Posted: Tue May 29, 2012 19:59 Post subject: Buffalo WBMR-HP-G300H
Hello, I just brought a Buffalo-HP-G300H WBMR Germany and seems to come with Annex B. Navigating around the firm commented that changing the DD-WRT I changed Annex B by A and even M.
I installed the v24 build 18026 preSP2, but does not appear or do not see anything to choose the type of Annex.
Can anyone help me??
For me, the only thing I needed to change in the end was the Payload type to Bridged.
Also take note that the current build (18777) seems to disable the ethernet switch. I could only get my streaming media boxes to connect to my NAS by WLAN and not by LAN cable. I'm also still having a few other problems (ie UnPP and port forwarding doesn't seem to work properly but that might be due the startup and firewall scripts I'm using to connect to an HMA server via OpenVPN).
The router will use it in Spain with Movistar ADSL, the values of my ISP is PPPoE 8/32 and LLC / SNAP.
I put the type of Annex A, but does not connect. Attached is a catch.
The model is WBMR-HP-G300H-DE to Annex B.
You can load an official firmware version WBMR-HP-G300H-EU?
The router will use it in Spain with Movistar ADSL, the values of my ISP is PPPoE 8/32 and LLC / SNAP.
I put the type of Annex A, but does not connect. Attached is a catch.
The model is WBMR-HP-G300H-DE to Annex B.
You can load an official firmware version WBMR-HP-G300H-EU?
Thank you.
[/img]
try changing the payload type to "Bridged", as I mentioned in my post above.
sorry to go a bit off topic...but looking at those screens the UI is a bit different than the classic dd-wrt that i'm used to.
I was just wondering if the dd-wrt for the WBMR adsl router, has bandwidth monitor with graphs where you can monitor in real time the wan, lan and wlan?