Thanks, but before I ask You, I try use google.
Many links I found, but all of them doesn't give me any example or manual about connect hardware one and Linux server.
Only information about the connection between two hardware devices.
If you know - give me a direct link...
I have the same question, does anybody know is it possible to set up an EoIP tunnel from dd-wrt to Linux (Ubuntu) Server ?
Just tired of being looked for the answer in Google...
I have two router which can talk via many routers on the same network and I need to make a tunnel between the two. One of them is a ddwrt the other ubuntu linux. Both host can ping each other via the network.
DDWRT (10.10.15.3)
Tunnel1:
EoIP Tunnel: enabled
Remote IP Address: 192.168.25.3
Bridging: disabled
IP Address: 10.20.200.1
Subnet Mask: 255.255.255.0
Linux (192.168.25.3)
meoip.conf:
Quote:
[eoip0]
id=1
dst=10.10.15.3
Quote:
:/etc# meoip meoip.conf
Mikrotik EoIP 0.2
(c) Denys Fedoryshchenko <nuclearcat@nuclearcat.com>
Creating tunnel: eoip0 num 0
Destination for eoip0: 10.10.15.3
before using eoip i always prefer a vpn with openvpn...
Sure, but tplink 941 doesn't support it. Also it's slower due to encryption.
In my case the network is shared with another friendly company. We only want to tunnel my traffic from his traffic in the private bridge that bridge two locations.
but, the main point is that dd-wrt EoIP is not compatible with Mikrotik EoIP, and there is no documentation on how to link dd-wrt EoIP with linux.
[edit]
With two linux hosts I got a working tunnel with meoip.