), size=11866304(0xb510c0)
Uncompressing Linux...7zip decompressing ...

7zip decompress success

done, booting the kernel.

FTC_FOTG2XX : registered host c7c7cc00

FTC_FOTG2XX_1 : registered host c7c7c400

test_interrupt interrupt


init started: BusyBox v1.00 (2009.07.27-14:12+0000) multi-call binary

Starting pid 393, console /dev/console: '/etc/init.d/rcS'
[/etc/init.d/S03config.sh]
Mounting proc and var ...
Using /lib/modules/ufsd.ko
ufsd: module license 'Commertial product' taints kernel.

ufsd: driver loaded

UFSD version 6.1 (Jul 31 2007, 21:51:29)

NTFS read/write support included

$Id: ufsdvfs.c,v 1.109 2007/07/31 12:01:57 shura Exp $

ufsd: address 0xbf000000

Starting udevd...
Starting udevstart...
Starting udevstart...
Start xmldb ...
[/etc/scripts/misc/profile.sh] get ...
[/etc/scripts/misc/defnodes.sh] ...
[/etc/defnodes/S10setext.sh] ...
PHP [/etc/defnodes/S11setnodes.php] ...
PHP [/etc/defnodes/S12features.php] ...
PHP [/etc/defnodes/S13flashspeed.php] ...
[/etc/defnodes/S14wps_upnp.sh] ...
PHP [/etc/defnodes/S20setnodes.php] ...
devdata: not found
VFS: Can't find ext3 filesystem on dev mtdblock5.

VFS: Can't find an ext2 filesystem on dev mtdblock5.

FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!

FAT: invalid media value (0xbb)

VFS: Can't find a valid FAT filesystem on dev mtdblock5.

FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!

FAT: invalid media value (0xbb)

VFS: Can't find a valid FAT filesystem on dev mtdblock5.

SQUASHFS error: Can't find a SQUASHFS superblock on mtdblock5

ufsd: failed to mount mtdblock5

mount: Mounting /dev/mtdblock/5 on /www/locale/alt failed: Invalid argument
PHP [/etc/defnodes/S40brand.php] ...
PHP [/etc/defnodes/S42features.php] ...
[/etc/scripts/misc/defnodes.sh] Done !!
[/etc/templates/timezone.sh] ...
zone : 5
gen :
[/etc/templates/logs.sh] ...
[/var/run/logs_run.sh] ...
Using /lib/modules/nas_gpio_access.ko
nas_gpio Access Init.

start fresetd ...
Inserting modules ...
Using /lib/modules/ifresetcnt.ko
Network interface reset count v1.0

Factory reset time : 5 secs
System reset time : 2 secs
Storlink eth0 address = 00265A23166A

Can't find version control

GMAC-0 Flow Control Enable.

Storlink eth0 address = 00265A23166A

Enable MAC Flow Control...

set interrupt f

Storlink eth1 address = 00265A23166B

Can't find version control

GMAC-1 Flow Control Enable.

Storlink eth1 address = 00265A23166B

Enable MAC Flow Control...

[/etc/templates/webs.sh] start ...
[/var/run/webs_start.sh] ...
Starting HTTPD ...
[/etc/init.d/S03config.sh] done!
[/etc/init.d/S10system.sh]
start scheduled ...
[/etc/templates/scheduled.sh] start ...
[/var/run/scheduled_start.sh] ...
Start scheduled ...
setup layout ...
[/etc/scripts/layout.sh] ...
[/var/run/layout_start.sh] ...
Start router layout ...
device eth0 entered promiscuous mode

br_stp_recalculate_bridge_id: p->dev->dev_addr[0]-[5]= 0:26:5a:23:16:6a

interface ra0 does not exist!
joel disable stun ..
[/etc/scripts/network_usb.sh] start...
insmod: /lib/modules/2.6.15: No such file or directory
Using /lib/modules/sxuptp.ko
alloc success ffc7c000 dma 7560000

alloc success ffc9c000 dma 7580000

insmod: /lib/modules/2.6.15: No such file or directory
Using /lib/modules/sxuptp_generic.ko
usbcore: registered new driver sxuptp_generic

insmod: /lib/modules/2.6.15: No such file or directory
Using /lib/modules/jcp.ko
insmod: /lib/modules/2.6.15: No such file or directory
Using /lib/modules/jcp_cmd.ko
start LAN ...
[/etc/templates/lan.sh] ...
[/var/run/lan_start.sh] ...
Start LAN (br0/192.168.0.1/255.255.255.0)...
Start DHCP server (br0) ...
Start igmp ...
[/etc/templates/igmpproxy.sh] start ...
[/var/run/igmpproxy_start.sh] ...


igmp snooping is disabled ...

IGMP proxy is not enabled!
enable LAN ports ...
[/etc/scripts/enlan.sh] ...
!!!!!!!!!!!!!!! TODO [/etc/scripts/enlan.sh] !!!!!!!!!!!!!!
start WLAN ...
[/etc/templates/wlan.sh] start ...
[/etc/templates/wifi/wlan_sch.sh] stop ...
Hello from hostapd.ra0.conf
[/var/run/wlan_start.sh] ...
Start WLAN interface ra0 ...
[/etc/templates/wps.sh] pre_setie ...
GMAC-1 link down

restart WLAN driver ...
Using /lib/modules/rt2880_iNIC.ko
RT2880 iNIC: 802.11n WLAN PCI driver v2.0.0.0 (Jan. 15, 2009)

RT2880 iNIC: pci dev 0000:00:0c.0 (id 1814:0801 rev 00)

PCI: enabling device 0000:00:0c.0 (0140 -> 0142)

rt->regs = ca820000

===> Get MAC from iNIC

============= Init Thread ===================

RacfgTaskThread pid = 761

RacfgBacklogThread pid = 762

ra0: Ralink iNIC at 0xca820000, 00:43:0c:00:00:00, IRQ 67

SIOCSIFTXQLEN: No such device
/proc/net/br_forward_br0: cannot create
Start WLAN interface ra0 Done !!!
[/etc/templates/wifi/wlan_sch.sh] start ...
[/var/run/wlan_sch_start.sh] ...
[/etc/templates/wifi/wlan_sch_run.sh] restart ...
[/var/run/wlan_sch_run_start.sh] ...
Start WLAN layout ...
device ra0 entered promiscuous mode

br_stp_recalculate_bridge_id: p->dev->dev_addr[0]-[5]= 0:43: c: 0: 0: 0

br_stp_recalculate_bridge_id: p->dev->dev_addr[0]-[5]= 0:26:5a:23:16:6a

[/etc/templates/wps.sh] setie ...
Using specified config file : /var/run/wps.config
Configuration file: /var/run/hostapd.ra0.conf
iNIC Open ra0

BssidNum=1

ADDR0 = 58000008, ADDR1 = 58100008

CMD = 0156, STATUS = 04a0

LATENCY = 00, CACHE LINE SIZE = 08

INT LINE = 67

Reset Card

ADDR0 = 58000008, ADDR1 = 58100008

CMD = 0156, STATUS = 04a0

INT LINE = 67

### LATENCY = 20, CACHE LINE SIZE = 08

PDMA_RST_IDX = 0

PDMA_GLO_CFG = 00000020

TX_MAX_CNT0 = 00000080

2. reg = 00000020

2. PDMA_GLO_CFG = 0000006d, reg = 00000065

RACFG_CMD_BOOT_NOTIFY

Op mode = 1

Wait for boot done...

Open file: /etc/Wireless/RT2880/iNIC_ap.bin

Open file: /var/run/RT2880AP.dat

RACFG_CMD_BOOT_NOTIFY

Open file: /etc/Wireless/RT2880/iNIC_ap.bin

Open file: /var/run/RT2880AP.dat

RACFG_CMD_BOOT_INITCFG(0)

RACFG_CMD_BOOT_INITCFG(0)

Send Init Cfg Data Done(1 packets)

WARNING! iNIC profile ack sequence 0<->-1 mismatched,duplicated packet? ignore...

RACFG_CMD_BOOT_UPLOAD(0)

RACFG_CMD_BOOT_UPLOAD(1)

RACFG_CMD_BOOT_UPLOAD(2)


CRC:01 08 14 18 49 86 1c 7f 22 32 2e 30 2e 30 2e 30 22 00 00 00 32 30 30 39 30 33 31 30 00 00 00 00 00 00 00 00 78 83 07 00

Send RT2880 Firmware Done

===================================

version: "2.0.0.0"

size: 492408 bytes

date: 20090310

===================================


Send STARTUP to RT2880

Close Firmware file

RACFG_CMD_BOOT_STARTUP

Update MAC(0)=00:26:5a:23:16:6a

ralink_init: Initiating ralink_wireless_event_init...
Using interface ra0 with hwaddr 00:26:5a:23:16:6a and ssid 'Gate'
=>=>=> set ssid to Gate
start Application ...
[/usr/sbin/submit] GROUP_ADD ...
GMK - hexdump(len=32): cc cc f8 67 68 90 28 94 5b 9f 2d 54 d6 b4 3e c5 0f a1 c7 d2 0d 68 14 41 be fd ba 4e 81 51 43 bc
GTK - hexdump(len=32): f4 ae 0b 6c b8 44 a3 6a f9 1b 91 ef 0c 2c 31 21 1d 41 dc 1b 3e 53 75 7a 8b 05 b3 0b 38 e9 f0 96
hostapd_setup_interface: return 0
[/usr/sbin/submit] USER_ADD ...
[/usr/sbin/submit] PURE-FTPD ...
[/etc/templates/user.sh] ...
[/usr/sbin/submit] NET_ACCESS ...
[/etc/templates/pure_ftpd.sh] ...
[/var/run/user_add.sh] ...
rm: cannot remove `/var/smbpasswd[/etc/templates/group.sh] ...
[/var/run/group_add.sh] ...
': No such file or directory
Start smbd...
[/usr/sbin/submit] UPNP_AV_START ...
[/usr/sbin/submit] ITUNES_START ...
[/etc/templates/upnp_av.sh] ...
pure_ftpd is disabled !
[/var/run/upnp_av_start.sh] ...
No: [/var/run/prescan_start.sh] ...
[/etc/templates/network_access.sh] ...
not found
Upnp-av server is disabled !
[/usr/sbin/submit] BT_START ...
[/etc/templates/itunes_server.sh] ...
start Guest Zone
[/etc/templates/bt.sh] ...
[/etc/templates/gzone.sh] ...
[/var/run/bt_start.sh] ...
generate_start !
BT is disabled !
[/var/run/itunes_server_start.sh] ...
No: not found
[/var/run/gzone_start.sh] ...
[/var/run/network_access_start.sh] ...
Start smbd...
[/etc/templates/enable_gzone.sh] ...
[/var/run/enable_gzone_start.sh] ...
start RG ...
add passwd from file
[/etc/templates/rg.sh] start ...
[/var/run/rg_start.sh] ...
startsmbfilepwent_internal: file /var/smbpasswd did not exist. File successfully created.
Added user nobody.
Using /lib/modules/ifresetcnt.ko
insmod: cannot insert `/lib/modules/ifresetcnt.ko': File exists (-1): File exists
insmod: /lib/modules/2.6.15: No such file or directory
insmod: ip_conntrack_ike_m.ko: no module by that name found
insmod: /lib/modules/2.6.15: No such file or directory
insmod: ip_conntrack_esp_m.ko: no module by that name found
insmod: /lib/modules/2.6.15: No such file or directory
insmod: ip_conntrack_proto_esp_m.ko: no module by that name found
insmod: /lib/modules/2.6.15: No such file or directory
insmod: ip_nat_proto_esp_m.ko: no module by that name found
iptables: No chain/target/match by that name
sendto_unsock(/var/run/portt.unixsocket, flush)
/proc/sys/net/ipv4/arp_flood_burst: cannot create
/proc/sys/net/ipv4/arp_flood_cost: cannot create
start DNRD ...
[/etc/templates/dnrd.sh] ...
[/var/run/dnsmasq_start.sh] ...
Start Dnsmasq ...
Start telnetd ...
start UPNPD ...
[/etc/templates/upnpd.sh] ...
[/var/run/upnpd_start.sh] ...
Starting UPnP ...
[/var/run/upnp_alive.sh] ...
start WAN ...
Set WAN port media type 0
rtl8366rb_setEthernetPHY port 4 type 0

[/etc/templates/wan.sh] start ...
[/var/run/wan_start.sh] ...
insmod: /lib/modules/2.6.15: No such file or directory
insmod: sw_tcpip.ko: no module by that name found
It is the DHCP mod start!!
Storlink eth1 address = 001E37DA242F

Can't find version control

GMAC-1 Flow Control Enable.

Storlink eth1 address = 001E37DA242F

Enable MAC Flow Control...

Clone WAN MAC : 00:aa:bb:cc:dd:ee
DHCP client on WAN(eth1) CloneMAC(00:aa:bb:cc:dd:ee) ...
start LLD2D ...
[/etc/templates/lld2d.sh] ...
[/var/run/lld2d_start.sh] ...
Start LLD2 daemon ...
start fcrss_server ...
[/etc/templates/fcrss_server.sh] start...
GMAC-1 link down

start Neaps ...
[/etc/templates/neaps.sh] start ...
[/var/run/neaps_start.sh] ...
Start Neap Server ...
start igmpproxy ...
[/etc/templates/igmpproxy.sh] start ...
[/var/run/igmpproxy_stop.sh] ...
IGMP proxy is not started !
[/var/run/igmpproxy_start.sh] ...


igmp snooping is disabled ...

IGMP proxy is not enabled!
start LCD Display ...
[/etc/templates/lcd_display.sh] ...
start Wake on LAN ...
[/etc/init.d/S10system.sh] done!
[/etc/templates/wol.sh] ...
rcS done!

Starting pid 1308, console /dev/console: '/bin/sh'


BusyBox v1.00 (2009.07.27-14:12+0000) Built-in shell (msh)
Goto page 1, 2  Next Display posts from previous:    Page 1 of 2
Post new topic   Reply to topic    DD-WRT Forum Forum Index -> ARM or PPC based Hardware All times are GMT

Navigation

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You cannot download files in this forum