Joined: 19 Dec 2010 Posts: 4 Location: Silicon Valley
Posted: Fri Jun 29, 2012 4:54 Post subject:
Aveyer wrote:
After 11 days uptime on my WZR-HP-G300NH V1, wireless seems to have slowed to a crawl, which is the first time I've ever experienced this. Will watch it for a while before I reboot it.
Same here. I have 65% signal quality 10 feet away and Tx/Rx rates are dropping from 130M to 5M and staying there for hours. I also have to power cycle every time I do any settings change to get the WiFi signal back. _________________ WZR-HP-G300NH - DD-WRT v24-sp2 (12/18/10) std - build 15962
Posted: Fri Jun 29, 2012 7:05 Post subject: OpenVPN not working anymore on this release
i flashed this version (19342) on my TPLINK 1043ND. (1.
Wifi seems more stable. (less dropouts)
Disabled "Use DNSMasq for DHCP" and reduced Wifi power from 20 to 18 db.
Don't know if that was the previous long time bug however.
But now my OpenVPN isn't working anymore :
until 18777 OpenVPN was working fine.
OpenVPN get's fully connected, but when i try to ping a local IP adress (at home) from my remote location I don't get an answer : even the router local ip adress isn't reachable anymore.
With r18777, when I am connected I can just type my local router IP to reach for ex. the web interface.
Anyone with the same problem ? OpenVPN log doesn't give any errors.
Really dissapointed that 1 problem is fixed and more new problems are introduced.
Joined: 06 Feb 2010 Posts: 7401 Location: Little Rock
Posted: Fri Jun 29, 2012 11:46 Post subject:
mntbighker wrote:
Aveyer wrote:
After 11 days uptime on my WZR-HP-G300NH V1, wireless seems to have slowed to a crawl, which is the first time I've ever experienced this. Will watch it for a while before I reboot it.
Same here. I have 65% signal quality 10 feet away and Tx/Rx rates are dropping from 130M to 5M and staying there for hours. I also have to power cycle every time I do any settings change to get the WiFi signal back.
Yes, but as Aveyer responded back, come to find out that it was more of a user/device error regarding the Samsung Galaxy. I use both wzr-hp-g300nh and wzr-hp-ag300h and this has been a great build so far - and contrary to what you are saying here, i have much better wireless with this build than when i used 18777, with 18777 it always fluxed back and forth and i never really could get a 300mbps link, now i get the 300mbps link with no fluxes. i'd re-check your config and settings. _________________ Wireless N Config | Linking Routers | DD-WRT Wiki | DD-WRT Builds | Peacock - Broadcom FAQ
After 11 days uptime on my WZR-HP-G300NH V1, wireless seems to have slowed to a crawl, which is the first time I've ever experienced this. Will watch it for a while before I reboot it.
Same here. I have 65% signal quality 10 feet away and Tx/Rx rates are dropping from 130M to 5M and staying there for hours. I also have to power cycle every time I do any settings change to get the WiFi signal back.
Yes, but as Aveyer responded back, come to find out that it was more of a user/device error regarding the Samsung Galaxy. I use both wzr-hp-g300nh and wzr-hp-ag300h and this has been a great build so far - and contrary to what you are saying here, i have much better wireless with this build than when i used 18777, with 18777 it always fluxed back and forth and i never really could get a 300mbps link, now i get the 300mbps link with no fluxes. i'd re-check your config and settings.
And enable RTS/CTS Protection and RTS Threshold, everything has been fine here since. _________________ WZR-HP-G300NH [B0 B0]
WHR-G300N V1 (Ralink)
In TP-Link TL-WR741ND v1 SES / AOSS / EZ-SETUP / WPS Button turning off radio & turn radio off at boot functions doesn't work.
The WPS LED blinks when I press 1 second the WPS button but nothing happens.
Now running a couple of weeks with this latest firmware version.
My conclusion.
Wifi is much more stable
PPTP-server not working
An when i download at full-speed from internet (40mbit) and i copy from one pc to a NAS at 9MBps then after a while the router stops completely and i have to unplug and replug the power.
Since wifi is most important for me, i will stick to this, but happy? hmmm, not really. Need actually vpn for my work
Posted: Wed Jul 04, 2012 20:39 Post subject: Port Forwarding not working on 18777
I have run the same configuration on both v18777 on a Netgear n600-wndr3800 and v13064 on a wrt54gl. Port forwarding works find on 13064 and not on 18777. Here is the output from the n600 iptables.
Any ideas? is the netgear wndr3800 not supported with dd-wrt? if not, I'm moving onto another router fast!
Joined: 06 Feb 2010 Posts: 7401 Location: Little Rock
Posted: Thu Jul 05, 2012 1:06 Post subject: Re: Port Forwarding not working on 18777
sharkriver wrote:
I have run the same configuration on both v18777 on a Netgear n600-wndr3800 and v13064 on a wrt54gl. Port forwarding works find on 13064 and not on 18777. Here is the output from the n600 iptables.
Any ideas? is the netgear wndr3800 not supported with dd-wrt? if not, I'm moving onto another router fast!