BUILD BS - 18767

Post new topic   Reply to topic    DD-WRT Forum Forum Index -> Broadcom SoC based Hardware
Author Message
kt_haddock
DD-WRT Guru


Joined: 25 Dec 2009
Posts: 625

PostPosted: Sun Mar 18, 2012 14:08    Post subject: BUILD BS - 18767 Reply with quote
ftp://dd-wrt.com/others/eko/BrainSlayer-V24-preSP2/2012/03-08-12-r18767/

Murrkf wrote:
My standard comments:

This build thread is for reporting successes and problem with loading this experimental test build. This is important info for developers and users. Always state your hardware and SPECIFIC build. (eg: 18767_NEWD-2_K2.6_mega-nv64k.bin).Do not ask questions about your specific router or how to configure it in this thread; create your own thread to discuss any specific problems you have or need resolved. This thread is to report info, not to seek it. Posts that do not add to understanding this build will be deleted. Make sure you know how to flash properly and the risk before using this build. It is important to adhere to these requirements, to keep this thread from becoming impossibly long and useless. If you don't know what build to flash and how to flash properly and have a means of recovery if things should go wrong, do NOT flash this experimental test build.

_________________
[I prefer answere in whole sentence]
Sponsor
crashfly
DD-WRT Guru


Joined: 24 Feb 2009
Posts: 2024
Location: Sol System > Earth > USA > Arkansas

PostPosted: Sun Mar 18, 2012 16:47    Post subject: Reply with quote
Well ... there still seems to be an issue with the router giving out a WAN IP address to an internal computer at bootup. Otherwise, seems to be an ok build. If any problems come up, I will report them here.
_________________
E3000 22200M KongVPN K26
WRT600n v1.1 refirb mega 18767 BS K24 NEWD2 [not used]
WRT54G v2 16214 BS K24 [access point]

Try Dropbox for syncing files - get 2.5gb online for free by signing up.

Read! Peacock thread
*PLEASE* upgrade PAST v24SP1 or no support.
Murrkf
DD-WRT Guru


Joined: 22 Sep 2008
Posts: 11215

PostPosted: Sun Mar 18, 2012 17:25    Post subject: Reply with quote
I have installed the generic k24 vpn build on my wrt310n v1. It seems to be working properly overall at least in a general way. However, LZO compression will revert to disabled when I set it to yes. (Appears to be related to changeset 19741)
_________________
SIG:
I'm trying to teach you to fish, not give you a fish. If you just want a fish, wait for a fisherman who hands them out. I'm more of a fishing instructor. So See this:
http://i31.tinypic.com/24mz3ms.png

LOM: "If you show that you have not bothered to read the forum announcements or to follow the advices in them then the level of help available for you will drop substantially, also known as Murrkf's law.."
barryware
DD-WRT Guru


Joined: 26 Jan 2008
Posts: 12835
Location: Behind The Reset Button

PostPosted: Sun Mar 18, 2012 18:09    Post subject: Reply with quote
flashed std_usb_nas to my RT-N16.. It showed the same radio behavior I reported in the 18740 thread..

After playing with the radio settings.. All I did was change from channel 10, to 11 and the problem was resolved.

This is strange.. I flash the k24_std_nokiad build to the TM and the radio had no issue. Whatever router I am using as my main router, always has the same setup (radio always uses channel 10)

Doing a site survey, there were no ap's in the neighborhood near channel 10 or 11.

Forever, I have always use channel 10 on the radio.. I have no explaination why changing from 10 to 11 fixed it.

Possibly a neighboring ap with a hidden ssid?

anyway.. so far.. so good on the rt which is in service as my main router / gateway / dhcp server. The tm just has the same problem reporting free space on the sd card. I believe this may have been broken when nvram status was added to the gui.

_________________
[Moderator Deleted] Shocked
netrixtardis
DD-WRT Novice


Joined: 21 Sep 2010
Posts: 2
Location: San Antonio, TX

PostPosted: Sun Mar 18, 2012 19:08    Post subject: Re: BUILD BS - 18767 Reply with quote
kt_haddock wrote:
ftp://dd-wrt.com/others/eko/BrainSlayer-V24-preSP2/2012/03-08-12-r18767/


k24 broadcom build _nokaid_generic is broken. Fails to flash (attempted from previous version, and attempted as a fresh flash - reset all) will show "upgrade failed".

_________________
Gateway -- WRT54GL v1.1 - DD-WRT v24-sp2 (12/08/11) std-nokaid-nohot-nostore
(SVN revision 17990M NEWD Eko)

WRT54G v2.2 - DD-WRT v24-sp2 (03/18/12) std
(SVN revision 18767)
okaegi
DD-WRT Novice


Joined: 18 Mar 2012
Posts: 45

PostPosted: Sun Mar 18, 2012 19:37    Post subject: Reply with quote
WNDR3300 (dd_wrt.v24_mini_generic18767.bin) update with webflash okay
WNDR4000 (dd_wrt.v24.18767_NEWD-2_K2.6_big_nv64k.bin) update with webflash okay
jrscs
DD-WRT User


Joined: 09 Aug 2010
Posts: 97

PostPosted: Sun Mar 18, 2012 20:54    Post subject: Reply with quote
Upgraded (dd-wrt.v24-18024_NEWD-2_K2.6_big-nv60k.bin) to (dd-wrt.v24-18767_NEWD-2_K2.6_big-nv60k.bin)

e4200 - primary router/gateway
2.4Ghz (GN) with 20Mhz channel width did not see the drop in speed like what occurred in 18740 – seems OK
5Ghz (N) with 40Mhz channel width seems OK
SSH fixed
Under JFSS2 Support JFSS2 displays - Total / Free Size 8,448.00 KB / -
Under Sys-Info JFSS2 displays JFFS2 - 324.00 KB / 8,448.00 KB
Nocat does not work

Upgraded (dd-wrt.v24-18740_NEWD-2_K2.6_big-nv60k.bin) to (dd-wrt.v24-18767_NEWD-2_K2.6_big-nv60k.bin)

e2000 - hard wired from e4200
WDS to e3000 using 5Ghz (N) with 40Mhz channel width
Seems OK

e3000 - WDS on 5 Ghz (N) with 40Mhz channel width
2.4 (GN) with 20Mhz channel width
Seems OK

_________________
Asus ac68r - DD-WRT v24-K3_AC_ARM_STD_OLDD (06/13/14) kongac - build 24345
Asus ac66u - DD-WRT v24-K3_AC_OLDD (06/07/14) kongac - build 24200
Repeater Bridge(s)
Linksys e4200 rm - DD-WRT v24 (4/18/14) NEWD-2_K3.x_mega - build 23919
Linksys e2000 v1 - DD-WRT v24-sp2 (4/18/14) NEWD-2_K3.x_mega - build 23919
Linksys WRT610N v2 >> e3000 - DD-WRT v24 (4/18/14) NEWD-2_K3.x_mega - build 23919
barryware
DD-WRT Guru


Joined: 26 Jan 2008
Posts: 12835
Location: Behind The Reset Button

PostPosted: Mon Mar 19, 2012 12:42    Post subject: Reply with quote
barryware wrote:
flashed std_usb_nas to my RT-N16.. It showed the same radio behavior I reported in the 18740 thread..

After playing with the radio settings.. All I did was change from channel 10, to 11 and the problem was resolved.

This is strange.. I flash the k24_std_nokiad build to the TM and the radio had no issue. Whatever router I am using as my main router, always has the same setup (radio always uses channel 10)

Doing a site survey, there were no ap's in the neighborhood near channel 10 or 11.

Forever, I have always use channel 10 on the radio.. I have no explanation why changing from 10 to 11 fixed it.

Possibly a neighboring ap with a hidden ssid?

anyway.. so far.. so good on the rt which is in service as my main router / gateway / dhcp server. The tm just has the same problem reporting free space on the sd card. I believe this may have been broken when nvram status was added to the gui.


I spoke too soon.. after a couple of hours, the radio on the rt went back to 2mbs and all connected clients are (were) completely unusable.

I put the tm back which is running this k24 build and older radio drivers and does not have this problem.

I am certain... or at least pretty sure it is not my environment.. Playing with channels & beacon, any save to the radio parameters bring the reported link speed right back up. Any where from a couple of minutes to an hour or so, the radio slows back down to 2mbs.

_________________
[Moderator Deleted] Shocked
stalonge
DD-WRT Guru


Joined: 21 Jul 2006
Posts: 1280
Location: Fortaleza Ce Brazil

PostPosted: Mon Mar 19, 2012 18:39    Post subject: Reply with quote
Your are not alone , BW

My E3000 after 20 minuts , slow down to 2 mb

back to Kong 18050


Very Happy Very Happy

_________________
DDwrt ...it rocks ....

1 WZR1750 24800 kongac
1 DDx86 VMware 23919
1 E3000 22000+ Kong 4G Squid
1 E3200 24118 4G
1 WRT610Nv2 22000+ Kong
1 WHR G125 Voip 15962
1 WRT150N 23838
1 WHR HP 54 like Repeater Bridge 15962
Display posts from previous:    Page 1 of 1
Post new topic   Reply to topic    DD-WRT Forum Forum Index -> Broadcom SoC based Hardware All times are GMT

Navigation

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You can attach files in this forum
You can download files in this forum