Posted: Fri Mar 16, 2012 11:04 Post subject: Re: Support for new Belkin Products 11/15/11
Hi all!
I have belkin N600db and try flash many dd-wrt firmware brainslayer, v24-k26, from webflash and mini cfe server but not working. I flash the original belkin fw from mini cfe server and my router working again with original fw. Please send me, flash procedure and what fw required for the N600DB. Sorry my english.
Thanks!
What else would be needed to build the firmware for this device? Is there a guide to building fw for new devices that I can reference in order to try to gather required info/code to facilitate development?
v1 is broadcom based
v2 is ralink based
v3 is broadcom based
and all of them only have 100 mbit. not very powerfull, huh. better switch to tp-link wdr4300 _________________ RT-N66U @ Build 25697M K3.10.63
TL-WR842ND v1 @ BS-build 23919 WDS AP
TL-WR841ND @ BS-build 23919 WDS Client
TL-WR841ND @ BS-build 23919 Client Bridge ( Routed )
Posted: Fri Apr 26, 2013 5:05 Post subject: f9k1105V3
Any word on the status of this router? I have searched the Supported Devices wiki and the Known incompatible devices wiki. This device is listed in neither. I have however seen that the f9k1101v1, f9k1102v1 and f9k1102v2 are listed on the Incompatible device list. Sorry for bringing up on old topic. Thank you in advance.
P.s. If it helps, the FCC ID is: K7SF9K1105V3. Again, thank you.
if that router has a serial port, connect a serial adapter to it and dump the output.
I'm wondering how this is done, f9k1102v1 has USB and RJ ports on the back, no d-subs. If telnet can be used, I'm ok with command line stuff, so most any suggestions to help me dump data would be appreciated.
guess he was talking about the Ethernet connection.
Quote:
I'm wondering how this is done, f9k1102v1 has USB and RJ ports on the back, no d-subs. If telnet can be used, I'm ok with command line stuff, so most any suggestions to help me dump data would be appreciated.
there is still nothing available for this device..
UPDATE: The CFE MiniWEB server works on the F9J1102.
This would be a great router with dd-wrt on it.