I have discovered the problem, the RS232-TTL chip from maxim nedded 5v and I give it 3.3v that was available on the PCB, I even try to fed it with USB 5v but with no results.
Now I use the smd version of the max chip and do work fine from 3.3v to 5v.
Now I was able to see the Boot log:
Quote:
U-Boot 1.1.4 (Feb 14 2011 - 14:28:31)
AP93 (ar7240) U-boot
DRAM:
sri
#### TAP VALUE 1 = 7, 2 = 8
32 MB
id read 0x100000ff
flash size 4194304, sector count = 64
Flash: 4 MB
Using default environment
In: serial
Out: serial
Err: serial
Net: ag7240_enet_initialize...
No valid address in Flash. Using fixed address
: cfg1 0xf cfg2 0x7014
eth0: 00:03:7f:09:0b:ad
eth0 up
No valid address in Flash. Using fixed address
: cfg1 0xf cfg2 0x7214
eth1: 00:03:7f:09:0b:ad
ATHRS26: resetting s26
ATHRS26: s26 reset done
eth1 up
eth0, eth1
Autobooting in 1 seconds
## Booting image at 9f020000 ...
Uncompressing Kernel Image ... OK
Starting kernel ...
Booting AR7240(Python)...<0>
Linux version 2.6.15--LSDK-7.3.0.300 gcc version 3.4.4 #1 Mon Feb 14 14:32:06 CST 2011
flash_size passed from bootloader = 4
CPU revision is: 00019374
Determined physical RAM map:
memory: 02000000 @ 00000000 (usable)
User-defined physical RAM map:
memory: 02000000 @ 00000000 (usable)
Built 1 zonelists
Kernel command line: console=ttyS0,115200 root=/dev/mtdblock2 rootfstype=squashfs init=/sbin/init mtdparts=ar7100-nor0:128k(u-boot),1024k(kernel),2816k(rootfs),64k(config),64k(art) mem=32M
Primary instruction cache 64kB, physically tagged, 4-way, linesize 32 bytes.
Primary data cache 32kB, 4-way, linesize 32 bytes.
Synthesized TLB refill handler (20 instructions).
Synthesized TLB load handler fastpath (32 instructions).
Synthesized TLB store handler fastpath (32 instructions).
Synthesized TLB modify handler fastpath (31 instructions).
Cache parity protection disabled
PID hash table entries: 256 (order: 8, 4096 bytes)
Using 200.000 MHz high precision timer.
Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
Memory: 30548k/32768k available (1368k kernel code, 2204k reserved, 291k data, 128k init, 0k highmem)
Mount-cache hash table entries: 512
Checking for 'wait' instruction... available.
NET: Registered protocol family 16
Returning IRQ 48
AR7240 GPIOC major 0
squashfs: version 3.3 (2007/10/31) Phillip Lougher
squashfs: LZMA suppport for slax.org by jro
Initializing Cryptographic API
io scheduler noop registered
io scheduler deadline registered
Serial: 8250/16550 driver $Revision: #1 $ 1 ports, IRQ sharing disabled
serial8250.0: ttyS0 at MMIO 0x0 (irq = 19) is a 16550A
RAMDISK driver initialized: 1 RAM disks of 8192K size 1024 blocksize
PPP generic driver version 2.4.2
PPPoX init, max protocols:3
NET: Registered protocol family 24
pppox protocol 0 register. max:3
cmdlinepart partition parsing not available
Searching for RedBoot partition table
5 RedBoot partitions found on MTD device ar7240-nor0
Creating 5 MTD partitions on "ar7240-nor0":
0x00000000-0x00020000 : "boot"
0x00020000-0x00120000 : "kernel"
0x00120000-0x003e0000 : "rootfs"
0x003e0000-0x003f0000 : "config"
0x003f0000-0x00400000 : "art"
->Oops: flash id 0x10215 .
NET: Registered protocol family 2
IP route cache hash table entries: 512 (order: -1, 2048 bytes)
TCP established hash table entries: 2048 (order: 1, 8192 bytes)
TCP bind hash table entries: 2048 (order: 1, 8192 bytes)
TCP: Hash tables configured (established 2048 bind 2048)
TCP reno registered
TCP bic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com>
All bugs added by David S. Miller <davem@redhat.com>
VFS: Mounted root (squashfs filesystem) readonly.
Freeing unused kernel memory: 128k freed
init started: BusyBox v1.01 (2010.04.08-11:57+0000) multi-call binary
Algorithmics/MIPS FPU Emulator v1.5
ip_conntrack version 2.4 (256 buckets, 5120 max) - 244 bytes per conntrack
insmod: cannot open module `/lib/modules/2.6.15/kernel/ip_nat.ko': No such file or directory
insmod: cannot open module `/lib/modules/2.6.15/kernel/ipt_MASQUERADE.ko': No such file or directory
insmod: cannot open module `/lib/modules/2.6.15/kernel/ipt_conntrack.ko': No such file or directory
insmod: cannot open module `/lib/modules/2.6.15/kernel/ipt_iprange.ko': No such file or directory
insmod: cannot open module `/lib/modules/2.6.15/kernel/ipt_mac.ko': No such file or directory
insmod: cannot open module `/lib/modules/2.6.15/kernel/ipt_string.ko': No such file or directory
insmod: cannot open module `/lib/modules/2.6.15/kernel/iptable_nat.ko': No such file or directory
insmod: cannot open module `/lib/modules/2.6.15/kernel/ipt_time.ko': No such file or directory
insmod: cannot open module `/lib/modules/2.6.15/kernel/ipt_TRIGGER.ko': No such file or directory
insmod: cannot open module `/lib/modules/2.6.15/kernel/ip_conntrack_pptp.ko': No such file or directory
insmod: cannot open module `/lib/modules/2.6.15/kernel/ipt_TCPMSS.ko': No such file or directory
insmod: cannot open module `/lib/modules/2.6.15/kernel/ipt_multiurl.ko': No such file or directory
insmod: cannot open module `/lib/modules/2.6.15/kernel/ip_conntrack_h323.ko': No such file or directory
insmod: cannot open module `/lib/modules/2.6.15/kernel/ipt_MARK.ko': No such file or directory
insmod: cannot open module `/lib/modules/2.6.15/kernel/sch_htb.ko': No such file or directory
insmod: cannot open module `/lib/modules/2.6.15/kernel/sch_prio.ko': No such file or directory
insmod: cannot open module `/lib/modules/2.6.15/kernel/sch_sfq.ko': No such file or directory
insmod: cannot open module `/lib/modules/2.6.15/kernel/cls_basic.ko': No such file or directory
insmod: cannot open module `/lib/modules/2.6.15/kernel/cls_fw.ko': No such file or directory
insmod: cannot open module `/lib/modules/2.6.15/kernel/ts_kmp.ko': No such file or directory
insmod: cannot open module `/lib/modules/2.6.15/kernel/flashid.ko': No such file or directory
insmod: cannot open module `/lib/modules/2.6.15/kernel/harmony.ko': No such file or directory
Now flash open!
Now flash open!
sys_mode=3 mac:8106c000 ag7240_macs[0]:00000000 ag7240_macs[1]:8106c000
2
sys_mode=3 mac:80310000 ag7240_macs[0]:80310000 ag7240_macs[1]:8106c000
1
sys_mode 3 PHY4 auto-negotiation enable
Attention: PHY4 Class A setting in debug 5 register which is not described in DS
phy_setup ethUnit:0 phyUnit:4
Port 4, Neg Success
(none) mips #1 Mon Feb 14 14:32:06 CST 2011 (none)
(none) login: ATHRS26: resetting s26
ATHRS26: s26 reset done
sys_mode 3 PHY0 auto-negotiation enable
Attention: PHY 0 Class A setting in debug 5 register which is not described in DS
sys_mode 3 PHY1 auto-negotiation enable
Attention: PHY 1 Class A setting in debug 5 register which is not described in DS
sys_mode 3 PHY2 auto-negotiation enable
Attention: PHY 2 Class A setting in debug 5 register which is not described in DS
sys_mode 3 PHY3 auto-negotiation enable
Attention: PHY 3 Class A setting in debug 5 register which is not described in DS
phy_setup ethUnit:1 phyUnit:0
phy_setup ethUnit:1 phyUnit:1
phy_setup ethUnit:1 phyUnit:2
phy_setup ethUnit:1 phyUnit:3
Port 0, Neg Success
Port 1, Neg Success
Port 2, Neg Success
Port 3, Neg Success
device eth0 entered promiscuous mode
Now flash open!
phy_setup ethUnit:1 phyUnit:0
phy_setup ethUnit:1 phyUnit:1
phy_setup ethUnit:1 phyUnit:2
phy_setup ethUnit:1 phyUnit:3
Port 0, Neg Success
Port 1, Neg Success
Port 2, Neg Success
Port 3, Neg Success
ath_hal: module license 'Proprietary' taints kernel.
ath_hal: 0.9.17.1 (AR5416, DEBUG, REGOPS_FUNC, WRITE_EEPROM, 11D)
wlan: 0.8.4.2 (Atheros/multi-bss)
ath_rate_atheros: Copyright (c) 2001-2005 Atheros Communications, Inc, All Rights Reserved
ath_dev: Copyright (c) 2001-2007 Atheros Communications, Inc, All Rights Reserved
ath_pci: 0.9.4.5 (Atheros/multi-bss)
wifi0: Atheros 9280: mem=0x10000000, irq=48 hw_base=0xb0000000
wlan_me: Version 0.1
Copyright (c) 2008 Atheros Communications, Inc. All Rights Reserved
wlan: mac acl policy registered
Country ie is US
maxrate = 300000
Country ie is US
br0: port 1(eth0) entering disabled state
phy_setup ethUnit:1 phyUnit:0
phy_setup ethUnit:1 phyUnit:1
phy_setup ethUnit:1 phyUnit:2
phy_setup ethUnit:1 phyUnit:3
Port 0, Neg Success
Port 1, Neg Success
Port 2, Neg Success
Port 3, Neg Success
device ath0 entered promiscuous mode
br0: port 2(ath0) entering learning state
br0: topology change detected, propagating
br0: port 2(ath0) entering forwarding state
br0: port 2(ath0) entering disabled state
OPERMODE:5****
Country ie is US
br0: port 2(ath0) entering learning state
br0: topology change detected, propagating
br0: port 2(ath0) entering forwarding state
br0: port 2(ath0) entering disabled state
Country ie is US
br0: port 2(ath0) entering learning state
br0: topology change detected, propagating
br0: port 2(ath0) entering forwarding state
Posted: Sat Feb 25, 2012 20:07 Post subject: WA801ND
deejayq wrote:
yes, i am the one testing dd-wrt on tl-wa801nd (thanks to LOM for the firmware)
i am using it as client for another access point
setting it as "client bridge(routed)" or "client" didn't add ath0 to br0. trying to add later ath0 to br0 also didn't seem to do any good.
so i had to use "wds station" mode.
no other problems found so far.
offtopic
what is br0:0 and why does it have a 169.254.x.x address?
I just flashed all WA801ND APs one by one in my office with this firmware (file from this tread)
it works
the main advantage for me now is "keep alive" function, because all my APs were hanging at least one time every day on original firmware, even with the last version