Author
Message
robbieinc DD-WRT Novice Joined: 29 Oct 2012 Posts: 18
Posted: Tue Oct 30, 2012 2:15 Post subject:
Captured the dmesg error when accessing /dev/usb/tts/0.
Code: CPU 0 Unable to handle kernel paging request at virtual address 00000088, epc == 87d07908, ra == 87d07000
Oops[#1]:
Cpu 0
$ 0 : 00000000 1100fc00 00000507 87b19008
$ 4 : 00000000 00000010 87cba100 00000040
$ 8 : 00000001 87b19008 00000002 87cba01c
$12 : ffffffff 00000000 0000002b 00435238
$16 : 00000003 87cba100 87cba108 00000008
$20 : 00000010 00000000 00000000 80000000
$24 : 000000c2 00000000
$28 : 87bb2000 87bb3c48 87b19008 87d07000
Hi : 0000005e
Lo : 5e5e5ebc
epc : 87d07908 Not tainted
ra : 87d07000 Status: 1100fc03 KERNEL EXL IE
Cause : 00000008
BadVA : 00000088
PrId : 00019749
Modules linked in: nf_nat_pptp nf_conntrack_pptp nf_nat_proto_gre nf_conntrack_proto_gre xt_mark etherip ftdi_sio usbserial fuse usblp usb_storage sd_mod scsi_wait_scan scsi_mod ohci_hcd uhci_hcd ehci_hcd usbcore nls_base switch_robo switch_core bcm57xx
Process cat (pid: 1647, threadinfo=87bb2000, task=87f23b68)
Stack : 8005e81c 8005e3b4 00020000 81300a00 00000fcc 00000000 00000007 00000001
00000000 8004a854 00020000 00001000 87bb3e0c 00001000 81300140 00000000
87e49120 ffffffff 8000a080 80014f20 80647560 00000000 00000000 00000114
87ff6320 80079bd0 00000107 87abaec8 87bb3ea8 87bb3ea8 87ab8030 87abaec8
87bb3ea8 80079f7c 1100fc01 fffffff4 87b37100 87cba100 00001388 87bb3d48
...
Call Trace:[<8005e81c>][<8005e3b4>][<8004a854>][<8000a080>][<80014f20>][<80079bd0>][<80079f7c>][<87d09444>][<87d0842c>][<87d09728>][<87d096e4>][<87a11c88>][<8001be00>][<8010879c>][<80102dd0>][<879597f8>][<8010688c>][<80073e20>][<8007e270>][<80073c84>][<8006e98c>][<8007e620>][<8006ebb4>][<8006ec18>][<800636f4>][<8006361c>][<8006e73c>][<8007a55c>][<8006ec98>][<8006ec5c>][<80013190>]
Code: 000000c0 09f41ea9 02c01021 <8e620080> 02803021 8c420030 02602021 0040f809 02202821
The "Cause : 00000008" seems to be similar to this open ticket: http://svn.dd-wrt.com/ticket/2580 . Any help would be greatly appreciated! :]
Back to top
Sponsor
GH0 DD-WRT User Joined: 05 Dec 2008 Posts: 249
Posted: Tue Oct 30, 2012 22:25 Post subject:
To figure out where the issue lies, we might need fractal's .map file for when he created the firmware. Once we get that, we can figure out what is happening.
Join us in ##dd-wrt on freenode to help us out if you are interested in fixing the issue. I am thinking about updating the ticket as it isn't solely happening on ext drives, but happening on fat/ntfs as well, if you throw enough data at it.
Back to top
DaGoombah DD-WRT Novice Joined: 31 Oct 2012 Posts: 2
Posted: Wed Oct 31, 2012 14:25 Post subject: Its really not intuitive to me
I have read this whole post. I have also gone to the wiki page for the N66U. For the most part I understand all the items addressed but what is not clear to me after getting to the end of the thread on exactly what the steps are/should be to load dd-wrt onto my N66U.
In the wiki it states that I will need to load a .trx file and then a .bin. But when I go to the downloads there are only two .trx files. One called mini and one BIG. I see there are items addressing the CFE but again its not clear to me if i need to execute those steps or just load one (or both) of the .trx files. And then... is there a bin? All other dd-wrt firmware loads have always been a .bin. As an FYI I am running ASUS firmware vs 3.0.0.4.246
Sorry for confusion and any help in a list of steps and the order they need to be executed is greatly appreciated.
Back to top
benito11 DD-WRT User Joined: 10 Jan 2011 Posts: 56
Posted: Wed Oct 31, 2012 14:52 Post subject:
I forgot my laptop at work... but if you can wait on monday I will make a step by step guide. I have it in a plain text file.
Back to top
DaGoombah DD-WRT Novice Joined: 31 Oct 2012 Posts: 2
Posted: Wed Oct 31, 2012 16:44 Post subject: Thanks benito!
Monday is fine. I am in no rush. I just purchased the router and can wait and I certainly don't want to brick it. The CFE part is what confuses me the most. Enjoy the weekend and I look forward to your reply!
Back to top
Fractal DD-WRT Guru Joined: 19 Apr 2010 Posts: 1243
Posted: Wed Oct 31, 2012 17:07 Post subject:
robbieinc wrote: Captured the dmesg error when accessing /dev/usb/tts/0.
Code: CPU 0 Unable to handle kernel paging request at virtual address 00000088, epc == 87d07908, ra == 87d07000
Oops[#1]:
Cpu 0
$ 0 : 00000000 1100fc00 00000507 87b19008
$ 4 : 00000000 00000010 87cba100 00000040
$ 8 : 00000001 87b19008 00000002 87cba01c
$12 : ffffffff 00000000 0000002b 00435238
$16 : 00000003 87cba100 87cba108 00000008
$20 : 00000010 00000000 00000000 80000000
$24 : 000000c2 00000000
$28 : 87bb2000 87bb3c48 87b19008 87d07000
Hi : 0000005e
Lo : 5e5e5ebc
epc : 87d07908 Not tainted
ra : 87d07000 Status: 1100fc03 KERNEL EXL IE
Cause : 00000008
BadVA : 00000088
PrId : 00019749
Modules linked in: nf_nat_pptp nf_conntrack_pptp nf_nat_proto_gre nf_conntrack_proto_gre xt_mark etherip ftdi_sio usbserial fuse usblp usb_storage sd_mod scsi_wait_scan scsi_mod ohci_hcd uhci_hcd ehci_hcd usbcore nls_base switch_robo switch_core bcm57xx
Process cat (pid: 1647, threadinfo=87bb2000, task=87f23b68)
Stack : 8005e81c 8005e3b4 00020000 81300a00 00000fcc 00000000 00000007 00000001
00000000 8004a854 00020000 00001000 87bb3e0c 00001000 81300140 00000000
87e49120 ffffffff 8000a080 80014f20 80647560 00000000 00000000 00000114
87ff6320 80079bd0 00000107 87abaec8 87bb3ea8 87bb3ea8 87ab8030 87abaec8
87bb3ea8 80079f7c 1100fc01 fffffff4 87b37100 87cba100 00001388 87bb3d48
...
Call Trace:[<8005e81c>][<8005e3b4>][<8004a854>][<8000a080>][<80014f20>][<80079bd0>][<80079f7c>][<87d09444>][<87d0842c>][<87d09728>][<87d096e4>][<87a11c88>][<8001be00>][<8010879c>][<80102dd0>][<879597f8>][<8010688c>][<80073e20>][<8007e270>][<80073c84>][<8006e98c>][<8007e620>][<8006ebb4>][<8006ec18>][<800636f4>][<8006361c>][<8006e73c>][<8007a55c>][<8006ec98>][<8006ec5c>][<80013190>]
Code: 000000c0 09f41ea9 02c01021 <8e620080> 02803021 8c420030 02602021 0040f809 02202821
The "Cause : 00000008" seems to be similar to this open ticket: http://svn.dd-wrt.com/ticket/2580 . Any help would be greatly appreciated! :]
I think these errors you are talking about are related to this.... been doing alot of investigation on this:
http://git.kernel.org/?p=linux/kernel/git/stable/linux-stable.git;a=commitdiff;h=487f9c6710e7dff338e59820f6cfaeaaa87cb532
-Fractal
Back to top
GH0 DD-WRT User Joined: 05 Dec 2008 Posts: 249
Posted: Wed Oct 31, 2012 23:58 Post subject:
Fractal wrote: robbieinc wrote: Captured the dmesg error when accessing /dev/usb/tts/0.
Code: CPU 0 Unable to handle kernel paging request at virtual address 00000088, epc == 87d07908, ra == 87d07000
Oops[#1]:
Cpu 0
$ 0 : 00000000 1100fc00 00000507 87b19008
$ 4 : 00000000 00000010 87cba100 00000040
$ 8 : 00000001 87b19008 00000002 87cba01c
$12 : ffffffff 00000000 0000002b 00435238
$16 : 00000003 87cba100 87cba108 00000008
$20 : 00000010 00000000 00000000 80000000
$24 : 000000c2 00000000
$28 : 87bb2000 87bb3c48 87b19008 87d07000
Hi : 0000005e
Lo : 5e5e5ebc
epc : 87d07908 Not tainted
ra : 87d07000 Status: 1100fc03 KERNEL EXL IE
Cause : 00000008
BadVA : 00000088
PrId : 00019749
Modules linked in: nf_nat_pptp nf_conntrack_pptp nf_nat_proto_gre nf_conntrack_proto_gre xt_mark etherip ftdi_sio usbserial fuse usblp usb_storage sd_mod scsi_wait_scan scsi_mod ohci_hcd uhci_hcd ehci_hcd usbcore nls_base switch_robo switch_core bcm57xx
Process cat (pid: 1647, threadinfo=87bb2000, task=87f23b68)
Stack : 8005e81c 8005e3b4 00020000 81300a00 00000fcc 00000000 00000007 00000001
00000000 8004a854 00020000 00001000 87bb3e0c 00001000 81300140 00000000
87e49120 ffffffff 8000a080 80014f20 80647560 00000000 00000000 00000114
87ff6320 80079bd0 00000107 87abaec8 87bb3ea8 87bb3ea8 87ab8030 87abaec8
87bb3ea8 80079f7c 1100fc01 fffffff4 87b37100 87cba100 00001388 87bb3d48
...
Call Trace:[<8005e81c>][<8005e3b4>][<8004a854>][<8000a080>][<80014f20>][<80079bd0>][<80079f7c>][<87d09444>][<87d0842c>][<87d09728>][<87d096e4>][<87a11c88>][<8001be00>][<8010879c>][<80102dd0>][<879597f8>][<8010688c>][<80073e20>][<8007e270>][<80073c84>][<8006e98c>][<8007e620>][<8006ebb4>][<8006ec18>][<800636f4>][<8006361c>][<8006e73c>][<8007a55c>][<8006ec98>][<8006ec5c>][<80013190>]
Code: 000000c0 09f41ea9 02c01021 <8e620080> 02803021 8c420030 02602021 0040f809 02202821
The "Cause : 00000008" seems to be similar to this open ticket: http://svn.dd-wrt.com/ticket/2580 . Any help would be greatly appreciated! :]
I think these errors you are talking about are related to this.... been doing alot of investigation on this:
http://git.kernel.org/?p=linux/kernel/git/stable/linux-stable.git;a=commitdiff;h=487f9c6710e7dff338e59820f6cfaeaaa87cb532
-Fractal
Is there any way that you could include debugging symbols, or as I mentioned in the PM to you, include the vmlinuz.map file that you are building the firmware with?
Back to top
Fractal DD-WRT Guru Joined: 19 Apr 2010 Posts: 1243
Posted: Thu Nov 01, 2012 6:26 Post subject:
new bins for modded 64k cfe are up on barrywares ftp 20202
-Fractal
Back to top
Nebudchanezzer DD-WRT User Joined: 09 Apr 2012 Posts: 60
Posted: Thu Nov 01, 2012 10:06 Post subject:
Fractal wrote: new bins for modded 64k cfe are up on barrywares ftp 20202
-Fractal
Thank you!
Back to top
benito11 DD-WRT User Joined: 10 Jan 2011 Posts: 56
Posted: Thu Nov 01, 2012 10:55 Post subject:
Could you please make a changelog to check if it is worth to upgrade please?.
EDIT: OpenVPN webpage issues have been solved.
Thank you so much! Last edited by benito11 on Thu Nov 01, 2012 19:29; edited 1 time in total
Back to top
GH0 DD-WRT User Joined: 05 Dec 2008 Posts: 249
Posted: Thu Nov 01, 2012 13:41 Post subject:
@benito, you can look at the svn.dd-wrt.com to see the changelog between the two versions.
@fractal, is there a reason the updated files are in .trx format? Can the extensions be switched to .bin and still operate normally for an upgrade?
Back to top
Fractal DD-WRT Guru Joined: 19 Apr 2010 Posts: 1243
Posted: Thu Nov 01, 2012 15:08 Post subject:
GH0 wrote: @benito, you can look at the svn.dd-wrt.com to see the changelog between the two versions.
@fractal, is there a reason the updated files are in .trx format? Can the extensions be switched to .bin and still operate normally for an upgrade?
Gho,
you can use the .trx to upgrade your existing installation of dd-wrt on your modd'd 64kcfe n66u.... That is why I used the .trx
-Fractal
Back to top
benito11 DD-WRT User Joined: 10 Jan 2011 Posts: 56
Posted: Thu Nov 01, 2012 19:30 Post subject:
GH0 wrote: @benito, you can look at the svn.dd-wrt.com to see the changelog between the two versions.
@fractal, is there a reason the updated files are in .trx format? Can the extensions be switched to .bin and still operate normally for an upgrade?
I have seen many changes there. I updated and openVPN webpage problems have been solved
Thank you!
Back to top
fritsp1989 DD-WRT Novice Joined: 16 Oct 2012 Posts: 13
Posted: Thu Nov 01, 2012 22:31 Post subject:
Can we run optware now on this build ?
Because previous build dropped everything when i attached a usb storage
Back to top
Fractal DD-WRT Guru Joined: 19 Apr 2010 Posts: 1243
Posted: Thu Nov 01, 2012 22:49 Post subject:
fritsp1989 wrote: Can we run optware now on this build ?
Because previous build dropped everything when i attached a usb storage
I have not tested usb auto mount for NTFS, I will try that tonight... I did test openvpn and it is working in my testing.
-Fractal
Back to top