DD-WRT Forum :: View topic - TP-Link MR3220 is supported?

Quick Links

Log in

TP-Link MR3220 is supported?

DD-WRT Forum Forum Index -> Atheros WiSOC based Hardware

Goto page 1, 2 Next

View previous topic :: View next topic

Author

Message

RobiGo
DD-WRT Novice

Joined: 04 Apr 2008
Posts: 21

Posted: Fri Apr 13, 2012 22:28 Post subject: TP-Link MR3220 is supported?
TP-Link MR3220 is supported by any version of DD-WRT? I want to use as AP. Thank u!

Sponsor

Sash
DD-WRT Guru

Joined: 20 Sep 2006
Posts: 16865
Location: Hesse/Germany

Posted: Sat Apr 14, 2012 13:12 Post subject:
read: _________________ Forum Guidelines...How to get help & Forum Rules & RTFM/STFW & Its not that hard to throw some buzzwords into the WIKI search _________________ I'm NOT rude, just offer pure facts! _________________ TP-Link (Atheros) debrick service in EU

RobiGo
DD-WRT Novice

Joined: 04 Apr 2008
Posts: 21

Posted: Sun Apr 15, 2012 11:12 Post subject:
Thank You Sash, i have eyes, so i searched before post, but i found in another pages, the MR3220 is based on ar71xx, Atheros AR7241 platform, 400Mhz, 4Mb, flash 32 Ram, Atheros AR9285 (onboard) wireles NIC what is very similar with d-link dir600, TL-WA701nd, and TL-wa901nd.

LOM
DD-WRT Guru

Joined: 28 Dec 2008
Posts: 6110

Posted: Sun Apr 15, 2012 12:24 Post subject:
Don't look in "another pages", look here: http://www.dd-wrt.com/wiki/index.php/Supported_Devices#TP-Link

LOM
DD-WRT Guru

Joined: 28 Dec 2008
Posts: 6110

Posted: Tue Jun 26, 2012 14:50 Post subject:
Test file of r19342 while waiting for Brainslayers official support. Use MR3420 files for updates until the router gets its own build. Use MR3220v1 revert files from the sticky Revert Files thread if you want to revert to stock firmware.

jimbo68
DD-WRT Novice

Joined: 05 Jul 2012
Posts: 4

Posted: Fri Jul 06, 2012 20:44 Post subject:
Does the above test build do everything except the USB support?

LOM
DD-WRT Guru

Joined: 28 Dec 2008
Posts: 6110

Posted: Sat Jul 07, 2012 9:00 Post subject:

jimbo68 wrote:

Does the above test build do everything except the USB support?

It has USB support for 3G modems like the MR3420 which this build is based on.

jimbo68
DD-WRT Novice

Joined: 05 Jul 2012
Posts: 4

Posted: Sat Jul 07, 2012 10:04 Post subject:

LOM wrote:

jimbo68 wrote:

Does the above test build do everything except the USB support?

It has USB support for 3G modems like the MR3420 which this build is based on.

Cheers.

So it's basically a beta build with all functionality, or is there more to be added.

I'll maybe give it a go ....

** EDIT **

Just reading the pre-install checks and noticed I have a version 1.2 router and that the support page only lists version 1.

I guess I'll have to wait and hope 1.2 gets support soon .....

LOM
DD-WRT Guru

Joined: 28 Dec 2008
Posts: 6110

Posted: Sat Jul 07, 2012 11:22 Post subject:
1.0, 1.1, 1.2, it is all the same. TP-Link does only provide update files for v1, they don't make any different ones for the minor version number.

jimbo68
DD-WRT Novice

Joined: 05 Jul 2012
Posts: 4

Posted: Sat Jul 07, 2012 13:10 Post subject:

LOM wrote:

1.0, 1.1, 1.2, it is all the same.
TP-Link does only provide update files for v1, they don't make any different ones for the minor version number.

Right OK, thanks.

I'll give it a go then ......

jimbo68
DD-WRT Novice

Joined: 05 Jul 2012
Posts: 4

Posted: Sun Jul 08, 2012 0:37 Post subject:

I've put the above firmware on and that went fine.

Using the following links, I have set the router up as switch with wireless enabled, connected to my primary router via an ethernet cable.

http://www.dd-wrt.com/wiki/index.php/Switch
http://www.dd-wrt.com/wiki/index.php/Wireless_Access_Point

I can connect wirelessly to my "new" dd-wrt device and that works fine with my laptop getting an ip address (from the primary router) and I can get on the internet.

However, when I connect my laptop to the "new" dd-wrt device, I do not get an ip address and can't get on the net. Also, when I connect a device with a static ip via cable, it can't get on the internet either.

Don't know what's wrong? DHCP is disabled on the secondary TP-Link device.

I've also tried assigning a fixed ip to my laptop, but that didn't work.

Any help appreciated. I'm lost with this and have done hard resets and tried it a couple of times.

LOM
DD-WRT Guru

Joined: 28 Dec 2008
Posts: 6110

Posted: Sun Jul 08, 2012 2:51 Post subject:
build r19342 suffers from a lan port isolation bug, the lan ports can not see each other. It has been corrected but there has yet not been any builds released after the fix.

Spidex
DD-WRT Novice

Joined: 12 Jul 2012
Posts: 12

Posted: Thu Jul 26, 2012 22:03 Post subject:

LOM wrote:

jimbo68 wrote:

Does the above test build do everything except the USB support?

It has USB support for 3G modems like the MR3420 which this build is based on.

According to the following DD-WRT FAQ, routers with 4MB or less flash do not have enough room for 3G support:
http://www.dd-wrt.com/wiki/index.php/3G_/_3.5G#Supported_Plattforms

Is this true? Both the MR-3220 AND MR-3420 have 4MB flash, which would sort of defeat the purpose of using these routers

epo
DD-WRT Novice

Joined: 03 Sep 2012
Posts: 1

Posted: Mon Sep 03, 2012 8:29 Post subject:
Hi I saw my MR3220 in DDWRT supported list http://www.dd-wrt.com/wiki/index.php/Supported_Devices#TP-Link However I couldn't find above model in http://www.dd-wrt.com/site/support/router-database May I know why ?

lamero
DD-WRT Novice

Joined: 09 May 2011
Posts: 24

Posted: Tue Sep 04, 2012 14:33 Post subject:
Can back to original firmware?

Goto page 1, 2 Next

Display posts from previous:

Page 1 of 2

DD-WRT Forum Forum Index -> Atheros WiSOC based Hardware

All times are GMT

Navigation

Jump to:

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You cannot download files in this forum