e1200 & dd-wrt?

Post new topic   Reply to topic    DD-WRT Forum Forum Index -> Broadcom SoC based Hardware
Author Message
RJHopper
DD-WRT Novice


Joined: 12 Feb 2012
Posts: 2

PostPosted: Sun Feb 12, 2012 0:55    Post subject: e1200 & dd-wrt? Reply with quote
Hi all, was wondering if anyone can tell me if the dd-wrt software has been made to work on a cisco e1200 AP?
I have 2 of these and was looking to load them with the dd-wrt.
If not, can I use the e1000 v.2 load for the e1200?
Thx
RJ
Sponsor
buddee
DD-WRT Guru


Joined: 06 Feb 2010
Posts: 7386
Location: Little Rock

PostPosted: Sun Feb 12, 2012 17:09    Post subject: Re: e1200 & dd-wrt? Reply with quote
RJHopper wrote:
Hi all, was wondering if anyone can tell me if the dd-wrt software has been made to work on a cisco e1200 AP?
I have 2 of these and was looking to load them with the dd-wrt.
If not, can I use the e1000 v.2 load for the e1200?
Thx
RJ


Cisco E1200 is not dd-wrt supported, and for your second question - I am not sure what you mean by that.. but i am going to guess that you mean can you use the dd-wrt image for the e1000 v2 and flash it on the e1200? answer is no.

_________________
Wireless N Config | Linking Routers | DD-WRT Wiki | DD-WRT Builds | Peacock - Broadcom FAQ

Having problems with port forwarding? Check out Port Forward Troubleshooting for more info.
RJHopper
DD-WRT Novice


Joined: 12 Feb 2012
Posts: 2

PostPosted: Sun Feb 12, 2012 20:47    Post subject: Reply with quote
Thx, I appreciate that!!! who do I contact to see if they can do an image for the e1200? Or if I need to donate a router for the project?
Thx for your time!!!
buddee
DD-WRT Guru


Joined: 06 Feb 2010
Posts: 7386
Location: Little Rock

PostPosted: Sun Feb 12, 2012 22:06    Post subject: Reply with quote
Do this: http://www.dd-wrt.com/site/support/router-detection
_________________
Wireless N Config | Linking Routers | DD-WRT Wiki | DD-WRT Builds | Peacock - Broadcom FAQ

Having problems with port forwarding? Check out Port Forward Troubleshooting for more info.
tim.wochomurka
DD-WRT Novice


Joined: 16 Feb 2012
Posts: 2

PostPosted: Thu Feb 16, 2012 2:44    Post subject: Reply with quote
I can't see why the E1200 wouldn't be supported, considering the amount of flash, ram, and the BCM5357...

https://fjallfoss.fcc.gov/oetcf/eas/reports/ViewExhibitReport.cfm?mode=Exhibits&RequestTimeout=500&calledFromFrame=N&application_id=721009&fcc_id='Q87-E1200'
buddee
DD-WRT Guru


Joined: 06 Feb 2010
Posts: 7386
Location: Little Rock

PostPosted: Thu Feb 16, 2012 11:55    Post subject: Reply with quote
tim.wochomurka wrote:
I can't see why the E1200 wouldn't be supported, considering the amount of flash, ram, and the BCM5357...

https://fjallfoss.fcc.gov/oetcf/eas/reports/ViewExhibitReport.cfm?mode=Exhibits&RequestTimeout=500&calledFromFrame=N&application_id=721009&fcc_id='Q87-E1200'


I know you can't see why it wouldn't be supported, but without the info provided in the link i posted, and yes that means more than just an FCC id, than support will be very slow at best, if you can provide the info in the link i posted, and/or a donated unit for the port, then it could possibly be supported alot faster.

_________________
Wireless N Config | Linking Routers | DD-WRT Wiki | DD-WRT Builds | Peacock - Broadcom FAQ

Having problems with port forwarding? Check out Port Forward Troubleshooting for more info.
tim.wochomurka
DD-WRT Novice


Joined: 16 Feb 2012
Posts: 2

PostPosted: Fri Feb 17, 2012 2:28    Post subject: Reply with quote
Oh, I read through the link you posted, and am currently waiting for some small parts to build a JTAG cable. Sadly, I can't afford to donate a unit, but I can afford to void a warrantee or two. I was simply stating, barring anything new I find when dumping the CFE, that the e1200 probably has the ability to run DD-WRT, however, after some more digging, I'm worried cisco may have removed some code/commands in current hardware. I'll report back when I get a jtag cable made (as well as the console cables for my stack o' catalysts)
zgoldberg
DD-WRT Novice


Joined: 08 Dec 2011
Posts: 3

PostPosted: Thu Mar 22, 2012 22:05    Post subject: Reply with quote
Somehow I've managed to get myself a couple of these (E1200s). Happy to ship/donate them to devs if that'll speed up DD-WRT support!
Fractal
DD-WRT Guru


Joined: 19 Apr 2010
Posts: 1189

PostPosted: Sat Mar 24, 2012 8:24    Post subject: Reply with quote
zgoldberg wrote:
Somehow I've managed to get myself a couple of these (E1200s). Happy to ship/donate them to devs if that'll speed up DD-WRT support!


You also have to take note that there is version 1 and version 2 of this router.. I am working on finalizing the N66U, and E2500 5ghz driver then I am going to work on the E1500, then if interest is still there for the E1200 I will see what I can do.

-Fractal
wheman
DD-WRT Novice


Joined: 07 Apr 2012
Posts: 2

PostPosted: Sat Apr 07, 2012 4:08    Post subject: Reply with quote
Yes please, we have a lot of interest on E1200. Don't laugh but this is the only router we can get here Sad

Thanks for your time
Fractal
DD-WRT Guru


Joined: 19 Apr 2010
Posts: 1189

PostPosted: Sun Apr 08, 2012 23:56    Post subject: Reply with quote
wheman wrote:
Yes please, we have a lot of interest on E1200. Don't laugh but this is the only router we can get here Sad

Thanks for your time


The E1200 has been ported, both version 1 and version 2.

http://www.dd-wrt.com/phpBB2/viewtopic.php?t=153302
wheman
DD-WRT Novice


Joined: 07 Apr 2012
Posts: 2

PostPosted: Fri Apr 13, 2012 22:42    Post subject: Reply with quote
Fractal wrote:
The E1200 has been ported, both version 1 and version 2.

http://www.dd-wrt.com/phpBB2/viewtopic.php?t=153302

+1 to your hard work Fractal. Thank you very much Smile
Sos groso, sabelo!
Point_Tech
DD-WRT Novice


Joined: 10 May 2012
Posts: 1
Location: Scottsdale, AZ

PostPosted: Thu May 10, 2012 4:26    Post subject: E1200 Installed and up and running without a hitch Reply with quote
I am definitely going to knock on wood, but I wanted to thank everyone that pushed this through and got it done so quickly. These inexpensive units are perfectly suited for my needs.

FYI, the from factory to DD-WRT went without any problem at all, and to temper my instant gratification desires, I even set a timer to make sure to give them a full 10 minutes before power cycling them and taking a look.

I am using WDS in a mesh-like setting and equipment and software is cooperating as it should.

I have to say that this was the smoothest and easiest DD-WRT flash that I have ever done - by far - by millenia!

Thanks guys. Keep up the good work and I hope that I am able to contribute somehow in the future as I learn my way.

Thank you Fractal and Brainslayer

Point

_________________
--
D-Link DIR-825 B1 R18777 Std
Linksys WRT54GS V7 R18777 Micro
Cisco E1200 V1 V24-18946 Mini
Cisco E1200 V1 V24-18946 Mini
Cisco E1550 V24-18946 Mini
AirLink 101 AR430W WIP

zapp22
DD-WRT Novice


Joined: 01 Apr 2009
Posts: 33
Location: texas

PostPosted: Mon May 14, 2012 20:28    Post subject: great news re: e1200 Reply with quote
thanks to the guys that made the E1200 build happen
_________________
Zapp
scottinthesouth
DD-WRT Novice


Joined: 27 Jan 2013
Posts: 3

PostPosted: Sun Jan 27, 2013 16:16    Post subject: E1200 load balancing scripts Reply with quote
Yes, thanks for getting hte E1200 working. I have 3 of them. Two are acting as repeaters picking up mifi signals and I am trying to turn the third into a dual wan load balancer.

I have it configured to have the default Lan on vlan2 and port 4 of the ethernet ports configured as a second WAN port on vlan3.

I can turn on or off either connection and the internet still runs through one or the other connections.

But, I can't seem to get the scripts to work to load balance across the two. Any suggestions?
Display posts from previous:    Page 1 of 1
Post new topic   Reply to topic    DD-WRT Forum Forum Index -> Broadcom SoC based Hardware All times are GMT

Navigation

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You can attach files in this forum
You can download files in this forum