Client Mode in Dir-600 is now working properly. The only thing that needs to pay attention is that
under WAN Connection Type, static ip must be selected. For the rest, refer to the attached screenshot.
Anyhow, repeater mode and repeater bridge mode are still NOT working.
D-LINK DIR-600 with DD-WRT build 13064
IP: 192.168.1.2
SUB: 255.255.255.0
GATEWAY: 192.168.1.1
LOCAL DNS: 192.168.1.1
WIRELESS MODE REPETEAR-BRIDGE
WPA2 B+G MIXED channel 10
DHCP not found in this mode
WAN not found in this mode
Here ok, It works for cable, but when create virtual interface ra1 for repetear, ra0 lost connection with AP. Evalue removing security wireless, firewall, rounting, etc etc, and no way. Logically the repetear mode does not work either.
We will continue trying. Regards
I also have a dir600b1, I can not use the wep on the client mode, but I can successfully connect the AP without encryption, someone have the same situation?
I also have a dir600b1, I can not use the wep on the client mode, but I can successfully connect the AP without encryption, someone have the same situation?
I also have a dir600b1, I can not use the wep on the client mode, but I can successfully connect the AP without encryption, someone have the same situation?
Joined: 29 Jan 2010 Posts: 113 Location: Aveiro, Portugal
Posted: Fri Jul 15, 2011 8:21 Post subject:
ryshard wrote:
Hi
Anyone fix it ? I've got the same problem.
3togo wrote:
Neither do I.
sbkk wrote:
I also have a dir600b1, I can not use the wep on the client mode, but I can successfully connect the AP without encryption, someone have the same situation?
Upgrade first.Since build 16214 wep is working well.Otherwise run this iwconfig ra0 key xxxxxxxxx for the client mode.
Regards
Jorge Silva _________________ »»» Marooned »»» by Pink Floyd