tcpdump "Bus error" (build 18024 on WRT-54GL)

Post new topic   Reply to topic    DD-WRT Forum Forum Index -> Broadcom SoC basierende Hardware
Author Message
andusvan
DD-WRT Novice


Joined: 05 Feb 2012
Posts: 5

PostPosted: Tue Feb 21, 2012 15:58    Post subject: tcpdump "Bus error" (build 18024 on WRT-54GL) Reply with quote
Hallo!

Ich bräuchte auf meinem WRT-54GL ein tcpdump.
Ich habe Build 18024 (mini) laufen.

Wenn ich jedoch eine (fast) beliebige Version installieren,
dann bekomme ich immer ein "Bus error".

Wer weiß hierzu Einzelheiten oder hat sogar ein funktionierendes Paket??

Gruß
SA
Sponsor
acarrillo
DD-WRT Novice


Joined: 29 Jun 2012
Posts: 1

PostPosted: Fri Jun 29, 2012 19:48    Post subject: Reply with quote
Bumping, but in english.

I attempted to install tcpdump on my WRT54GL v1.1 by using the openwrt cross-compiler via these instructions. The router currently has DD-WRT v24-sp2 installed.

The file at least appears to be of the right type:

Code:

$ file tcpdump
tcpdump: ELF 32-bit LSB executable, MIPS, MIPS32 version 1, statically linked, with unknown capability 0xf41 = 0x756e6700, with unknown capability 0x70100 = 0x3040000, not stripped


Perhaps openwrt-compiled binaries work on Tomato firmware and not dd-wrt? Or maybe it's a partition space issue...as tcpdump leaves me with about 56KB to spare. I'm thinking of installing openwrt to see if I can get it working there.
Display posts from previous:    Page 1 of 1
Post new topic   Reply to topic    DD-WRT Forum Forum Index -> Broadcom SoC basierende Hardware All times are GMT

Navigation

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You can attach files in this forum
You can download files in this forum