Posted: Tue Aug 21, 2012 21:39 Post subject: Cisco Valet M20 - Unable to get 40MHz Channel Width
Hey guys,
I am running K26 Build 19519 mini on my Cisco Valet M20 v1. It advertises itself as a 300Mbps router, but I am only able to get 130Mbps max. I have placed it into 40MHz mode, but InSSIDer is showing that the router is not doing channel bonding as it supposed to. DD-WRT will say that it is doing channel bonding (e.g. 6+4), but it seems that it is not.
Does anyone know how to fix this problem? Do I have a defective router? I have it in N-only mode, so no B or G devices should be on my network. I have a new wireless printer that is also connected to it, so if it were a G printer then it would not connect, right?
I thought I was the only one having this problem. I know there are those who(m) know something to help out here. I'll continue searching, but....anyone? Bueller?
You should play a little with channel width and such, pressing Save instead of Apply, then playing some more until you get the proper setting. _________________ 2 times APU2 Opnsense 21.1 with Sensei
2 times RT-AC56U running DD-WRT 45493 (one as Gateway, the other as AP, both bridged with LAN cable)
3 times Asus RT-N16 shelved
E4200 V1 running freshtomato 2020.8 (bridged with LAN cable)
3 times Linksys WRT610N V2 converted to E3000 and 1 original E3000 running freshtomato 2020.8 (bridged with LAN cable)