Posted: Mon Apr 09, 2012 1:59 Post subject: ?Kingkong + OTRW, Asus N16 = partially working
Hi all,
New to the world of tinkering under the hood with these things, love it so far.
A bit stuck though: Using KingKong 18730M and trying to use optware. Tried to add some #!sh and other lines to the code, not luck. Tried the script, no luck.
Error I get: /usr/sbin/wl:-i eth2 interference 3 -> wl driver adapter not found. Searching the web/forums not helping clear this up. Is it likely simple, pls steer me in the direction of the fix.
Posted: Mon Apr 09, 2012 5:21 Post subject: Re: ?Kingkong + OTRW, Asus N16 = partially working
On which router?
Try the script in my previous post that will fix the #!/bin/sh
fisheater wrote:
Hi all,
New to the world of tinkering under the hood with these things, love it so far.
A bit stuck though: Using KingKong 18730M and trying to use optware. Tried to add some #!sh and other lines to the code, not luck. Tried the script, no luck.
Error I get: /usr/sbin/wl:-i eth2 interference 3 -> wl driver adapter not found. Searching the web/forums not helping clear this up. Is it likely simple, pls steer me in the direction of the fix.
Thanks for your suggestions, I am using the Asus N16 and did run your script via putty, it updated some files, did not others, then at the end noted that fixing the errors.
I will try and reformat the USB key, then run your script again.
After updating these files, i can not access through wan to ftp site. Would there be anything in there that would cause this?.
thanks.
Which way do you mean?
Do you run a ftp server on your router or locally on your lan.
Or are you trying to access a ftp somewhere on the web.
basmaf,,
I am currently running proftpd as a standalone server on my router, i can access via lan but now I can't run it remotely via WAN. I have a WRT610nv2 18024 BS big build
After updating these files, i can not access through wan to ftp site. Would there be anything in there that would cause this?.
thanks.
Which way do you mean?
Do you run a ftp server on your router or locally on your lan.
Or are you trying to access a ftp somewhere on the web.
basmaf,,
No sorry, it is working now, like it did before, i had to disable the fixtables service and it works again, whenever the fixtable service is active it hammers all ip address that try to access my ftp site. I could not find a solution to fix this.
Then tried to start asiablock and got the same error messages as before
***
Optware and basic packages are installed.
Checking Optware Scripts for bugs....
BUG - shebang is missing in /opt/etc/init.d/S95asiablock changed the file
BUG - shebang is missing in /opt/etc/init.d/S95birmablock changed the file
BUG - shebang is missing in /opt/etc/init.d/S95worldblock changed the file
BUG - shebang is missing in /opt/etc/init.d/S80pound changed the file
BUG - /opt/lib/libpcre.so.0 is missing creating a symlink
service asiablock on
service asiablock start
(loads rules)
S95asiablock: Restart firewall
/bin/sh: can't open 'echo -e # bof'
/usr/sbin/wl:-i eth2 interference 3 ->wl driver adapter not found
/usr/sbin/wl:-i eth2 interference 3 ->wl driver adapter not found
/usr/sbin/wl:-i eth2 interference 3 ->wl driver adapter not found
/usr/sbin/wl:-i eth2 interference 3 ->wl driver adapter not found
***
And with one new one
***
/bin/sh: can't open 'echo -e # bof'
***
Suggestions?
To address your first question, 'Do you have the wl interference level set in your firewall scipt? it should be in startup.' I admit I am not sure what that means. The only firewall addition I have done is under Administration->Commands:
#i added this from another forum post
wanf=`nvram get wan_iface`
iptables -I INPUT 2 -i $wanf -p tcp -j asia
iptables -I FORWARD 1 -i $wanf -p tcp --dport 20:1024 -j asia
The output of grep is different from yours, I have not altered any of the files installed from your script:
No sorry, it is working now, like it did before, i had to disable the fixtables service and it works again, whenever the fixtable service is active it hammers all ip address that try to access my ftp site. I could not find a solution to fix this.
The output of grep is different from yours, I have not altered any of the files installed from your script:
I made a mistake in the order of fixing bugs in the prep script... will update the script later.
For fixing your problem.
Files need to be created again
Remove files created by asia and run the prep script again
Code:
service asiablock stop
rm /opt/etc/iptables.asia*
wget -O /tmp/prep_optware http://www.dd-wrt.com/phpBB2/download.php?id=22258
sh /tmp/prep_optware
service asiablock start
That will indeed work, but that is not what i am trying to achieve.
I'm trying to modify the prep script in such way that every can use just it to update or install optware,
Without the need to hack crack copy paste in original scripts as it was in the past when frater kept his scripts up to date.
Everybody who uses OTRW on recent builds will have issues and is required to modify scripts and in some cases create symlinks.
Which makes OTRW unusable for the less experienced users
Since I got no response from frater concerning updating his scripts.
I don't see any other options...
Please don't misunderstand me I'm trying to bring OTRW back to life
Joined: 24 Feb 2009 Posts: 2026 Location: Sol System > Earth > USA > Arkansas
Posted: Thu Apr 12, 2012 23:22 Post subject:
basmaf wrote:
Since I got no response from frater concerning updating his scripts.
I don't see any other options...
Please don't misunderstand me I'm trying to bring OTRW back to life
basmaf..
With that being said, maybe whole setup should be hosted elsewhere? I do not want to "rip off" frater's hard work, but if he has chosen to abandon this project, maybe it needs to be moved? _________________ E3000 22200M KongVPN K26
WRT600n v1.1 refirb mega 18767 BS K24 NEWD2 [not used]
WRT54G v2 16214 BS K24 [access point]
Try Dropbox for syncing files - get 2.5gb online for free by signing up.
Read! Peacock thread
*PLEASE* upgrade PAST v24SP1 or no support.