Author
Message
lanbudget DD-WRT Novice Joined: 22 May 2012 Posts: 16
Posted: Tue May 22, 2012 16:52 Post subject: REQUEST: Support for Alcatel-Lucent RG200E-CA
I would like to request the programmers to add support for the model:
Alcatel-Lucent RG200E-CA
Specs are:
CPU: Broadcom BCM5358 500MHz (with VOIP and 802.11n)
RAM: Mira P3R12E4JFF 64MB
FLASH: MXIC MX25L12845EWI-10G 16MB
There is a webpage showing the teardown here: http://blog.ich8.com/post/1545
The NVRAM default values are attached, along with the default CFE (containing a Broadcom Miniweb at bootwait).
VIELEN DANK!!
Description:
Default CFE for RF200E-CA
Download
Filename:
cfe_RG200E-CA.bin
Filesize:
128 KB
Downloaded:
652 Time(s)
Description:
Default NVRAM values for RG200E-CA
Download
Filename:
Default_NVRAM_RG200E-CA.txt
Filesize:
1.59 KB
Downloaded:
794 Time(s)
Back to top
Sponsor
lanbudget DD-WRT Novice Joined: 22 May 2012 Posts: 16
Posted: Thu May 31, 2012 18:42 Post subject:
Anybody? I thought at first it would be a simple matter of adding the id defs in the source code and recompiling. But maybe it is not so simple, with the buttons for WPS, reset and LED indicators.
Back to top
MrFidget DD-WRT User Joined: 15 Jul 2010 Posts: 378
Posted: Fri Jun 01, 2012 0:35 Post subject:
If it was, we would all be doing it
Cheers
Chris
Back to top
lanbudget DD-WRT Novice Joined: 22 May 2012 Posts: 16
Posted: Fri Jun 01, 2012 17:36 Post subject:
Well yes, I imagine it's a little complicated. That's why I am requesting the programmers! They will be aware of the VLAN and GPIO settings and the ID registers.
Back to top
go_tnt DD-WRT Novice Joined: 03 Aug 2012 Posts: 1
Posted: Fri Aug 03, 2012 10:02 Post subject: Re: REQUEST: Support for Alcatel-Lucent RG200E-CA
lanbudget wrote: I would like to request the programmers to add support for the model:
Alcatel-Lucent RG200E-CA
Specs are:
CPU: Broadcom BCM5358 500MHz (with VOIP and 802.11n)
RAM: Mira P3R12E4JFF 64MB
FLASH: MXIC MX25L12845EWI-10G 16MB
There is a webpage showing the teardown here: http://blog.ich8.com/post/1545
The NVRAM default values are attached, along with the default CFE (containing a Broadcom Miniweb at bootwait).
VIELEN DANK!!
I have one of those too, you can use them input some codes, but real inconvience.
wish for some dd-wrt official support.
sorry for my poor english.
Back to top