Posted: Sun May 20, 2012 14:31 Post subject: Tagged Vlan über Wlan bridge
Hallo,
ich möchte 2 Standorte mittels einer Bridge (2x WRT54GL) und 2 managable Switch verbinden und mehrere VLAN's über diese Bridge weiterleiten. Bei beiden Standorten sind also mehrere Vlans (z.B. 1=privat, 2=public wifi, 3=voip) und möchte diesselben Zugriffe auf den zweiten Standort haben.
Das Problem ist, daß ich nicht die getaggten Packete (den Trunk Port) über die Bridge bringe.
Vielleicht kann mir jemand weiterhelfen.
danke im voraus.
roland
klar KANN der trunks, aber der switch hackt dat frame trotzdem ab, wenns ein fremdgerät anhängt. das musste im wrt konfigurieren, dammiter das tag wieder dranscharaubt. wie zuverflässig das über die GUI geht, keine Ahung.
Quote:
i'am not sure about WAP54G, but probably it dont'have switch and forward all tagged frames as well. WRT54G have 802.1Q vlan switch, and forwards only these tagged frames, what is it configured to do. In older versions with the adm6996 switch, we can completely turn off 802.1Q with adm6996.o module. Look at http://www.openwrt.org/forum/viewtopic.php?t=363 , then it will be forwarding all tagged packets from whatever vlans (i have tried up to vlan120).
For the newer versions of WRT's is not such module done, because different switch chip, and we can't turn vlan support completely off. But via nvram variables, we can program switch to forward vlan tagged frames (not untag them) for every port. For example forwarding a vlan5, looks like this:
nvram set vlan5ports="0* 1* 2* 3* 4* 5*"
to vlan5 belongs all ports and * makes all of them tagged, so we receive tagged frames via wireless, pass these to switch tagged port 5 and output these via tagged ports 0-4. I, myselt not tried this, but in theory it must work. In such way we can bypass up to vlan15. There is no way to bypass for example vlan40.
vor jahren musste ich auch mal tagged vlan frames forwarden, bzw tu´s immer noch. nach tagender verzweiflung ( ) fand ich dann obiges im openwrt forum, und schwupp: alles paletti. _________________ RT-N66U @ Build 25697M K3.10.63
TL-WR842ND v1 @ BS-build 23919 WDS AP
TL-WR841ND @ BS-build 23919 WDS Client
TL-WR841ND @ BS-build 23919 Client Bridge ( Routed )
Hallo,
also die Lan ports zu taggen funktioniert ja bereits. Habe es mit einem Switch noch probiert und es klappt.
Das einzige was nicht klappt ist die tags über wlan zu schicken. Wahrscheinlich muß ich dort eth0 taggen, oder?
grüsse
roland