Author
Message
TendaW311R+ DD-WRT User Joined: 19 Oct 2011 Posts: 354
Posted: Fri Jan 27, 2012 20:22 Post subject:
kapastratos wrote: Without a serial console, you can`t do anything about it.
so this is what you have to do:
1 - clean the board with some alcohol
2 - make a good quality photo
3 - upload it here
I wanna see how bad is it and if it can be fixed.
OK, tomorrow I will upload photo
Back to top
Sponsor
TendaW311R+ DD-WRT User Joined: 19 Oct 2011 Posts: 354
Posted: Sat Jan 28, 2012 11:24 Post subject:
TendaW311R+ wrote: kapastratos wrote: Without a serial console, you can`t do anything about it.
so this is what you have to do:
1 - clean the board with some alcohol
2 - make a good quality photo
3 - upload it here
I wanna see how bad is it and if it can be fixed.
OK, tomorrow I will upload photo
Hi again. this is damage part. Please see it. Is there any way to repair it ? Thanks
Back to top
kapastratos DD-WRT Novice Joined: 04 Oct 2008 Posts: 33 Location: Romania
Posted: Sat Jan 28, 2012 12:22 Post subject:
this is the best picture that you were able to make? please make a good quality picture, this is a bad picture and I am unable to see the traces...
Back to top
TendaW311R+ DD-WRT User Joined: 19 Oct 2011 Posts: 354
Posted: Sat Jan 28, 2012 12:24 Post subject:
kapastratos wrote: this is the best picture that you were able to make? please make a good quality picture, this is a bad picture and I am unable to see the traces...
OK, but I am going to make it, after one hour.
Back to top
TendaW311R+ DD-WRT User Joined: 19 Oct 2011 Posts: 354
Posted: Sat Jan 28, 2012 13:05 Post subject:
TendaW311R+ wrote: kapastratos wrote: this is the best picture that you were able to make? please make a good quality picture, this is a bad picture and I am unable to see the traces...
OK, but I am going to make it, after one hour.
This is the best picture, that I can do
Back to top
TendaW311R+ DD-WRT User Joined: 19 Oct 2011 Posts: 354
Posted: Sat Jan 28, 2012 16:54 Post subject:
Please help me
Back to top
kapastratos DD-WRT Novice Joined: 04 Oct 2008 Posts: 33 Location: Romania
Posted: Sat Jan 28, 2012 17:32 Post subject:
OK, I did a high quality photo of my router, and this is what you have to do:
- Scratch the red points (you need a magnifier)
- Solder 2 wires with a 15W soldering iron...more than that and you will deteriorate the pcb (you need a magnifier)
- Check the wiring to avoid doing any bridges.
- Follow my first post and you will be able to recover your router.
Good luck.
Back to top
TendaW311R+ DD-WRT User Joined: 19 Oct 2011 Posts: 354
Posted: Sat Jan 28, 2012 18:28 Post subject:
This is my motherboard. Please see it and tell me may I solder on RX. Is there any other pins, when I can solder on RX. Thanks for all help and picture too
Back to top
kapastratos DD-WRT Novice Joined: 04 Oct 2008 Posts: 33 Location: Romania
Posted: Sat Jan 28, 2012 18:53 Post subject:
dude, do you see the picture that I posted? I already told you where to solder. good luck
Back to top
TendaW311R+ DD-WRT User Joined: 19 Oct 2011 Posts: 354
Posted: Sat Jan 28, 2012 18:55 Post subject:
kapastratos wrote: dude, do you see the picture that I posted? I already told you where to solder. good luck
Put my RX is damage ( that you show in your picture ). So this is the end of the router, right ?
Back to top
kapastratos DD-WRT Novice Joined: 04 Oct 2008 Posts: 33 Location: Romania
Posted: Sat Jan 28, 2012 19:02 Post subject:
I don`t see from your picture, I think you can solder there...that`s why I told you to send me a good quality picture...not a zoomed one!
Back to top
TendaW311R+ DD-WRT User Joined: 19 Oct 2011 Posts: 354
Posted: Sat Jan 28, 2012 19:12 Post subject:
May be this one is good. If it is not. Sorry for that
Back to top
TendaW311R+ DD-WRT User Joined: 19 Oct 2011 Posts: 354
Posted: Sat Jan 28, 2012 19:15 Post subject:
Are there any other pins for TX, RX ?
Back to top
TendaW311R+ DD-WRT User Joined: 19 Oct 2011 Posts: 354
Posted: Sat Jan 28, 2012 19:28 Post subject:
TendaW311R+ wrote: Are there any other pins for TX, RX ?
tomorrow I will try with better picture and will post it here
Back to top
kapastratos DD-WRT Novice Joined: 04 Oct 2008 Posts: 33 Location: Romania
Posted: Sat Jan 28, 2012 20:16 Post subject:
no, there are no other pins, they go directly to the CPU!
Back to top