Posted: Tue Apr 03, 2012 21:08 Post subject: Probleme mit ttyUSB0 bei FTDI Converter
Hi,
ich versuche einen FTDI Chip an einem Belkin Play, alias F7D4302 zum laufen zu bekommen. Es das DD-WRT v24-sp2 (12/08/11) big - build 17990M NEWD-2 K2.6 Eko drauf.
mit
Code:
insmod usbserial.ko
insmod ftdi_sio.ko
bekomme ich mit dmesg
Code:
usbcore: registered new interface driver usbserial
drivers/usb/serial/usb-serial.c: USB Serial Driver core
drivers/usb/serial/usb-serial.c: USB Serial support registered for FTDI USB Serial Device
usbcore: registered new interface driver ftdi_sio
drivers/usb/serial/ftdi_sio.c: v1.4.3:USB FTDI Serial Converters Driver
usb 1-1.4: new full speed USB device using ehci_hcd and address 4
usb 1-1.4: configuration #1 chosen from 1 choice
ftdi_sio 1-1.4:1.0: FTDI USB Serial Device converter detected
drivers/usb/serial/ftdi_sio.c: Detected FT232RL
usb 1-1.4: FTDI USB Serial Device converter now attached to ttyUSB0
jedoch erhalte ich kein /dev/ttyUSB0 und alle "anderen" lassen sich nicht ansprechen
I have another NAS, a Conceptronic CH3MNAS, but exactly the same problem: Compiled the two kernel modules, insmodded them, plugged the serial device (a FT232) and dmesg tells me that my device has been connected to ttyUSB0 - but the device will not show up in /dev and therefore remains unaccessible.
Something that makes me wonder is that ftdi_sio.ko is "not used by anything", well, at least if you can trust the output of lsmod.
Now that some time went by: Did you manage to solve this issue? Any hints are thankfully appreciated ...