I have installed the version R15962 on my brand new DIR-600 Rev. Bx and everything is working OK.
The rev. Bx has the same 32Mb Ram and 4Mb flash as others revisions.
The only problem is the power led that is orange instead of Green. (This probably can be corrected by gpio
I have installed the version R15962 on my brand new DIR-600 Rev. Bx and everything is working OK.
The rev. Bx has the same 32Mb Ram and 4Mb flash as others revisions.
The only problem is the power led that is orange instead of Green. (This probably can be corrected by gpio
Thats all correct, but loopback for your port forwardings wont work anymore with this release.
Hello
I have the DIR-600 rev Bx router and i have problem flashing it with dd-wrt firmware. I try with R15962 and r18024 version in web interface and bootloader, no luck.
Someone can help?
Thank you!
Hello
I have the DIR-600 rev Bx router and i have problem flashing it with dd-wrt firmware. I try with R15962 and r18024 version in web interface and bootloader, no luck.
Someone can help?
Thank you!
I have tested the R18024 and the LAN ports are disabled.
Im using now r18007, but the sshd daemon is missing, so i can manage the router only by GUI or Telnet.
Dear all,
I have just successfully flashed the D-LINK DIR-600 Rev.B2 with r18024, and LAN ports are not working. Is there any workaround to enable the LAN ports? I would like to try flashing to previous version (r18007?) but not sure it is safe to do via WiFi, the only way I communicate with my D-LINK currently.
Navigate around there and you can choose between 15778 ,15940 or 15962 they all work.
Don t expect wonders.
Before flashing read the wiki about recovering and flashing of the unit.
I tried 15962 on a used DIR 600 I purchased recently and noticed that wireless transfer speeds are still way too low. What are the wireless settings are you using to get the best transfer speeds? I am still unable to get anything higher than 4 mbit per second (around 500kB/sec). I am sure I must be missing something in the wireless settings.
I bought a D-Link 600 B5E F / W Ver. 2.10 I read somewhere that it is not compatible router with DD-WRT !?
Is it compatible version of DD-WRT released ?
And whether it will be?
I bought a D-Link 600 B5E F / W Ver. 2.10 I read somewhere that it is not compatible router with DD-WRT !?
Is it compatible version of DD-WRT released ?
And whether it will be?
Sorry for my bad English
Revision above B2 is currently not supported. They use a different Ralink chipset which is again, not supported. Support for chipset seems to be hard to come by. Might be a long wait , if it ever happens. My advice? Get another router.
Has anyone tried the 18687 build (ftp://dd-wrt.com/others/eko/BrainSlayer-V24-preSP2/2012/03-08-12-r18687/files/dlink-dir600b/) on the Dir-600 Rev Bx? I'm currently using the old 14896 build, but there the port forwarding is broken, which is a major nuisance. I really hope a new stable version will be out for the Dir-600 Rev Bx in a not too distant future, which has all basic features working.