Author
Message
Sash DD-WRT Guru Joined: 20 Sep 2006 Posts: 17619 Location: Hesse/Germany
Back to top
Sponsor
Sash DD-WRT Guru Joined: 20 Sep 2006 Posts: 17619 Location: Hesse/Germany
Back to top
LOM DD-WRT Guru Joined: 28 Dec 2008 Posts: 7647
Posted: Wed Nov 27, 2013 1:53 Post subject:
Sash wrote: cpu: ar9331
ram: zentel a3s56d40ftp 256mbit
flash: spansion s25fl032pif 32mbit
so its more like an WR703N or MR3020
If you are not faint-hearted then you can use the utility for header patching a few posts down in this thread:
https://forum.openwrt.org/viewtopic.php?id=36596 _________________ Kernel panic: Aiee, killing interrupt handler!
Back to top
Sash DD-WRT Guru Joined: 20 Sep 2006 Posts: 17619 Location: Hesse/Germany
Back to top
locobyte DD-WRT Novice Joined: 22 Apr 2013 Posts: 10
Posted: Thu Nov 28, 2013 21:59 Post subject:
any way to revert to tp-link firmware?the internal antenna seem doesn't work in client mode
Confirmed only works external antenna in all modes,please help
Back to top
danymarc DD-WRT Guru Joined: 04 Nov 2012 Posts: 525 Location: Acapulco, Mexico
Back to top
locobyte DD-WRT Novice Joined: 22 Apr 2013 Posts: 10
Posted: Fri Nov 29, 2013 2:36 Post subject:
Thanks but no luck,i'm on stock MR3020 but i can't flash WA7210 firmware,i'm getting this error.
Error code: 18005
Upgrade unsuccessfully because the version of the upgraded file was incorrect. Please check the file name.
I change the name but don't work
Back to top
danymarc DD-WRT Guru Joined: 04 Nov 2012 Posts: 525 Location: Acapulco, Mexico
Posted: Fri Nov 29, 2013 5:36 Post subject:
You have to revert before any, with file mr3020nv1_webrevert , did you
Back to top
locobyte DD-WRT Novice Joined: 22 Apr 2013 Posts: 10
Posted: Fri Nov 29, 2013 8:02 Post subject:
danymarc wrote: You have to revert before any, with file mr3020nv1_webrevert , did you
Yes i do and now i can't flash TL-WA7210 firmware
Back to top
danymarc DD-WRT Guru Joined: 04 Nov 2012 Posts: 525 Location: Acapulco, Mexico
Back to top
locobyte DD-WRT Novice Joined: 22 Apr 2013 Posts: 10
Posted: Fri Nov 29, 2013 17:43 Post subject:
No way,i've tried everything...
Back to top
locobyte DD-WRT Novice Joined: 22 Apr 2013 Posts: 10
Posted: Fri Nov 29, 2013 22:30 Post subject:
Yes!!finally i can revert to stock
Web revert with mr3020nv1_webrevert.bin
Trim the first 0x20200 bytes of wa7210nv2_en_3_16_5_up_boot(130320)
Edit 0x40 0x43 0x44 0x47 to 30200001 & 00000001 with the software of reply 7
https://forum.openwrt.org/viewtopic.php?id=36596
Upgrade by tp link interface and back to stock again
Back to top
locobyte DD-WRT Novice Joined: 22 Apr 2013 Posts: 10
Posted: Fri Dec 13, 2013 10:59 Post subject:
any news? It is a great device
Back to top
Sash DD-WRT Guru Joined: 20 Sep 2006 Posts: 17619 Location: Hesse/Germany
Back to top
locobyte DD-WRT Novice Joined: 22 Apr 2013 Posts: 10
Posted: Tue Dec 17, 2013 19:33 Post subject:
Sash wrote: someone has to find THe correct gpio Pins and setting for activatim THW internal antennas.
Thanks for your work and response,hope can fix soon
Back to top