Joined: 06 Jun 2006 Posts: 6192 Location: Dresden, Germany
Posted: Sat Jul 23, 2011 13:52 Post subject: Re: configurar dd-wrt para antena wifi
BrainSlayer quisiera saber como debo configurar el dd-wrt std ( 14896) en router linksys wrt160nl para conectarle una antena hechiza ( antena wifi jolly rogers)la hice
con el proposito de acceder a internet de forma gratuitamente a travez de esta antena
como debo hacerlo ,configurarlo etc
sorry. i do not speak spanish _________________ one cigarette costs 2 minutes of your life.
one bottle of beer costs 4 minutes of your life.
one working day costs 8 hours of your life.
DD-WRT supported Concerts @ Bunker Dresden
03.10.2014 - Front 242 / Haujobb / Planet Myer Day
here the test images + initial installation instructions
i have tried you bin and install.txt instructions. Flashing proccess goes well, but after:
1) I see only SSID "ddwrt"
2) I can connect with client to Unifi with ddwrt firmware and SSID "ddwrt", but doesnt work correctly. For example my phone get from dhcp server correct gateway (and internet work fine) but laptop get wrong gateway. If i connect not via Unifi laptop it gets correct GW.
3) The biggest problem is that i cant find any IP addrees which should Unifi use (before flashing i setup static 192.168.1.20, which work fine till flashed) so i cant connect to unifi and manage anything. Neither via http nor ssh. Also ping doesnt work.
4) AP Unifi keep flashing green light, i am not sure if it is some kind of status warning.
i am stupid and you should write better instructions!
At first you should specify that after flashing ddwrt firmware IP address of Unifi AP is set to 192.168.1.1 and also there is activated DHCP server by default. In my case the IP colidate with our server and also dhcp server.
I was also very surprised that this ddwrt is only 24h trial. If i know before it that this version is paid i will probably not lost time with try. 24h for some testing isnt much if you try it in the Friday afternoon before the weekend
I swear I read lot of artickles and guides here. If you think i have not read the right one please point me else please dont criticize me.
-I have tried ssh and telnet into the ddwrt without luck. SSH/telnet daemon was enabled and also managment via SSH/telnet was enabled via WebGUI. Maybe you disable this option in non activated FW?
-Also i have tried several fw versions 18687, 18024, 18007, 18000, 17967 because i have found artickle with informations that some version has not working ssh/telnet. After flashing 17967 i bricked my UNIFI, i cant ping anymore and LED doesnt light, just flash a while(orange) every ~1 minute.
-i cant get to recovery mode because uploading via TFTP doesnt succeedded
-the last solution i have found is get SERIAL to TTL converter, but i cant find this anywhere in my country
So i am very disapointed. I wait so long for any response from your team and the result is that i have bricked Unifi.