how to flash back from openwrt to ddwrt on wzr-hp-g300nh2

Post new topic   Reply to topic    DD-WRT Forum Forum Index -> Atheros WiSOC based Hardware
Author Message
djxwolf
DD-WRT Novice


Joined: 05 Jan 2012
Posts: 5

PostPosted: Fri Jan 06, 2012 7:20    Post subject: how to flash back from openwrt to ddwrt on wzr-hp-g300nh2 Reply with quote
is tftp method useful?
Any other convient method (like mtd)?
which image should i choose?
buffalo_to_ddwrt_webflash-MULTI.bin
or
wzr-hp-g300nh2-dd-wrt-webupgrade-MULTI.bin ?
Sponsor
djxwolf
DD-WRT Novice


Joined: 05 Jan 2012
Posts: 5

PostPosted: Sat Jan 07, 2012 2:11    Post subject: Reply with quote
Nobody can help me? Sad
LOM
DD-WRT Guru


Joined: 28 Dec 2008
Posts: 7110

PostPosted: Sat Jan 07, 2012 2:35    Post subject: Reply with quote
djxwolf wrote:
Nobody can help me? Sad


Wrong forum, ask in the OpenWRT forum how to restore stock fimware when running OpenWRT.

_________________
I'm on a whiskey diet, lost 3 days already
djxwolf
DD-WRT Novice


Joined: 05 Jan 2012
Posts: 5

PostPosted: Sat Jan 07, 2012 4:55    Post subject: Reply with quote
got it. thanks.
nchall
DD-WRT Novice


Joined: 04 Nov 2010
Posts: 8

PostPosted: Fri Jul 06, 2012 20:57    Post subject: Reply with quote
Use buffalo_to_ddwrt_webflash-MULTI.bin and these instructions to setup the tftp:

1.Download pumpKIN http://kin.klever.net/pumpkin save you wasting time with tftp and the command line

2.Unplug all the ethernet cable and the power cable and connect the computer directly to the router(still leave it off)

3.Go to Control Panel\Network and Internet\Network Connections in win7
right click on local area connection and choose "properties"
choose "internet protocol version 4"
click properties then click "use the following ip address"
Enter these values:
IP address 192.168.11.2, subnet mask 255.255.255.0, default gateway192.168.11.1

4.then turn off firewall go to Control Panel\Network and Internet\Network and Sharing Centre click on windows firewall then
choose "turn windows firewall on or off" then click on every "turn windows firewall off" box.

5.Open a Windows command prompt as Administrator. type cmd in the search box from Start menu, then press Ctrl+Shift+Enter. You will be prompted with the User Account Control dialogue choose yes. OR just right click on CMD and choose run as administrator.
Type the command
route print
to get a list of your NIC(s). Write down the interface number for the LAN card, in my case, it's 10, you may need to scroll up. mine is the first one "Realtek PCIe GBE Family Controller"

6.Now type the command below to get the ARP binding(thanks ermax at DD-WRT forum):
Replacing the number 10 with the interface number

netsh interface ipv4 add neighbors 10 192.168.11.1 02-AA-BB-CC-DD-1A

7.Run pumpKIN utility choose "Put File"

8.Put 192.168.11.1 as remote host, local File is buffalo_to_ddwrt_webflash-MULTI.bin
Display posts from previous:    Page 1 of 1
Post new topic   Reply to topic    DD-WRT Forum Forum Index -> Atheros WiSOC based Hardware All times are GMT

Navigation

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You cannot download files in this forum