I am stuck after flashing redboot. I am not able to telnet to port 9000 after flashing redboot. I downloaded the redboot from the link mentioned in the instructions page. Is there a newer version I need to use?
I have tried both LAN and WAN ports after flashing..but just cant get the 9000 port.
The power button is green and WAN ethernet is blinking green. The router also sets the internet light to amber but I can't even ping 192.168.1.1 when plugged into WAN port. I would really appreciate any help you guys can offer. Thanks in advance.
C:\Python26>python.exe jungo-image.py -d -p password1 192.168.1.1
Dumping flash contents (8MB) to MI424-WR-001801332314.bin
99%
C:\Python26>python.exe jungo-image.py -p password1 192.168.1.1 rb-mi424wr-ROM.bi
n
Unlocking flash...
Writing new image...
load -u http://192.168.1.3:8080/rb-mi424wr-ROM.bin -r 0
Flash update complete!
C:\Python26>telnet 192.168.1.1 9000
Connecting To 192.168.1.1...Could not open connection to the host, on port 9000:
Connect failed
C:\Python26>telnet 192.168.1.1 9000
Connecting To 192.168.1.1...Could not open connection to the host, on port 9000:
Connect failed
C:\Python26>
Last edited by Nixer on Mon Dec 10, 2012 4:34; edited 4 times in total
Posted: Mon Dec 10, 2012 4:33 Post subject: Solved!
I got it working after enabling/disabling WAN DHCP IP distribution. For some reasons, I wasn't able to connect to WAN port initially but enabling/disabling helped! I am still not sure what the issue was.
I was able to proceed after that and have a clean running environment configured in Client-Bridge mode.
