cristic DD-WRT Novice
Joined: 17 Apr 2013 Posts: 2
|
Posted: Wed Apr 17, 2013 11:11 Post subject: Ubiquiti Loco M2 |
|
Hi,
I have Ubiquiti Loco M2 flashed with DD-WRT v24-sp2 (07/20/12) std , setup for internal domain network and all my lap tops can reach the signal very well and they can connect to the network, the problem is on the Windows Mobile Devices Motorola MC9590 (KB0DAB00100)- Windows Mobile 6.5 they can reach the signal but can't connect to the network, I'm thinkig loudly maybe the reason is the "SuperChannelFeature which is not activated and the Devices are working on:
Radio Spec:
Wideband - 2.4GHz - systems;
Broadband Radio Access - 5GHz;
Short Range Devices - 1-40GHz;
Tri-mode IEEE® 802.11a/b/g;
Frequency Band: HSDPA: 850, 900, 1800,1900, and 2100 MHz
EVDO Rev A: 850 and 1900 MHz;
Security: WPA2 (Personal or Enterprise); 802.1x; EAP-TLS;
TTLS (CHAP, MS-CHAP, MS-CHAPv2, PAP or
MD5); PEAP (TLS, MSCHAPv2, EAP-GTC); LEAP,
EAP-FAST (TLS, MS-CHAPv2, EAP-GTC); CCXv4
certified; support for IPv6; FIPS 140-2 Certified
I will be very helpful for any solution,
Thanks in Advance |
|
cristic DD-WRT Novice
Joined: 17 Apr 2013 Posts: 2
|
Posted: Thu Apr 18, 2013 6:29 Post subject: RE- |
|
Hi,
My Firmware Version is DD-WRT v24-sp2 (07/20/12) std - build 19519,
Not sure if upgrade will help because i have Lynksys WRT54G Router with the same Firmware Version and from here i can connect to my network with the Motorola Devices..
I'm wondering if there is a trial key for SupperChannelFeature to activate this option and see what happen,
Thanks... |
|