Vaelek DD-WRT Novice
Joined: 07 Jul 2012 Posts: 4
|
Posted: Mon Jul 09, 2012 6:14 Post subject: MonWRTor SNMP monitor |
|
I'm not sure if this is the correct place to post something like this or not. In searching for a good SNMP app to use with DD-WRT I came up pretty empty or didn't really care for what I found, so I made my own.
If your router is at 192.168.0.1 and you have not changed the Community value, it should just work. Otherwise you will be presented with the settings dialog.
It should be pretty straightforward. It will graph bandwidth for the chosen interface (default is eth1, which on mine is WAN. It may vary for others so I suggest comparing the values with the graphs in the web interface to determine which is which for you) and load averages (*100), as well as show the total transferred, average/max speeds, and memory usage.
So far it has not been used by anyone but myself so feedback is essential.
The only requirement is .NET 4.
Enjoy! - http://s.vaelek.com/MonWRTor
|
|