Multiple WLAN Problem

Post new topic   Reply to topic    DD-WRT Forum Index -> Advanced Networking
Author Message
goodramen4you
DD-WRT Novice


Joined: 01 Jul 2012
Posts: 3

PostPosted: Sun Jul 01, 2012 4:10    Post subject: Multiple WLAN Problem Reply with quote
Hi, I have a WRT54G v2.0 router with build 14929 mini installed.

When I foliow, http://www.dd-wrt.com/wiki/index.php/Multiple_WLANs to set up a guest access point, the Virtual Interface does not show up on any of my computer's routers. My settings are:


Physical Interface wl0 - SSID [dd-wrt] HWAddr [....]
Wireless Mode AP
Wireless Network Mode Mixed
Wireless Network Name (SSID) dd-wrt
Wireless Channel 6 - 2.437 GHz
Wireless SSID Broadcast Enable
Sensitivity Range (ACK Timing) 2000
Network Configuration Bridged

Virtual Interfaces

Virtual Interfaces wl0.1 SSID [dd-wrt_vap] HWAddr[....]
Wireless Network Name (SSID) dd-wrt_vap
Wireless SSID Broadcast Enable
AP Isolation Disable
Network Configuration Bridged


I followed the guide exactly and all I do after doing a 30/30/30 reset is Add the Virtual Interface and it refuses to show up, only dd-wrt will show up but not dd-wrt_vap. It will not connect even if I manually attempt to connect.

P.S. MAC addresses are left off on purpose.


Last edited by goodramen4you on Sun Jul 01, 2012 4:39; edited 1 time in total
Sponsor
goodramen4you
DD-WRT Novice


Joined: 01 Jul 2012
Posts: 3

PostPosted: Sun Jul 01, 2012 4:38    Post subject: Reply with quote
It will not connect even if I manually enter it.
goodramen4you
DD-WRT Novice


Joined: 01 Jul 2012
Posts: 3

PostPosted: Sun Jul 01, 2012 6:19    Post subject: Reply with quote
Yes, I did a 30/30/30 before doing this. And I even reattempt it after doing another 30/30/30.
sos
DD-WRT Novice


Joined: 12 Mar 2010
Posts: 10

PostPosted: Fri May 13, 2016 22:28    Post subject: Solved Reply with quote
At the very real risk of being accused of thread necro-bumping, I thought I'd provide a solution to anyone else trying to get multi-SSID wifi going on one of these old girls.

I too was having trouble getting the wl0.1 radio to transmit. After trying tomato and various newer (ftp://ftp.dd-wrt.com/betas/2016/04-25-2016-r29519/broadcom/) and older (ftp://ftp.dd-wrt.com/others/eko/BrainSlayer-V24-preSP2/2010/08-12-10-r14929/broadcom/dd-wrt.v24_mini_wrt54gs.bin) dd-wrt builds, the build that finally got VAP's working is "DD-WRT v24-sp2 (07/22/09) micro (SVN revision 12548M VINT Eko)", download from here: ftp://ftp.dd-wrt.com/others/eko/V24_TNG/svn12548/

I'm not saying that's the best or only build, but it's doing the job here.

[EDIT: Fantastic - I've got VLAN tagging working too (via pfSense, through a netgear GS108Tv2 switch, and am using the WRT54GS simply as an AP). Gotta love the power of dd-wrt & pfSense - a match made in heaven]
Display posts from previous:    Page 1 of 1
Post new topic   Reply to topic    DD-WRT Forum Index -> Advanced Networking All times are GMT

Navigation

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You cannot download files in this forum