Thank You Sash, i have eyes, so i searched before post, but i found in another pages, the MR3220 is based on ar71xx, Atheros AR7241 platform, 400Mhz, 4Mb, flash 32 Ram, Atheros AR9285 (onboard) wireles NIC what is very similar with d-link dir600, TL-WA701nd, and TL-wa901nd.
Test file of r19342 while waiting for Brainslayers official support.
Use MR3420 files for updates until the router gets its own build.
Use MR3220v1 revert files from the sticky Revert Files thread if you want to revert to stock firmware. _________________ Kernel panic: Aiee, killing interrupt handler!
1.0, 1.1, 1.2, it is all the same.
TP-Link does only provide update files for v1, they don't make any different ones for the minor version number. _________________ Kernel panic: Aiee, killing interrupt handler!
I can connect wirelessly to my "new" dd-wrt device and that works fine with my laptop getting an ip address (from the primary router) and I can get on the internet.
However, when I connect my laptop to the "new" dd-wrt device, I do not get an ip address and can't get on the net. Also, when I connect a device with a static ip via cable, it can't get on the internet either.
Don't know what's wrong? DHCP is disabled on the secondary TP-Link device.
I've also tried assigning a fixed ip to my laptop, but that didn't work.
Any help appreciated. I'm lost with this and have done hard resets and tried it a couple of times.
build r19342 suffers from a lan port isolation bug, the lan ports can not see each other.
It has been corrected but there has yet not been any builds released after the fix. _________________ Kernel panic: Aiee, killing interrupt handler!