Posted: Mon Feb 27, 2012 6:14 Post subject: Sitecom WL351 HW1.0 to ESR9850
Hello!
And so begin the transformation of Sitecom WL-351 in Engenius ESR9850.
1. Pull out the cord from the WAN port.
2. Flashing with file - ESR9850-APPS-V2-1-0-124_mod.dlf
Rebooting takes 3-4 minutes. After rebooting, we get - menu of a router ESR9850.If hang up - HW reset - off and on holding the WDS - 15 - 20 sec.
3. After that, flashing with file ESR9850-KNL-V2-0-1-114.dlf
4. We get is a normal ESR.
5. flashing with file - ESR9850-APPS-V1-1-0-86.dlf
After rebooting, we normally work ESR9850.
There is a moment - HW reset no longer works, it does take a solder button.
To return to the Sitecom - flashing with file- WL-351-APPS-V1-5-0-7mod.dlf.
But after a reboot - flashing file WL-351-KNL-V1-5-0-7.dlf
thanks for your effort! I've been waiting for a custom firmware for WL-351, since the stock firmware is kinda limited.
I have a few questions:
''HW reset no longer works, it does take a solder button. '' Does it mean you can't hardware reset WL351 after flasing with the reset button?
The upgrade process is from the firmware upgrade page on the default router page?
thanks for your effort! I've been waiting for a custom firmware for WL-351, since the stock firmware is kinda limited.
I have a few questions:
''HW reset no longer works, it does take a solder button. '' Does it mean you can't hardware reset WL351 after flasing with the reset button?
The upgrade process is from the firmware upgrade page on the default router page?
Yes, HW RESET not working via WPS button (It meaning - that don't forget your admin passowrd in router)
Yes, from Default router page.
so .. it seems it will have a ESR 9850 firmware then. Does this firmware has an Wake on LAN-feature on it, cuz the default sitecom firmware is really limited?
Have you tried dd wrt install on the sitecom wl 351?
No, because it N/A.
eddoussi wrote:
so .. it seems it will have a ESR 9850 firmware then. Does this firmware has an Wake on LAN-feature on it, cuz the default sitecom firmware is really limited?
No, because in this version of application this feature not released. But I need stable version with L2TP protocol on WAN, and I got it.
Because ESR9850-APPS-V2-1-0-124_mod.dlf - is modified for uploading to rewrite original WL351 firmware (WL351 check is the Sitecom firmware).
only with ESR9850-APPS-V1-1-0-86.dlf I have stable version and all features works (on higher version, when I plug WAN, WL351 works 3-5 min and reboots).
