gtabomber DD-WRT Novice
Joined: 13 Mar 2012 Posts: 2
|
Posted: Tue Mar 13, 2012 4:20 Post subject: Un-brick a WG302 |
|
Need a little bit of help here.
WG302v1.
I did have openwrt loaded. It was a bit buggy, i did some stuff, now it wont boot. Ive tried re-installing/flashing openwrt and the original netgear software. No joy.
Code: |
== Executing boot script in 2.000 seconds - enter ^C to abort
RedBoot> fis load -b 0x01600000 kernel
No image 'kernel' found
RedBoot> exec 0x01600000
Base address unknown - use "-b" option
RedBoot>
|
Code: | RedBoot(tm) bootstrap and debug environment [ROM]
Red Hat certified release, version 1.92 - built 10:44:29, Apr 9 2004
Platform: IXDP425 Development Platform (XScale)
Copyright (C) 2000, 2001, 2002, Red Hat, Inc.
RAM: 0x00000000-0x10000000, 0x0001f9b8-0x0ffd1000 available
FLASH: 0x50000000 - 0x50800000, 64 blocks of 0x00020000 bytes each.
Bootcode Version 1.9 2004/04/08
== Executing boot script in 2.000 seconds - enter ^C to abort
^C
RedBoot> ^C
RedBoot> fis init -f
About to initialize [format] FLASH image system - continue (y/n)? y
*** Initialize FLASH Image System
... Erase from 0x50060000-0x507c0000: Err = a2
initialization failed 0x50060000: Error trying to erase
... Erase from 0x507e0000-0x507e0000:
... Erase from 0x50800000-0x50800000:
... Unlock from 0x507e0000-0x50800000: .
... Erase from 0x507e0000-0x50800000: .
... Program from 0x0ffdf000-0x0ffff000 at 0x507e0000: .
... Lock from 0x507e0000-0x50800000: .
RedBoot>
|
Code: | RedBoot> fis list
Name FLASH addr Mem addr Length Entry point
RedBoot 0x50000000 0x50000000 0x00060000 0x00000000
RedBoot config 0x507C0000 0x507C0000 0x00001000 0x00000000
Config backup 0x507C1000 0x507C1000 0x00001000 0x00000000
FIS directory 0x507E0000 0x507E0000 0x00020000 0x00000000
|
Code: |
RedBoot> load -r -b %{FREEMEMLO} openwrt-wg302v1-zImage
Using default protocol (TFTP)
Raw file loaded 0x0001fc00-0x000f525f, assumed entry at 0x0001fc00
RedBoot> fis create kernel
Can't locate e0000(917504) bytes free in FLASH
RedBoot> load -r -b %{FREEMEMLO} openwrt-ixp4xx-generic-squashfs.img
Using default protocol (TFTP)
Raw file loaded 0x0001fc00-0x001dfbff, assumed entry at 0x0001fc00
RedBoot> fis create -r 0x0001fc00 -l 0x620000 rootfs
Can't locate 620000(6422528) bytes free in FLASH
RedBoot>
|
Here is an attempt to get the netgear firmware back on by holding the reset button
Code: | --------------------------------------------------------------------------------
Checksum of firmware is correct!------------------------------------------------
Raw file loaded 0x01600000-0x019d3007, assumed entry at 0x01600000--------------
*** Initialize FLASH Image System-----------------------------------------------
... Erase from 0x50060000-0x507c0000: Err = a2----------------------------------
--------------------------------------------------------------------------------
initialization failed 0x50060000: Error trying to erase----------------------
... Erase from 0x507e0000-0x507e0000: ------------------------------------------
... Erase from 0x50800000-0x50800000: ------------------------------------------
... Unlock from 0x507e0000-0x50800000: .----------------------------------------
... Erase from 0x507e0000-0x50800000: .-----------------------------------------
... Program from 0x0ffdf000-0x0ffff000 at 0x507e0000: .-------------------------
... Lock from 0x507e0000-0x50800000: .------------------------------------------
Flash can't be initialized! Error 3---------------------------------------------
== Executing boot script in 2.000 seconds - enter ^C to abort-------------------
RedBoot> fis load -b 0x01600000 kernel------------------------------------------
No image 'kernel' found---------------------------------------------------------
RedBoot> exec 0x01600000--------------------------------------------------------
Using base address 0x01600000 and length 0x003d3008-----------------------------
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
-
|
any help, greatly appreciated! |
|