Posted: Thu May 24, 2012 8:59 Post subject: Unable to connect Wireless Client Access with Linksys E2500
The firmware that the router db gives me does not work with wireless client access on my Cisco Linksys E2500 running DD-WRT v24-sp2 mini firmware. I have referenced the wiki thread at http://www.dd-wrt.com/wiki/index.php/Client_Bridged but unsuccessful. Does anyone know of another working firmware to use for this router?
Posted: Fri May 25, 2012 6:27 Post subject: Issue Solved
Thanks for the response. It was the build from the router database. I found a newer one in peacock (I believe page 9) which is on the "other downloads" page that had newer versions, and it worked fine.
Posted: Fri May 25, 2012 8:15 Post subject: Client Bridge working
Hey eversmantech, I did get a client bridge working, but it did take a bit of tinkering to get all of the settings lined up *just right*.
I don't remember all of the steps I went thought, but I do know I used that link you posted as my starting point. The biggest key for me was just making sure I had all of the wireless settings lined up exactly right.
Now if you are having bigger problems with connecting to the wireless port at all, I can't help you there, but if it's just trying to get the client bridge setup, I'd be happy to share my limited, but eventually successful, knowledge.