Posted: Tue Aug 21, 2012 21:39 Post subject: Cisco Valet M20 - Unable to get 40MHz Channel Width
I am running K26 Build 19519 mini on my Cisco Valet M20 v1. It advertises itself as a 300Mbps router, but I am only able to get 130Mbps max. I have placed it into 40MHz mode, but InSSIDer is showing that the router is not doing channel bonding as it supposed to. DD-WRT will say that it is doing channel bonding (e.g. 6+4), but it seems that it is not.
Does anyone know how to fix this problem? Do I have a defective router? I have it in N-only mode, so no B or G devices should be on my network. I have a new wireless printer that is also connected to it, so if it were a G printer then it would not connect, right?
You should play a little with channel width and such, pressing Save instead of Apply, then playing some more until you get the proper setting. _________________ Asus RT-N16 running Kong 22000+ kingkong-nv32k-broadcom with OTRW2
E4200 V1 running Kong 22000+ kingkong-nv60k-broadcom with OTRW2
2 times Linksys WRT610N V2 converted to E3000 running Kong 22000+ usb-ftp-samba3-dlna-nv60k-broadcom with OTRW2 (bridged with LAN cable)