22186 LAN/WAN problem still exists - DUMP included -

Post new topic   Reply to topic    DD-WRT Forum Index -> Ubiquiti Devices
Author Message
Fractal
DD-WRT Guru


Joined: 19 Apr 2010
Posts: 1243

PostPosted: Sat Aug 10, 2013 21:00    Post subject: 22186 LAN/WAN problem still exists - DUMP included - Reply with quote
here is a dump from a new rocket m2, running 22186.
same thing happens, I can use eth0 as WAN and ATH0 as LAN on build 18687, any build after that does this:

You can get a WAN IP, and when connecting a wireless client, the wireless client gets a IP from the dd-wrt dhcp server. However you cannot ping the LAN, or route to the internet.

WAN IP: 192.168.1.200
LAN IP: 192.168.180.1

so no conflicts...... here is the dmesg, and brctl show configs:

Code:
root@DD-WRT:~#
root@DD-WRT:~# brctl show
bridge name     bridge id               STP enabled     interfaces
br0             8000.000000000000       no              ath0
root@DD-WRT:~# dmesg
<5>[    0.000000] Linux version 3.10.6-rc1 (root@dd-wrt) (gcc version 4.8.1 (OpenWrt/Linaro GCC 4.8-2013.04 r36550) ) #472 Sat Aug 10 18:27:29 CEST 2013
<6>[    0.000000] bootconsole [early0] enabled
<6>[    0.000000] CPU revision is: 00019374 (MIPS 24Kc)
<6>[    0.000000] sys id = 101 Atheros AR7241 rev 1.1 (0x0101)
<6>[    0.000000] Determined physical RAM map:
<6>[    0.000000]  memory: 04000000 @ 00000000 (usable)
<4>[    0.000000] Zone ranges:
<4>[    0.000000]   Normal   [mem 0x00000000-0x03ffffff]
<4>[    0.000000] Movable zone start for each node
<4>[    0.000000] Early memory node ranges
<4>[    0.000000]   node   0: [mem 0x00000000-0x03ffffff]
<7>[    0.000000] On node 0 totalpages: 16384
<7>[    0.000000] free_area_init_node: node 0, pgdat 802ef0d0, node_mem_map 81000000
<7>[    0.000000]   Normal zone: 128 pages used for memmap
<7>[    0.000000]   Normal zone: 0 pages reserved
<7>[    0.000000]   Normal zone: 16384 pages, LIFO batch:3
<4>[    0.000000] Primary instruction cache 64kB, 4-way, VIPT, I-cache aliases, linesize 32 bytes.
<4>[    0.000000] Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes
<7>[    0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
<7>[    0.000000] pcpu-alloc: [0] 0
<4>[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 16256
<5>[    0.000000] Kernel command line: console=ttyS0,115200 root=1f02 rootfstype=squashfs noinitrd init=/sbin/init
<6>[    0.000000] PID hash table entries: 256 (order: -2, 1024 bytes)
<6>[    0.000000] Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
<6>[    0.000000] Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
<6>[    0.000000] Writing ErrCtl register=00000000
<6>[    0.000000] Readback ErrCtl register=00000000
<6>[    0.000000] Memory: 61424k/65536k available (2277k kernel code, 4112k reserved, 431k data, 168k init, 0k highmem)
<6>[    0.000000] NR_IRQS:80
<6>[    0.060000] Calibrating delay loop... 259.27 BogoMIPS (lpj=1296384)
<6>[    0.070000] pid_max: default: 32768 minimum: 301
<6>[    0.070000] Mount-cache hash table entries: 512
<6>[    0.080000] NET: Registered protocol family 16
<6>[    0.110000] found calibration data for slot 0 on 0xBF7F1000
<4>[    0.320000] registering PCI controller with io_map_base unset
<6>[    0.340000] bio: create slab <bio-0> at 0
<6>[    0.340000] PCI host bridge to bus 0000:00
<6>[    0.350000] pci_bus 0000:00: root bus resource [mem 0x10000000-0x13ffffff]
<6>[    0.350000] pci_bus 0000:00: root bus resource [io  0x0000]
<6>[    0.360000] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]
<7>[    0.360000] pci 0000:00:00.0: [168c:ff1c] type 00 class 0x020000
<6>[    0.360000] pci 0000:00:00.0: fixup device configuration
<0>[    0.370000] bootstrap returns device 168C:2A
<7>[    0.370000] pci 0000:00:00.0: reg 10: [mem 0x00000000-0x0000ffff 64bit]
<7>[    0.370000] pci 0000:00:00.0: supports D1
<7>[    0.370000] pci 0000:00:00.0: PME# supported from D0 D1 D3hot
<7>[    0.370000] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 00
<6>[    0.370000] pci 0000:00:00.0: BAR 0: assigned [mem 0x10000000-0x1000ffff 64bit]
<6>[    0.380000] PCI: mapping irq 72 to pin1@0000:00:00.0
<6>[    0.380000] Switching to clocksource MIPS
<6>[    0.390000] NET: Registered protocol family 2
<6>[    0.390000] TCP established hash table entries: 512 (order: 0, 4096 bytes)
<6>[    0.400000] TCP bind hash table entries: 512 (order: -1, 2048 bytes)
<6>[    0.410000] TCP: Hash tables configured (established 512 bind 512)
<6>[    0.410000] TCP: reno registered
<6>[    0.420000] UDP hash table entries: 256 (order: 0, 4096 bytes)
<6>[    0.420000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
<6>[    0.430000] NET: Registered protocol family 1
<7>[    0.430000] PCI: CLS 0 bytes, default 32
<5>[    0.430000] gpio_proc: module loaded and /proc/gpio/ created
<5>[    0.440000] wl0gpio_proc: module loaded and /proc/wl0gpio/ created
<6>[    0.450000] squashfs: version 3.0 (2006/03/15) Phillip Lougher
<6>[    0.450000] msgmni has been set to 119
<6>[    0.460000] io scheduler noop registered
<6>[    0.460000] io scheduler deadline registered (default)
<6>[    0.470000] Serial: 8250/16550 driver, 1 ports, IRQ sharing disabled
<6>[    0.500000] serial8250.0: ttyS0 at MMIO 0x18020000 (irq = 11) is a 16550A
<6>[    0.500000] console [ttyS0] enabled, bootconsole disabled
<0>[    0.520000] guessed flashsize = 8M
<0>[    0.520000] scanning for root partition
<0>[    0.520000] uboot detected
<0>[    0.530000] guessed bootloader size = 50000
<0>[    0.540000]
<0>[    0.540000] found squashfs at 140000
<5>[    0.540000] Creating 8 MTD partitions on "ar7240-nor0":
<5>[    0.550000] 0x000000000000-0x000000050000 : "RedBoot"
<5>[    0.550000] 0x000000050000-0x0000007e0000 : "linux"
<5>[    0.560000] 0x000000140000-0x000000730000 : "rootfs"
<5>[    0.570000] mtd: partition "rootfs" set to be root filesystem
<5>[    0.570000] 0x000000730000-0x0000007e0000 : "ddwrt"
<5>[    0.580000] 0x0000007e0000-0x0000007f0000 : "nvram"
<5>[    0.580000] 0x0000007f0000-0x000000800000 : "board_config"
<5>[    0.590000] 0x000000000000-0x000000800000 : "fullflash"
<5>[    0.600000] 0x000000000000-0x000000050000 : "fullboot"
<6>[    0.610000] tun: Universal TUN/TAP device driver, 1.6
<6>[    0.610000] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
<6>[    1.020000] PPP generic driver version 2.4.2
<6>[    1.020000] PPP BSD Compression module registered
<6>[    1.030000] PPP Deflate Compression module registered
<6>[    1.030000] PPP MPPE Compression module registered
<6>[    1.040000] NET: Registered protocol family 24
<6>[    1.060000] u32 classifier
<6>[    1.060000]     Performance counters on
<6>[    1.060000]     input device check on
<6>[    1.070000]     Actions configured
<6>[    1.070000] Netfilter messages via NETLINK v0.30.
<6>[    1.080000] nf_conntrack version 0.5.0 (959 buckets, 3836 max)
<4>[    1.080000] nf_conntrack_rtsp v0.6.21 loading
<4>[    1.090000] nf_nat_rtsp v0.6.21 loading
<6>[    1.090000] ip_tables: (C) 2000-2006 Netfilter Core Team
<6>[    1.100000] TCP: westwood registered
<6>[    1.100000] TCP: hybla registered
<6>[    1.100000] TCP: vegas registered
<6>[    1.110000] NET: Registered protocol family 17
<5>[    1.110000] Bridge firewalling registered
<6>[    1.120000] 8021q: 802.1Q VLAN Support v1.8
<6>[    1.120000] searching for nvram
<6>[    1.130000] nvram size = 0
<6>[    1.160000] Atheros AR71xx hardware watchdog driver version 0.1.0
<6>[    1.160000] ar71xx-wdt: timeout=15 secs (max=22) ref freq=195000000
<6>[    1.180000] VFS: Mounted root (squashfs filesystem) readonly on device 31:2.
<6>[    1.190000] Freeing unused kernel memory: 168K (80306000 - 80330000)
<7>[    5.390000] ar71xx-wdt: enabling watchdog timer
<6>[    5.570000] libphy: ag71xx_mdio: probed
<6>[    5.570000] eth0: Atheros AG71xx at 0xb9000000, irq 4, mode:MII
<6>[    6.130000] ag71xx ag71xx.0 eth0: connected to PHY at ag71xx-mdio.1:04 [uid=004dd041, driver=Generic PHY]
<6>[    6.140000] eth1: Atheros AG71xx at 0xba000000, irq 5, mode:GMII
<6>[    6.690000] eth1: Found an AR7240/AR9330 built-in switch
<6>[   10.310000] Loading modules backported from Linux version master-2013-06-27-0-gdcfa6d5
<6>[   10.320000] Backport generated by backports.git backports-20130617-4-ge3220f5
<6>[   10.520000] cfg80211: Calling CRDA to update world regulatory domain
<6>[   10.530000] cfg80211: World regulatory domain updated:
<6>[   10.530000] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
<6>[   10.540000] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
<6>[   10.550000] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
<6>[   10.560000] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
<6>[   10.560000] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
<6>[   10.570000] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
<6>[   11.140000] eth0: link up (100Mbps/Full duplex)
<7>[   11.240000] ath: EEPROM regdomain: 0x2a
<7>[   11.240000] ath: EEPROM indicates we should expect a direct regpair map
<7>[   11.240000] ath: Country alpha2 being used: US
<7>[   11.240000] ath: Regpair used: 0x2a
<7>[   11.260000] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
<6>[   11.260000] ieee80211 phy0: Atheros AR9280 Rev:2 mem=0xb0000000, irq=72
<6>[   11.270000] cfg80211: Calling CRDA for country: US
<6>[   11.280000] cfg80211: Regulatory domain changed to country: US
<6>[   11.280000] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
<6>[   11.290000] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
<6>[   11.300000] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
<6>[   11.310000] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
<6>[   11.320000] cfg80211:   (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
<6>[   11.320000] cfg80211:   (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
<6>[   11.330000] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
<6>[   11.340000] cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 4000 mBm)
<6>[   14.590000] cfg80211: Calling CRDA to update world regulatory domain
<6>[   14.600000] cfg80211: World regulatory domain updated:
<6>[   14.600000] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
<6>[   14.610000] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
<6>[   14.620000] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
<6>[   14.630000] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
<6>[   14.630000] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
<6>[   14.640000] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
<6>[   14.680000] cfg80211: Calling CRDA for country: US
<6>[   14.680000] cfg80211: Regulatory domain changed to country: US
<6>[   14.690000] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
<6>[   14.700000] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
<6>[   14.700000] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
<6>[   14.710000] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
<6>[   14.720000] cfg80211:   (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
<6>[   14.730000] cfg80211:   (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
<6>[   14.740000] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
<6>[   14.740000] cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 4000 mBm)
<6>[   18.830000] device ath0 entered promiscuous mode
<6>[   18.830000] br0: port 1(ath0) entered forwarding state
<6>[   18.840000] br0: port 1(ath0) entered forwarding state
<6>[   22.300000] xt_CT: netfilter: NOTRACK target is deprecated, use CT instead or upgrade iptables
<6>[   22.910000] device eth0 entered promiscuous mode
<6>[   22.930000] eth0: link down
<6>[   22.960000] device eth0 left promiscuous mode
<6>[   23.170000] eth0: link up (100Mbps/Full duplex)
<6>[   33.880000] br0: port 1(ath0) entered forwarding state
<6>[  122.960000] eth0: link down
<6>[  123.030000] br0: port 1(ath0) entered disabled state
<6>[  123.040000] device ath0 left promiscuous mode
<6>[  123.050000] br0: port 1(ath0) entered disabled state
<6>[  130.740000] cfg80211: Calling CRDA to update world regulatory domain
<6>[  130.750000] cfg80211: World regulatory domain updated:
<6>[  130.750000] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
<6>[  130.760000] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
<6>[  130.770000] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
<6>[  130.780000] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
<6>[  130.790000] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
<6>[  130.790000] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
<6>[  130.810000] cfg80211: Calling CRDA for country: US
<6>[  130.820000] cfg80211: Regulatory domain changed to country: US
<6>[  130.830000] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
<6>[  130.830000] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
<6>[  130.840000] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
<6>[  130.850000] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
<6>[  130.860000] cfg80211:   (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
<6>[  130.870000] cfg80211:   (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
<6>[  130.870000] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
<6>[  130.880000] cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 4000 mBm)
<6>[  134.560000] device ath0 entered promiscuous mode
<6>[  134.560000] br0: port 1(ath0) entered forwarding state
<6>[  134.570000] br0: port 1(ath0) entered forwarding state
<6>[  139.030000] device eth0 entered promiscuous mode
<6>[  139.070000] device eth0 left promiscuous mode
<6>[  139.220000] eth0: link up (100Mbps/Full duplex)
<6>[  149.600000] br0: port 1(ath0) entered forwarding state
root@DD-WRT:~# ifconfig
ath0      Link encap:Ethernet  HWaddr DC:9F:DB:XX:XX:XX
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:10 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:0 (0.0 B)  TX bytes:912 (912.0 B)

br0       Link encap:Ethernet  HWaddr CA:66:CE:8D:XX:XX
          inet addr:192.168.180.1  Bcast:192.168.180.255  Mask:255.255.255.0
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:30 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:0 (0.0 B)  TX bytes:1572 (1.5 KiB)

br0:0     Link encap:Ethernet  HWaddr CA:66:CE:8D:XX:XX
          inet addr:169.254.255.1  Bcast:169.254.255.255  Mask:255.255.0.0
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1

eth0      Link encap:Ethernet  HWaddr DC:9F:DB:XX:XX:XX 
          inet addr:192.168.1.200  Bcast:192.168.1.255  Mask:255.255.255.0
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:1429 errors:0 dropped:0 overruns:0 frame:0
          TX packets:2122 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:120273 (117.4 KiB)  TX bytes:2083747 (1.9 MiB)
          Interrupt:4

eth1      Link encap:Ethernet  HWaddr DC:9F:DB:XX:XX:XX 
          UP BROADCAST MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)
          Interrupt:5

lo        Link encap:Local Loopback 
          inet addr:127.0.0.1  Mask:255.0.0.0
          UP LOOPBACK RUNNING MULTICAST  MTU:65536  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)
[/quote]
Sponsor
Sash
DD-WRT Guru


Joined: 20 Sep 2006
Posts: 17619
Location: Hesse/Germany

PostPosted: Sat Oct 05, 2013 9:53    Post subject: Reply with quote
this is another topic on the same problem....opening again and again a topic on the same problem might reault in beeing ignored....by the dev
_________________
Forum Guidelines...How to get help
&
Forum Rules
&
RTFM/STFW
&
Throw some buzzwords into the WIKI search Exclamation
_________________
I'm NOT rude, just offer pure facts!
_________________
Atheros (TP-Link & Clones, etc ) debrick service in EU
_________________
Guide on HowTo be Safe, Secure and Protect Your Online Anonymity!
roln
DD-WRT Novice


Joined: 30 Apr 2012
Posts: 34

PostPosted: Thu Nov 28, 2013 2:55    Post subject: Reply with quote
Ok so let me get this straight...

You -- DDWRT release a new flash

We -- the community test this flash to see if you have fixed a bug in the flash that has been present since Build 18687.

You -- get offended when we report that the bug has not been fixed.

This is so sad.. it is actually funny Smile
Sash
DD-WRT Guru


Joined: 20 Sep 2006
Posts: 17619
Location: Hesse/Germany

PostPosted: Thu Nov 28, 2013 8:08    Post subject: Reply with quote
i personaly dont care on this problem. i dont use this device.
this was just a tip how to handle the problem, and as you can see i am right.....

_________________
Forum Guidelines...How to get help
&
Forum Rules
&
RTFM/STFW
&
Throw some buzzwords into the WIKI search Exclamation
_________________
I'm NOT rude, just offer pure facts!
_________________
Atheros (TP-Link & Clones, etc ) debrick service in EU
_________________
Guide on HowTo be Safe, Secure and Protect Your Online Anonymity!
Fractal
DD-WRT Guru


Joined: 19 Apr 2010
Posts: 1243

PostPosted: Wed Jan 08, 2014 17:40    Post subject: Reply with quote
This issue seems to be corrected as of 23069 build.

I have WIFI - LAN and WAN working together.

Kernel 3.10.24-rc1

12/11/13

I will try builds above this, however this build is working.

-Fractal
Display posts from previous:    Page 1 of 1
Post new topic   Reply to topic    DD-WRT Forum Index -> Ubiquiti Devices All times are GMT

Navigation

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You cannot download files in this forum