Unrecognized Ethernet-Card Listings (PCI/PCIe/Onboard)

Post new topic   Reply to topic    DD-WRT Forum Forum Index -> X86 based Hardware
Goto page Previous  1, 2, 3, 4, 5, 6, 7, 8, 9  Next
Author Message
Sash
DD-WRT Guru


Joined: 20 Sep 2006
Posts: 17473
Location: Hesse/Germany

PostPosted: Fri Sep 09, 2011 7:24    Post subject: Reply with quote
these are very common nic´s so i bet they are already there
_________________
Forum Guidelines...How to get help
&
Forum Rules
&
RTFM/STFW
&
Throw some buzzwords into the WIKI search Exclamation
_________________
I'm NOT rude, just offer pure facts!
_________________
Atheros (TP-Link & Clones, etc ) debrick service in EU
_________________
Guide on HowTo be Safe, Secure and Protect Your Online Anonymity!
Sponsor
Neonium
DD-WRT User


Joined: 23 Jul 2008
Posts: 63

PostPosted: Fri Oct 21, 2011 5:25    Post subject: Reply with quote
This card can also be added?
Quote:

root@DD-WRT:~# lspci
00:00.0 Host bridge: Intel Corporation Mobile 915GM/PM/GMS/910GML Express Processor to DRAM Controller (rev 04)
00:02.0 VGA compatible controller: Intel Corporation Mobile 915GM/GMS/910GML Express Graphics Controller (rev 04)
00:1d.0 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #1 (rev 04)
00:1d.1 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #2 (rev 04)
00:1d.2 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #3 (rev 04)
00:1d.3 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #4 (rev 04)
00:1d.7 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB2 EHCI Controller (rev 04)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev d4)
00:1f.0 ISA bridge: Intel Corporation 82801FBM (ICH6M) LPC Interface Bridge (rev 04)
00:1f.1 IDE interface: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) IDE Controller (rev 04)
00:1f.3 SMBus: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) SMBus Controller (rev 04)
01:00.0 Ethernet controller: Marvell Technology Group Ltd. 88E8001 Gigabit Ethernet Controller (rev 13)
01:01.0 Ethernet controller: Marvell Technology Group Ltd. 88E8001 Gigabit Ethernet Controller (rev 13)
01:02.0 Ethernet controller: Marvell Technology Group Ltd. 88E8001 Gigabit Ethernet Controller (rev 13)
01:03.0 Ethernet controller: Marvell Technology Group Ltd. 88E8001 Gigabit Ethernet Controller (rev 13)
01:04.0 Network and computing encryption device: Cavium Networks Nitrox XL N1 Lite
Sash
DD-WRT Guru


Joined: 20 Sep 2006
Posts: 17473
Location: Hesse/Germany

PostPosted: Fri Oct 21, 2011 9:08    Post subject: Reply with quote
u havent read what to do before posting, right?!
_________________
Forum Guidelines...How to get help
&
Forum Rules
&
RTFM/STFW
&
Throw some buzzwords into the WIKI search Exclamation
_________________
I'm NOT rude, just offer pure facts!
_________________
Atheros (TP-Link & Clones, etc ) debrick service in EU
_________________
Guide on HowTo be Safe, Secure and Protect Your Online Anonymity!
petem
DD-WRT Novice


Joined: 18 Oct 2009
Posts: 26

PostPosted: Wed Jan 25, 2012 22:13    Post subject: Is this card supposed to be detected? Reply with quote
here is what I have from a machine running centos 5.7 with the exact same hardware I want to run dd-wrt

HP T5630 thin client


01:00.0 Ethernet controller: VIA Technologies, Inc. VT6120/VT6121/VT6122 Gigabit Ethernet Adapter (rev 82)
Subsystem: VIA Technologies, Inc. Device 0110
Flags: bus master, fast devsel, latency 0, IRQ 225
I/O ports at ec00 [size=256]
Memory at dfbff000 (64-bit, non-prefetchable) [size=256]
Capabilities: [50] Power Management version 3
Capabilities: [90] Express Endpoint, MSI 00
Capabilities: [c0] MSI: Enable- Count=1/1 Maskable+ 64bit+
Capabilities: [100] Advanced Error Reporting
Capabilities: [130] Device Serial Number xx-xx-xx-xx-xx-xx-xx-xx
Kernel driver in use: via-velocity
Kernel modules: via-velocity


anyone can help??
petem
DD-WRT Novice


Joined: 18 Oct 2009
Posts: 26

PostPosted: Thu Jan 26, 2012 20:02    Post subject: Reply with quote
ok been able to ssh to my thin client and do the lspci -v command so here is the complete result

--------------------------------------------------
00:00.0 Host bridge: VIA Technologies, Inc. VX800 Host Bridge (rev 12)
Subsystem: VIA Technologies, Inc. VX800 Host Bridge
Flags: bus master, medium devsel, latency 8

00:00.1 Host bridge: VIA Technologies, Inc. VX800/VX820 Error Reporting
Flags: bus master, medium devsel, latency 0

00:00.2 Host bridge: VIA Technologies, Inc. VX800/VX820 Host Bus Control
Flags: bus master, medium devsel, latency 0

00:00.3 Host bridge: VIA Technologies, Inc. VX800 PCI to PCI Bridge
Flags: bus master, medium devsel, latency 0

00:00.4 Host bridge: VIA Technologies, Inc. VX800/VX820 Power Management Control
Flags: bus master, medium devsel, latency 0

00:00.5 PIC: VIA Technologies, Inc. VX800/VX820 APIC and Central Traffic Control (prog-if 20 [IO(X)-APIC])
Flags: bus master, fast devsel, latency 0

00:00.6 Host bridge: VIA Technologies, Inc. VX800/VX820 Scratch Registers
Flags: bus master, fast devsel, latency 0

00:00.7 Host bridge: VIA Technologies, Inc. VX800/VX820 North-South Module Interface Control
Flags: bus master, medium devsel, latency 0

00:01.0 VGA compatible controller: VIA Technologies, Inc. VX800/VX820 Chrome 9 HC3 Integrated Graphics (rev 11) (prog-if 00 [VGA controller])
Subsystem: VIA Technologies, Inc. VX800/VX820 Chrome 9 HC3 Integrated Graphics
Flags: bus master, fast devsel, latency 32, IRQ 16
Memory at d8000000 (32-bit, prefetchable) [size=64M]
Memory at de000000 (32-bit, non-prefetchable) [size=16M]
Memory at c0000000 (32-bit, non-prefetchable) [size=256M]
Expansion ROM at 40000000 [disabled] [size=64K]
Capabilities: [60] Power Management version 2
Capabilities: [90] Message Signalled Interrupts: 64bit- Queue=0/0 Enable-

00:03.0 PCI bridge: VIA Technologies, Inc. VX800/VX820 PCI Express Root Port (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 0000e000-0000efff
Memory behind bridge: dfb00000-dfbfffff
Prefetchable memory behind bridge: 00000000dfc00000-00000000dfc00000
Capabilities: [40] #10 [0141]
Capabilities: [68] Power Management version 2
Capabilities: [70] Message Signalled Interrupts: 64bit+ Queue=0/0 Enable-
Capabilities: [98] #0d [0000]

00:0f.0 IDE interface: VIA Technologies, Inc. VX800 Serial ATA and EIDE Controller (prog-if 8a [Master SecP PriP])
Subsystem: VIA Technologies, Inc. VX800 Serial ATA and EIDE Controller
Flags: bus master, medium devsel, latency 32
[virtual] Memory at 000001f0 (32-bit, non-prefetchable) [size=8]
[virtual] Memory at 000003f0 (type 3, non-prefetchable)
[virtual] Memory at 00000170 (32-bit, non-prefetchable) [size=8]
[virtual] Memory at 00000370 (type 3, non-prefetchable)
I/O ports at fc00 [size=16]
Capabilities: [b0] Power Management version 2

00:10.0 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev a0) (prog-if 00 [UHCI])
Subsystem: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller
Flags: bus master, medium devsel, latency 32, IRQ 20
I/O ports at f800 [size=32]
Capabilities: [80] Power Management version 2

00:10.1 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev a0) (prog-if 00 [UHCI])
Subsystem: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller
Flags: bus master, medium devsel, latency 32, IRQ 22
I/O ports at f400 [size=32]
Capabilities: [80] Power Management version 2

00:10.2 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev a0) (prog-if 00 [UHCI])
Subsystem: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller
Flags: bus master, medium devsel, latency 32, IRQ 21
I/O ports at f000 [size=32]
Capabilities: [80] Power Management version 2

00:10.4 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 90) (prog-if 20 [EHCI])
Subsystem: VIA Technologies, Inc. USB 2.0
Flags: bus master, medium devsel, latency 32, IRQ 23
Memory at dffff000 (32-bit, non-prefetchable) [size=256]
Capabilities: [80] Power Management version 2
Capabilities: [88] #0a [20a0]

00:11.0 ISA bridge: VIA Technologies, Inc. VX800/VX820 Bus Control and Power Management
Subsystem: VIA Technologies, Inc. VX800/VX820 Bus Control and Power Management
Flags: medium devsel
Capabilities: [c0] Power Management version 2

00:11.7 Host bridge: VIA Technologies, Inc. VX8xx South-North Module Interface Control
Subsystem: VIA Technologies, Inc.: Unknown device 7323
Flags: medium devsel

00:13.0 PCI bridge: VIA Technologies, Inc. VX855/VX875 PCI to PCI Bridge (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 0000d000-0000dfff
Memory behind bridge: dfe00000-dfefffff
Prefetchable memory behind bridge: 00000000dfd00000-00000000dfd00000
Capabilities: [70] #0d [0000]

00:14.0 Audio device: VIA Technologies, Inc. VT1708/A [Azalia HDAC] (VIA High Definition Audio Controller) (rev 20)
Subsystem: VIA Technologies, Inc. VT1708/A [Azalia HDAC] (VIA High Definition Audio Controller)
Flags: bus master, fast devsel, latency 0, IRQ 16
Memory at dfff8000 (64-bit, non-prefetchable) [size=16K]
Capabilities: [50] Power Management version 2
Capabilities: [60] Message Signalled Interrupts: 64bit+ Queue=0/0 Enable-
Capabilities: [70] #10 [0091]

01:00.0 Ethernet controller: VIA Technologies, Inc. VT6120/VT6121/VT6122 Gigabit Ethernet Adapter (rev 82)
Subsystem: VIA Technologies, Inc.: Unknown device 0110
Flags: fast devsel, IRQ 52
I/O ports at ec00 [size=256]
Memory at dfbff000 (64-bit, non-prefetchable) [size=256]
Capabilities: [50] Power Management version 3
Capabilities: [90] #10 [0001]
Capabilities: [c0] Message Signalled Interrupts: 64bit+ Queue=0/0 Enable-



--------------------------------------------

So is there a way to make this card autodetect??

I did try to install the via-velocity mod with insmod but here is the result:

insmod: cannot insert '/lib/modules/2.6.24.111/kernel/drivers/net/via-velocity.ko': File exists

but on centos the same hardware run with this module/driver..

Please help I would really like that have a great rooter at home...
Zero Hunter
DD-WRT Novice


Joined: 03 Dec 2009
Posts: 42

PostPosted: Sun Jun 10, 2012 22:54    Post subject: Was there ever a fix for . . . Reply with quote
The PC-Engine Boxes and that SR-71 Cards? I stopped looking for months as this did not seem to get addressed.

Any updated?

_________________
Z3r0
Sash
DD-WRT Guru


Joined: 20 Sep 2006
Posts: 17473
Location: Hesse/Germany

PostPosted: Mon Jun 11, 2012 9:14    Post subject: Reply with quote
its working 4 months. but this is the wrong place to ask!
_________________
Forum Guidelines...How to get help
&
Forum Rules
&
RTFM/STFW
&
Throw some buzzwords into the WIKI search Exclamation
_________________
I'm NOT rude, just offer pure facts!
_________________
Atheros (TP-Link & Clones, etc ) debrick service in EU
_________________
Guide on HowTo be Safe, Secure and Protect Your Online Anonymity!
cenriq
DD-WRT User


Joined: 17 Oct 2006
Posts: 188

PostPosted: Sun Jul 01, 2012 15:23    Post subject: Reply with quote
Here is another card that is not supported.

06:00.0 Ethernet controller: Intel Corporation 82573L Gigabit Ethernet Controller
Subsystem: Super Micro Computer Inc: Unknown device 109a
Flags: bus master, fast devsel, latency 0, IRQ 10
Memory at d0100000 (32-bit, non-prefetchable) [size=128K]
I/O ports at 4000 [size=32]
Capabilities: [c8] Power Management version 2
Capabilities: [d0] Message Signalled Interrupts: 64bit+ Queue=0/0 Enable-
Capabilities: [e0] #10 [0001]

07:00.0 Ethernet controller: Intel Corporation 82573L Gigabit Ethernet Controller
Subsystem: Super Micro Computer Inc: Unknown device 109a
Flags: bus master, fast devsel, latency 0, IRQ 11
Memory at d0200000 (32-bit, non-prefetchable) [size=128K]
I/O ports at 5000 [size=32]
Capabilities: [c8] Power Management version 2
Capabilities: [d0] Message Signalled Interrupts: 64bit+ Queue=0/0 Enable-
Capabilities: [e0] #10 [0001]
tvgeffen
DD-WRT Novice


Joined: 21 Aug 2012
Posts: 1

PostPosted: Tue Aug 21, 2012 13:49    Post subject: Reply with quote
I'm trying to install dd-wrt r19519 on my hardware, but the NIC is not detected automatically:

Quote:

02:00.1 Class 0200: 8086:8802 (rev 02)

02:00.1 Ethernet controller: Intel Corporation Platform Controller Hub EG20T Gigabit Ethernet Controller (rev 02)
Flags: bus master, fast devsel, latency 0, IRQ 11
I/O ports at e020 [size=32]
Memory at d0158000 (32-bit, non-prefetchable) [size=512]
Capabilities: [40] Message Signalled Interrupts: 64bit- Queue=0/0 Enable-
Capabilities: [50] Power Management version 2


If I manually insert the oki-semi driver using "insmod pch_gbe" then the card is detected.

pch_gbe 0000:02:00.1: setting latency timer to 64
pch_gbe 0000:02:00.1: MAC address : 00:10:f3:28:d7:c9

But the NIC still isn't working. There's no eth0 device, and I don't get an ip address from dd-wrt.

Can I modify the config so that the NIC is detected or do I have to wait for a next release?
Chris614
DD-WRT Novice


Joined: 29 Aug 2012
Posts: 5

PostPosted: Thu Aug 30, 2012 3:30    Post subject: Reply with quote
tvgeffen wrote:
I'm trying to install dd-wrt r19519 on my hardware, but the NIC is not detected automatically:

Quote:

02:00.1 Class 0200: 8086:8802 (rev 02)

02:00.1 Ethernet controller: Intel Corporation Platform Controller Hub EG20T Gigabit Ethernet Controller (rev 02)
Flags: bus master, fast devsel, latency 0, IRQ 11
I/O ports at e020 [size=32]
Memory at d0158000 (32-bit, non-prefetchable) [size=512]
Capabilities: [40] Message Signalled Interrupts: 64bit- Queue=0/0 Enable-
Capabilities: [50] Power Management version 2


If I manually insert the oki-semi driver using "insmod pch_gbe" then the card is detected.

pch_gbe 0000:02:00.1: setting latency timer to 64
pch_gbe 0000:02:00.1: MAC address : 00:10:f3:28:d7:c9

But the NIC still isn't working. There's no eth0 device, and I don't get an ip address from dd-wrt.

Can I modify the config so that the NIC is detected or do I have to wait for a next release?


did you remember to run?
Code:
ifconfig eth0 up
Compgeke
DD-WRT Novice


Joined: 23 Feb 2013
Posts: 2

PostPosted: Sat Feb 23, 2013 5:11    Post subject: Reply with quote
Somewhat uncommon card(s), but I have a couple 4-port National Semiconductor based cards that use the "CAS" driver.

lspci -v (from one, I have eight of these entries total as I have two 4-port cards):
03:00.0 Ethernet controller: National Semiconductor Corporation DP83065 [Saturn] 10/100/1000 Ethernet Controller (rev 30)
Flags: bus master, 66Mhz, slow devsel, latency 32, IRQ 5
Memory at dd000000 (32-bit, non-prefetchable) [size=2M]
Expansion ROM at 40000000 [disabled] [size=1M]



I pastebined the dmesg due to length, http://pastebin.com/0haqz1EK
BrainSlayer
Site Admin


Joined: 06 Jun 2006
Posts: 6103
Location: Dresden, Germany

PostPosted: Wed May 01, 2013 12:29    Post subject: Reply with quote
added to our detection list
_________________
one cigarette costs 2 minutes of your life.
one bottle of beer costs 4 minutes of your life.
one working day costs 8 hours of your life.

DD-WRT supported Concerts @ Bunker Dresden
03.10.2014 - Front 242 / Haujobb / Planet Myer Day
NetSmith
DD-WRT Novice


Joined: 29 Jan 2009
Posts: 4

PostPosted: Sat Jul 20, 2013 12:13    Post subject: Silicom PXG4U Rev 1.3 [Based on Broadcom BCM5704 GigE rev10] Reply with quote
Eagerly awaiting for this Quad Port Gigabit Ethernet Card to be supported Smile (and do some VLAN provisioning)

Card : Silicom PXG4U
Chipset : BCM5704
Driver : www.ethernet.co.il/downloads/files/PxGx_Linux.zip

    root@DD-WRT:~# lspci
    00:00.0 Host bridge: Advanced Micro Devices, Inc. [AMD] AMD-760 MP [IGD4-2P] System Controller (rev 11)
    00:01.0 PCI bridge: Advanced Micro Devices, Inc. [AMD] AMD-760 MP [IGD4-2P] AGP Bridge
    00:07.0 ISA bridge: Advanced Micro Devices, Inc. [AMD] AMD-768 [Opus] ISA (rev 05)
    00:07.1 IDE interface: Advanced Micro Devices, Inc. [AMD] AMD-768 [Opus] IDE (rev 04)
    00:07.3 Bridge: Advanced Micro Devices, Inc. [AMD] AMD-768 [Opus] ACPI (rev 03)
    00:08.0 PCI bridge: PLX Technology, Inc. PCI6520 64-bit 133MHz PCI-X-to-PCI-X Bridge (rev cb)
    00:0b.0 Ethernet controller: Intel Corporation 82545EM Gigabit Ethernet Controller (Copper) (rev 01)
    00:10.0 PCI bridge: Advanced Micro Devices, Inc. [AMD] AMD-768 [Opus] PCI (rev 05)
      02:04.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5704 Gigabit Ethernet (rev 10)
      02:04.1 Ethernet controller: Broadcom Corporation NetXtreme BCM5704 Gigabit Ethernet (rev 10)
      02:06.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5704 Gigabit Ethernet (rev 10)
      02:06.1 Ethernet controller: Broadcom Corporation NetXtreme BCM5704 Gigabit Ethernet (rev 10)
    03:00.0 USB controller: Advanced Micro Devices, Inc. [AMD] AMD-768 [Opus] USB (rev 07)
    03:07.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Rage XL PCI (rev 27)
    03:08.0 Ethernet controller: Intel Corporation 82557/8/9/0/1 Ethernet Pro 100 (rev 10)
    root@DD-WRT:~#



    root@DD-WRT:~# lspci -v
    02:04.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5704 Gigabit Ethernet (rev 10)
    Subsystem: Broadcom Corporation NetXtreme BCM5704 Gigabit Ethernet
    Flags: bus master, 66Mhz, medium devsel, latency 64, IRQ 11
    Memory at f4100000 (64-bit, non-prefetchable) [size=64K]
    Capabilities: [40] PCI-X non-bridge device.
    Capabilities: [48] Power Management version 2
    Capabilities: [50] Vital Product Data
    Capabilities: [58] Message Signalled Interrupts: 64bit+ Queue=0/3 Enable-

    02:04.1 Ethernet controller: Broadcom Corporation NetXtreme BCM5704 Gigabit Ethernet (rev 10)
    Subsystem: Broadcom Corporation NetXtreme BCM5704 Gigabit Ethernet
    Flags: bus master, 66Mhz, medium devsel, latency 64, IRQ 5
    Memory at f4110000 (64-bit, non-prefetchable) [size=64K]
    Capabilities: [40] PCI-X non-bridge device.
    Capabilities: [48] Power Management version 2
    Capabilities: [50] Vital Product Data
    Capabilities: [58] Message Signalled Interrupts: 64bit+ Queue=0/3 Enable-

    02:06.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5704 Gigabit Ethernet (rev 10)
    Subsystem: Broadcom Corporation NetXtreme BCM5704 Gigabit Ethernet
    Flags: bus master, 66Mhz, medium devsel, latency 64, IRQ 9
    Memory at f4120000 (64-bit, non-prefetchable) [size=64K]
    Capabilities: [40] PCI-X non-bridge device.
    Capabilities: [48] Power Management version 2
    Capabilities: [50] Vital Product Data
    Capabilities: [58] Message Signalled Interrupts: 64bit+ Queue=0/3 Enable-

    02:06.1 Ethernet controller: Broadcom Corporation NetXtreme BCM5704 Gigabit Ethernet (rev 10)
    Subsystem: Broadcom Corporation NetXtreme BCM5704 Gigabit Ethernet
    Flags: bus master, 66Mhz, medium devsel, latency 64, IRQ 10
    Memory at f4130000 (64-bit, non-prefetchable) [size=64K]
    Capabilities: [40] PCI-X non-bridge device.
    Capabilities: [48] Power Management version 2
    Capabilities: [50] Vital Product Data
    Capabilities: [58] Message Signalled Interrupts: 64bit+ Queue=0/3 Enable-

    root@DD-WRT:~# insmod tg3
    insmod: cannot insert '/lib/modules/3.9.4/kernel/drivers/net/ethernet/broadcom/tg3.ko': unknown symbol in module
thegrio
DD-WRT Novice


Joined: 25 Oct 2013
Posts: 3

PostPosted: Sat Oct 26, 2013 1:31    Post subject: r8169 Reply with quote
01:02.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8169 PCI Gigabit Ethernet Controller (rev 10)


Seems to be broken on autodetection in the last BrainSlayer release. Any suggestions on how to fix this from where I'm sitting?

Thanks!
Cortexian
DD-WRT Novice


Joined: 21 Nov 2013
Posts: 2

PostPosted: Thu Nov 21, 2013 15:46    Post subject: Reply with quote
Unfortunately I saw this thread after removing the card to take it back, so I don't have the lspci -v information... However I can tell you the following wouldn't work in my system:

Brand: D-Link
Model: DGE-530T
H/W Version: C1
Goto page Previous  1, 2, 3, 4, 5, 6, 7, 8, 9  Next Display posts from previous:    Page 8 of 9
Post new topic   Reply to topic    DD-WRT Forum Forum Index -> X86 based Hardware All times are GMT

Navigation

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You cannot download files in this forum