[Fiero]

I have a TP-Link WDR3600 running the 04-24 release v24 PreSP2 (build 21061).

I've been playing with many dd-wrt configurations over the course of the last 3 weeks. Today I reverted to default settings using the web GUI then set the 2.4 GHZ antenna to AP mode and am using the 5.0 GHZ antenna as a client to create a client bridge between two networks. I was monitoring traffic using the GUI for about an hour then suddenly I was unable to access the GUI. Error in chrome is: "Error 104 (net:: ERR_CONNECTION_FAILED)" I get the same error using a http and a https conenction

I'm also not able to log into the router with telnet or ssh. The error is "Network error: No buffer space available". At this point I conducted the 30/30/30 reset. The reset seems successful as the broadcasted SSID reverted to "dd-wrt". After the reset I am still unable to log into the device with ssh/telnet/http. The WDR3600 DHCP server is still working properly and assigning IP's to both wireless and wired connections.


Any suggestions to bring this router back to life?