PicoStation M2 HP "B Version"

Post new topic   Reply to topic    DD-WRT Forum Index -> Ubiquiti Devices
View previous topic :: View next topic  
Author Message
enrico1301
DD-WRT Novice


Joined: 16 Jun 2006
Posts: 44
PostPosted: Sun May 20, 2012 20:09    Post subject: PicoStation M2 HP "B Version" Reply with quote
Hi,

i have two picostation
FCC ID: SWX-M2
FCC ID :SWX-M2B

on M2 version ddwrt runs well but on M2B i can't use wan interface, ex. configure as dhcp client.
i have used latest beta.

also
can't install the 14896 rev. on M2B, on M2 rus properly.

Enrico
Back to top View user's profile Send private message
Sponsor
Sash
DD-WRT Guru


Joined: 20 Sep 2006
Posts: 17619
Location: Hesse/Germany
PostPosted: Sun May 20, 2012 21:12    Post subject: Reply with quote
Code:
dmesg
?
_________________
Forum Guidelines...How to get help
&
Forum Rules
&
RTFM/STFW
&
Throw some buzzwords into the WIKI search Exclamation
_________________
I'm NOT rude, just offer pure facts!
_________________
Atheros (TP-Link & Clones, etc ) debrick service in EU
_________________
Guide on HowTo be Safe, Secure and Protect Your Online Anonymity!
Back to top View user's profile Send private message
enrico1301
DD-WRT Novice


Joined: 16 Jun 2006
Posts: 44
PostPosted: Tue May 22, 2012 15:26    Post subject: Reply with quote
root@DD-WRT:~# dmesg
<5>[ 0.000000] Linux version 3.2.12-rc1-svn18774 (root@dd-wrt) (gcc version 4.6.3 20120201 (prerelease) (Linaro GCC 4.6-2012.02) ) #1464 Mon Mar 19 09:05:06 CET 2012
<4>[ 0.000000] flash_size passed from bootloader = 0
<6>[ 0.000000] bootconsole [early0] enabled
<6>[ 0.000000] CPU revision is: 00019374 (MIPS 24Kc)
<6>[ 0.000000] Determined physical RAM map:
<6>[ 0.000000] memory: 02000000 @ 00000000 (usable)
<4>[ 0.000000] Zone PFN ranges:
<4>[ 0.000000] Normal 0x00000000 -> 0x00002000
<4>[ 0.000000] Movable zone start PFN for each node
<4>[ 0.000000] early_node_map[1] active PFN ranges
<4>[ 0.000000] 0: 0x00000000 -> 0x00002000
<7>[ 0.000000] On node 0 totalpages: 8192
<7>[ 0.000000] free_area_init_node: node 0, pgdat 802f70b0, node_mem_map 81000000
<7>[ 0.000000] Normal zone: 64 pages used for memmap
<7>[ 0.000000] Normal zone: 0 pages reserved
<7>[ 0.000000] Normal zone: 8128 pages, LIFO batch:0
<7>[ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
<7>[ 0.000000] pcpu-alloc: [0] 0
<4>[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 8128
<5>[ 0.000000] Kernel command line: console=ttyS0,115200 root=1f02 rootfstype=squashfs noinitrd init=/sbin/init
<6>[ 0.000000] PID hash table entries: 128 (order: -3, 512 bytes)
<6>[ 0.000000] Dentry cache hash table entries: 4096 (order: 2, 16384 bytes)
<6>[ 0.000000] Inode-cache hash table entries: 2048 (order: 1, 8192 bytes)
<4>[ 0.000000] Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes.
<4>[ 0.000000] Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes
<6>[ 0.000000] Writing ErrCtl register=00000000
<6>[ 0.000000] Readback ErrCtl register=00000000
<6>[ 0.000000] Memory: 28968k/32768k available (2375k kernel code, 3800k reserved, 654k data, 168k init, 0k highmem)
<6>[ 0.000000] NR_IRQS:80
<6>[ 0.000000] Calibrating delay loop... 259.27 BogoMIPS (lpj=1296384)
<6>[ 0.070000] pid_max: default: 32768 minimum: 301
<6>[ 0.070000] Mount-cache hash table entries: 512
<6>[ 0.080000] NET: Registered protocol family 16
<6>[ 0.110000] found calibration data for slot 0 on 0xBF7F1000
<4>[ 0.320000] registering PCI controller with io_map_base unset
<6>[ 0.340000] bio: create slab <bio-0> at 0
<5>[ 0.350000] SCSI subsystem initialized
<6>[ 0.350000] usbcore: registered new interface driver usbfs
<6>[ 0.360000] usbcore: registered new interface driver hub
<6>[ 0.360000] usbcore: registered new device driver usb
<7>[ 0.370000] pci 0000:00:00.0: [168c:ff1c] type 0 class 0x000200
<6>[ 0.370000] pci 0000:00:00.0: fixup device configuration
<0>[ 0.370000] bootstrap returns device 168C:2A
<7>[ 0.380000] pci 0000:00:00.0: reg 10: [mem 0x00000000-0x0000ffff 64bit]
<7>[ 0.380000] pci 0000:00:00.0: supports D1
<7>[ 0.380000] pci 0000:00:00.0: PME# supported from D0 D1 D3hot
<7>[ 0.380000] pci 0000:00:00.0: PME# disabled
<6>[ 0.380000] pci 0000:00:00.0: BAR 0: assigned [mem 0x10000000-0x1000ffff 64bit]
<6>[ 0.380000] pci 0000:00:00.0: BAR 0: set to [mem 0x10000000-0x1000ffff 64bit] (PCI address [0x10000000-0x1000ffff])
<6>[ 0.390000] PCI: mapping irq 72 to pin1@0000:00:00.0
<6>[ 0.390000] Switching to clocksource MIPS
<6>[ 0.400000] NET: Registered protocol family 2
<6>[ 0.400000] IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
<6>[ 0.410000] TCP established hash table entries: 1024 (order: 1, 8192 bytes)
<6>[ 0.420000] TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
<6>[ 0.420000] TCP: Hash tables configured (established 1024 bind 1024)
<6>[ 0.430000] TCP reno registered
<6>[ 0.430000] UDP hash table entries: 256 (order: 0, 4096 bytes)
<6>[ 0.440000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
<6>[ 0.450000] NET: Registered protocol family 1
<7>[ 0.450000] PCI: CLS 0 bytes, default 32
<5>[ 0.450000] gpio_proc: module loaded and /proc/gpio/ created
<5>[ 0.460000] wl0gpio_proc: module loaded and /proc/wl0gpio/ created
<6>[ 0.470000] squashfs: version 3.0 (2006/03/15) Phillip Lougher
<6>[ 0.470000] msgmni has been set to 56
<6>[ 0.480000] io scheduler noop registered
<6>[ 0.480000] io scheduler deadline registered (default)
<6>[ 0.490000] Serial: 8250/16550 driver, 1 ports, IRQ sharing disabled
<6>[ 0.510000] serial8250.0: ttyS0 at MMIO 0x18020000 (irq = 11) is a 16550A
<6>[ 0.520000] console [ttyS0] enabled, bootconsole disabled
<0>[ 0.530000] guessed flashsize = 8M
<0>[ 0.540000] scanning for root partition
<0>[ 0.540000] uboot detected
<0>[ 0.540000] guessed bootloader size = 50000
<0>[ 0.550000]
<0>[ 0.550000] found squashfs at 15F000
<5>[ 0.560000] Creating 8 MTD partitions on "ar7240-nor0":
<5>[ 0.560000] 0x000000000000-0x000000050000 : "RedBoot"
<5>[ 0.570000] 0x000000050000-0x0000007e0000 : "linux"
<5>[ 0.580000] 0x00000015f000-0x000000750000 : "rootfs"
<4>[ 0.580000] mtd: partition "rootfs" must either start or end on erase block boundary or be smaller than an erase block -- forcing read-only
<5>[ 0.600000] mtd: partition "rootfs" set to be root filesystem
<5>[ 0.600000] 0x000000750000-0x0000007e0000 : "ddwrt"
<5>[ 0.610000] 0x0000007e0000-0x0000007f0000 : "nvram"
<5>[ 0.610000] 0x0000007f0000-0x000000800000 : "board_config"
<5>[ 0.620000] 0x000000000000-0x000000800000 : "fullflash"
<5>[ 0.630000] 0x000000000000-0x000000050000 : "fullboot"
<6>[ 0.640000] tun: Universal TUN/TAP device driver, 1.6
<6>[ 0.640000] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
<6>[ 1.050000] PPP generic driver version 2.4.2
<6>[ 1.050000] PPP BSD Compression module registered
<6>[ 1.060000] PPP Deflate Compression module registered
<6>[ 1.060000] PPP MPPE Compression module registered
<6>[ 1.070000] NET: Registered protocol family 24
<6>[ 1.070000] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
<6>[ 1.080000] Initializing USB Mass Storage driver...
<6>[ 1.090000] usbcore: registered new interface driver usb-storage
<6>[ 1.090000] USB Mass Storage support registered.
<6>[ 1.100000] Software Watchdog Timer: 0.07 initialized. soft_noboot=0 soft_margin=60 sec soft_panic=0 (nowayout= 0)
<7>[ 1.110000] Registered led device: generic_0
<7>[ 1.110000] Registered led device: generic_1
<7>[ 1.110000] Registered led device: generic_2
<7>[ 1.110000] Registered led device: generic_3
<7>[ 1.110000] Registered led device: generic_4
<7>[ 1.110000] Registered led device: generic_5
<7>[ 1.110000] Registered led device: generic_6
<7>[ 1.110000] Registered led device: generic_7
<7>[ 1.110000] Registered led device: generic_8
<7>[ 1.110000] Registered led device: generic_9
<7>[ 1.110000] Registered led device: generic_10
<7>[ 1.110000] Registered led device: generic_11
<7>[ 1.110000] Registered led device: generic_12
<7>[ 1.110000] Registered led device: generic_13
<7>[ 1.110000] Registered led device: generic_14
<7>[ 1.110000] Registered led device: generic_15
<7>[ 1.110000] Registered led device: generic_16
<7>[ 1.110000] Registered led device: generic_17
<7>[ 1.110000] Registered led device: generic_18
<7>[ 1.110000] Registered led device: generic_19
<7>[ 1.110000] Registered led device: generic_20
<7>[ 1.110000] Registered led device: generic_21
<7>[ 1.110000] Registered led device: generic_22
<7>[ 1.110000] Registered led device: generic_23
<7>[ 1.120000] Registered led device: generic_24
<7>[ 1.120000] Registered led device: generic_25
<7>[ 1.120000] Registered led device: generic_26
<7>[ 1.120000] Registered led device: generic_27
<7>[ 1.120000] Registered led device: generic_28
<7>[ 1.120000] Registered led device: generic_29
<7>[ 1.120000] Registered led device: generic_30
<7>[ 1.120000] Registered led device: generic_31
<7>[ 1.120000] Registered led device: wireless_generic_0
<7>[ 1.120000] Registered led device: wireless_generic_1
<7>[ 1.120000] Registered led device: wireless_generic_2
<7>[ 1.120000] Registered led device: wireless_generic_3
<7>[ 1.120000] Registered led device: wireless_generic_4
<7>[ 1.120000] Registered led device: wireless_generic_5
<7>[ 1.120000] Registered led device: wireless_generic_6
<7>[ 1.120000] Registered led device: wireless_generic_7
<7>[ 1.120000] Registered led device: wireless_generic_8
<7>[ 1.120000] Registered led device: wireless_generic_9
<7>[ 1.120000] Registered led device: wireless_generic_10
<7>[ 1.120000] Registered led device: wireless_generic_11
<7>[ 1.120000] Registered led device: wireless_generic_12
<7>[ 1.120000] Registered led device: wireless_generic_13
<7>[ 1.120000] Registered led device: wireless_generic_14
<7>[ 1.120000] Registered led device: wireless_generic_15
<6>[ 1.120000] u32 classifier
<6>[ 1.130000] input device check on
<6>[ 1.130000] Actions configured
<6>[ 1.130000] Netfilter messages via NETLINK v0.30.
<6>[ 1.140000] nf_conntrack version 0.5.0 (452 buckets, 1808 max)
<4>[ 1.140000] nf_conntrack_rtsp v0.6.21 loading
<4>[ 1.150000] nf_nat_rtsp v0.6.21 loading
<6>[ 1.150000] ip_tables: (C) 2000-2006 Netfilter Core Team
<6>[ 1.160000] IPP2P v0.8.2 loading
<6>[ 1.160000] TCP westwood registered
<6>[ 1.170000] TCP hybla registered
<6>[ 1.170000] TCP vegas registered
<6>[ 1.170000] NET: Registered protocol family 17
<6>[ 1.180000] 8021q: 802.1Q VLAN Support v1.8
<6>[ 1.180000] searching for nvram
<6>[ 1.180000] nvram size = 0
<0>[ 1.210000] Broken NVRAM found, recovering it (Magic FFFFFFFF)
<6>[ 1.230000] VFS: Mounted root (squashfs filesystem) readonly on device 31:2.
<6>[ 1.240000] Freeing unused kernel memory: 168k freed
<6>[ 4.440000] ag71xx_mdio: probed
<6>[ 4.440000] eth0: Atheros AG71xx at 0xb9000000, irq 4
<7>[ 5.340000] eth0: connected to PHY at ag71xx-mdio.1:04 [uid=004dd041, driver=Generic PHY]
<6>[ 5.340000] eth1: Atheros AG71xx at 0xba000000, irq 5
<6>[ 5.930000] eth1: Found an AR7240/AR9330 built-in switch
<6>[ 6.230000] Compat-wireless backport release: compat-wireless-2012-02-23-9-g3e5b1f0
<6>[ 6.240000] Backport based on wireless-testing.git master-2012-02-27
<6>[ 6.410000] cfg80211: Calling CRDA to update world regulatory domain
<6>[ 6.800000] cfg80211: World regulatory domain updated:
<6>[ 6.800000] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
<6>[ 6.810000] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
<6>[ 6.820000] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
<6>[ 6.830000] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
<6>[ 6.830000] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
<6>[ 6.840000] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
<7>[ 7.220000] PCI: Setting latency timer of device 0000:00:00.0 to 64
<7>[ 7.230000] ath: EEPROM regdomain: 0x0
<7>[ 7.230000] ath: EEPROM indicates default country code should be used
<7>[ 7.230000] ath: doing EEPROM country->regdmn map search
<7>[ 7.230000] ath: country maps to regdmn code: 0x3a
<7>[ 7.230000] ath: Country alpha2 being used: US
<7>[ 7.230000] ath: Regpair used: 0x3a
<7>[ 7.240000] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
<7>[ 7.240000] Registered led device: ath9k-phy0
<6>[ 7.240000] ieee80211 phy0: Atheros AR9280 Rev:2 mem=0xb0000000, irq=72
<6>[ 7.250000] cfg80211: Calling CRDA for country: US
<6>[ 7.370000] cfg80211: Regulatory domain changed to country: US
<6>[ 7.370000] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
<6>[ 7.380000] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
<6>[ 7.390000] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
<6>[ 7.400000] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
<6>[ 7.410000] cfg80211: (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
<6>[ 7.410000] cfg80211: (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
<6>[ 7.420000] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
<6>[ 9.100000] eth0: link up (100Mbps/Full duplex)
<6>[ 10.410000] eth0: link down
<6>[ 10.450000] device eth0 entered promiscuous mode
<6>[ 10.540000] cfg80211: Calling CRDA to update world regulatory domain
<6>[ 10.570000] cfg80211: World regulatory domain updated:
<6>[ 10.570000] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
<6>[ 10.580000] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
<6>[ 10.590000] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
<6>[ 10.600000] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
<6>[ 10.600000] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
<6>[ 10.610000] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
<6>[ 10.620000] cfg80211: Calling CRDA for country: US
<6>[ 10.640000] cfg80211: Regulatory domain changed to country: US
<6>[ 10.650000] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
<6>[ 10.660000] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
<6>[ 10.660000] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
<6>[ 10.670000] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
<6>[ 10.680000] cfg80211: (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
<6>[ 10.690000] cfg80211: (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
<6>[ 10.690000] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
<6>[ 11.280000] eth0: link up (100Mbps/Full duplex)
<6>[ 11.280000] br0: port 1(eth0) entering forwarding state
<6>[ 11.290000] br0: port 1(eth0) entering forwarding state
<6>[ 18.190000] device ath0 entered promiscuous mode
<6>[ 18.200000] br0: port 2(ath0) entering forwarding state
<6>[ 18.200000] br0: port 2(ath0) entering forwarding state
<6>[ 26.320000] br0: port 1(eth0) entering forwarding state
<6>[ 33.240000] br0: port 2(ath0) entering forwarding state
root@DD-WRT:~#
Back to top View user's profile Send private message
Sash
DD-WRT Guru


Joined: 20 Sep 2006
Posts: 17619
Location: Hesse/Germany
PostPosted: Tue May 22, 2012 20:00    Post subject: Reply with quote
try this build
_________________
Forum Guidelines...How to get help
&
Forum Rules
&
RTFM/STFW
&
Throw some buzzwords into the WIKI search Exclamation
_________________
I'm NOT rude, just offer pure facts!
_________________
Atheros (TP-Link & Clones, etc ) debrick service in EU
_________________
Guide on HowTo be Safe, Secure and Protect Your Online Anonymity!
Back to top View user's profile Send private message
enrico1301
DD-WRT Novice


Joined: 16 Jun 2006
Posts: 44
PostPosted: Thu May 24, 2012 14:23    Post subject: Reply with quote
same result.

dmesg after update:

dmesg
00000] 0: 0x00000000 -> 0x00002000
<7>[ 0.000000] On node 0 totalpages: 8192
<7>[ 0.000000] free_area_init_node: node 0, pgdat 802fb280, node_mem_map 81000000
<7>[ 0.000000] Normal zone: 64 pages used for memmap
<7>[ 0.000000] Normal zone: 0 pages reserved
<7>[ 0.000000] Normal zone: 8128 pages, LIFO batch:0
<7>[ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
<7>[ 0.000000] pcpu-alloc: [0] 0
<4>[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 8128
<5>[ 0.000000] Kernel command line: console=ttyS0,115200 root=1f02 rootfstype=squashfs noinitrd init=/sbin/init
<6>[ 0.000000] PID hash table entries: 128 (order: -3, 512 bytes)
<6>[ 0.000000] Dentry cache hash table entries: 4096 (order: 2, 16384 bytes)
<6>[ 0.000000] Inode-cache hash table entries: 2048 (order: 1, 8192 bytes)
<4>[ 0.000000] Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes.
<4>[ 0.000000] Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes
<6>[ 0.000000] Writing ErrCtl register=00000000
<6>[ 0.000000] Readback ErrCtl register=00000000
<6>[ 0.000000] Memory: 28952k/32768k available (2388k kernel code, 3816k reserved, 658k data, 168k init, 0k highmem)
<6>[ 0.000000] NR_IRQS:80
<6>[ 0.000000] Calibrating delay loop... 259.27 BogoMIPS (lpj=1296384)
<6>[ 0.070000] pid_max: default: 32768 minimum: 301
<6>[ 0.070000] Mount-cache hash table entries: 512
<6>[ 0.080000] NET: Registered protocol family 16
<6>[ 0.110000] found calibration data for slot 0 on 0xBF7F1000
<4>[ 0.320000] registering PCI controller with io_map_base unset
<6>[ 0.340000] bio: create slab <bio-0> at 0
<5>[ 0.350000] SCSI subsystem initialized
<6>[ 0.350000] usbcore: registered new interface driver usbfs
<6>[ 0.360000] usbcore: registered new interface driver hub
<6>[ 0.360000] usbcore: registered new device driver usb
<7>[ 0.370000] pci 0000:00:00.0: [168c:ff1c] type 0 class 0x000200
<6>[ 0.370000] pci 0000:00:00.0: fixup device configuration
<0>[ 0.370000] bootstrap returns device 168C:2A
<7>[ 0.380000] pci 0000:00:00.0: reg 10: [mem 0x00000000-0x0000ffff 64bit]
<7>[ 0.380000] pci 0000:00:00.0: supports D1
<7>[ 0.380000] pci 0000:00:00.0: PME# supported from D0 D1 D3hot
<7>[ 0.380000] pci 0000:00:00.0: PME# disabled
<6>[ 0.380000] pci 0000:00:00.0: BAR 0: assigned [mem 0x10000000-0x1000ffff 64bit]
<6>[ 0.380000] pci 0000:00:00.0: BAR 0: set to [mem 0x10000000-0x1000ffff 64bit] (PCI address [0x10000000-0x1000ffff])
<6>[ 0.390000] PCI: mapping irq 72 to pin1@0000:00:00.0
<6>[ 0.390000] Switching to clocksource MIPS
<6>[ 0.400000] NET: Registered protocol family 2
<6>[ 0.400000] IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
<6>[ 0.410000] TCP established hash table entries: 1024 (order: 1, 8192 bytes)
<6>[ 0.420000] TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
<6>[ 0.420000] TCP: Hash tables configured (established 1024 bind 1024)
<6>[ 0.430000] TCP reno registered
<6>[ 0.430000] UDP hash table entries: 256 (order: 0, 4096 bytes)
<6>[ 0.440000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
<6>[ 0.450000] NET: Registered protocol family 1
<7>[ 0.450000] PCI: CLS 0 bytes, default 32
<5>[ 0.450000] gpio_proc: module loaded and /proc/gpio/ created
<5>[ 0.460000] wl0gpio_proc: module loaded and /proc/wl0gpio/ created
<6>[ 0.470000] squashfs: version 3.0 (2006/03/15) Phillip Lougher
<6>[ 0.470000] msgmni has been set to 56
<6>[ 0.480000] io scheduler noop registered
<6>[ 0.480000] io scheduler deadline registered (default)
<6>[ 0.490000] Serial: 8250/16550 driver, 1 ports, IRQ sharing disabled
<6>[ 0.510000] serial8250.0: ttyS0 at MMIO 0x18020000 (irq = 11) is a 16550A
<6>[ 0.520000] console [ttyS0] enabled, bootconsole disabled
<0>[ 0.530000] guessed flashsize = 8M
<0>[ 0.540000] scanning for root partition
<0>[ 0.540000] uboot detected
<0>[ 0.540000] guessed bootloader size = 50000
<0>[ 0.550000]
<0>[ 0.550000] found squashfs at 161000
<5>[ 0.560000] Creating 8 MTD partitions on "ar7240-nor0":
<5>[ 0.560000] 0x000000000000-0x000000050000 : "RedBoot"
<5>[ 0.570000] 0x000000050000-0x0000007e0000 : "linux"
<5>[ 0.580000] 0x000000161000-0x000000780000 : "rootfs"
<4>[ 0.580000] mtd: partition "rootfs" must either start or end on erase block boundary or be smaller than an erase block -- forcing read-only
<5>[ 0.600000] mtd: partition "rootfs" set to be root filesystem
<5>[ 0.600000] 0x000000780000-0x0000007e0000 : "ddwrt"
<5>[ 0.610000] 0x0000007e0000-0x0000007f0000 : "nvram"
<5>[ 0.610000] 0x0000007f0000-0x000000800000 : "board_config"
<5>[ 0.620000] 0x000000000000-0x000000800000 : "fullflash"
<5>[ 0.630000] 0x000000000000-0x000000050000 : "fullboot"
<6>[ 0.640000] tun: Universal TUN/TAP device driver, 1.6
<6>[ 0.640000] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
<6>[ 1.050000] PPP generic driver version 2.4.2
<6>[ 1.050000] PPP BSD Compression module registered
<6>[ 1.060000] PPP Deflate Compression module registered
<6>[ 1.060000] PPP MPPE Compression module registered
<6>[ 1.070000] NET: Registered protocol family 24
<6>[ 1.070000] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
<6>[ 1.080000] Initializing USB Mass Storage driver...
<6>[ 1.090000] usbcore: registered new interface driver usb-storage
<6>[ 1.090000] USB Mass Storage support registered.
<6>[ 1.100000] Software Watchdog Timer: 0.07 initialized. soft_noboot=0 soft_margin=60 sec soft_panic=0 (nowayout= 0)
<7>[ 1.110000] Registered led device: generic_0
<7>[ 1.110000] Registered led device: generic_1
<7>[ 1.110000] Registered led device: generic_2
<7>[ 1.110000] Registered led device: generic_3
<7>[ 1.110000] Registered led device: generic_4
<7>[ 1.110000] Registered led device: generic_5
<7>[ 1.110000] Registered led device: generic_6
<7>[ 1.110000] Registered led device: generic_7
<7>[ 1.110000] Registered led device: generic_8
<7>[ 1.110000] Registered led device: generic_9
<7>[ 1.110000] Registered led device: generic_10
<7>[ 1.110000] Registered led device: generic_11
<7>[ 1.110000] Registered led device: generic_12
<7>[ 1.110000] Registered led device: generic_13
<7>[ 1.110000] Registered led device: generic_14
<7>[ 1.110000] Registered led device: generic_15
<7>[ 1.110000] Registered led device: generic_16
<7>[ 1.110000] Registered led device: generic_17
<7>[ 1.110000] Registered led device: generic_18
<7>[ 1.110000] Registered led device: generic_19
<7>[ 1.110000] Registered led device: generic_20
<7>[ 1.110000] Registered led device: generic_21
<7>[ 1.110000] Registered led device: generic_22
<7>[ 1.110000] Registered led device: generic_23
<7>[ 1.120000] Registered led device: generic_24
<7>[ 1.120000] Registered led device: generic_25
<7>[ 1.120000] Registered led device: generic_26
<7>[ 1.120000] Registered led device: generic_27
<7>[ 1.120000] Registered led device: generic_28
<7>[ 1.120000] Registered led device: generic_29
<7>[ 1.120000] Registered led device: generic_30
<7>[ 1.120000] Registered led device: generic_31
<7>[ 1.120000] Registered led device: wireless_generic_0
<7>[ 1.120000] Registered led device: wireless_generic_1
<7>[ 1.120000] Registered led device: wireless_generic_2
<7>[ 1.120000] Registered led device: wireless_generic_3
<7>[ 1.120000] Registered led device: wireless_generic_4
<7>[ 1.120000] Registered led device: wireless_generic_5
<7>[ 1.120000] Registered led device: wireless_generic_6
<7>[ 1.120000] Registered led device: wireless_generic_7
<7>[ 1.120000] Registered led device: wireless_generic_8
<7>[ 1.120000] Registered led device: wireless_generic_9
<7>[ 1.120000] Registered led device: wireless_generic_10
<7>[ 1.120000] Registered led device: wireless_generic_11
<7>[ 1.120000] Registered led device: wireless_generic_12
<7>[ 1.120000] Registered led device: wireless_generic_13
<7>[ 1.120000] Registered led device: wireless_generic_14
<7>[ 1.120000] Registered led device: wireless_generic_15
<6>[ 1.120000] u32 classifier
<6>[ 1.130000] input device check on
<6>[ 1.130000] Actions configured
<6>[ 1.130000] Netfilter messages via NETLINK v0.30.
<6>[ 1.140000] nf_conntrack version 0.5.0 (452 buckets, 1808 max)
<4>[ 1.140000] nf_conntrack_rtsp v0.6.21 loading
<4>[ 1.150000] nf_nat_rtsp v0.6.21 loading
<6>[ 1.150000] ip_tables: (C) 2000-2006 Netfilter Core Team
<6>[ 1.160000] IPP2P v0.8.2 loading
<6>[ 1.160000] TCP westwood registered
<6>[ 1.170000] TCP hybla registered
<6>[ 1.170000] TCP vegas registered
<6>[ 1.170000] NET: Registered protocol family 17
<5>[ 1.180000] Bridge firewalling registered
<6>[ 1.180000] 8021q: 802.1Q VLAN Support v1.8
<6>[ 1.190000] searching for nvram
<6>[ 1.190000] nvram size = 0
<0>[ 1.220000] Broken NVRAM found, recovering it (Magic FFFFFFFF)
<6>[ 1.230000] VFS: Mounted root (squashfs filesystem) readonly on device 31:2.
<6>[ 1.240000] Freeing unused kernel memory: 168k freed
<6>[ 4.590000] ag71xx_mdio: probed
<6>[ 4.590000] eth0: Atheros AG71xx at 0xb9000000, irq 4
<6>[ 5.510000] ag71xx ag71xx.0: eth0: connected to PHY at ag71xx-mdio.1:04 [uid=004dd041, driver=Generic PHY]
<6>[ 5.520000] eth1: Atheros AG71xx at 0xba000000, irq 5
<6>[ 6.110000] eth1: Found an AR7240/AR9330 built-in switch
<6>[ 10.010000] Compat-wireless backport release: compat-wireless-2012-04-13-1-r31296
<6>[ 10.010000] Backport based on wireless-testing.git master-2012-04-13
<6>[ 10.330000] cfg80211: Calling CRDA to update world regulatory domain
<6>[ 10.510000] cfg80211: World regulatory domain updated:
<6>[ 10.520000] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
<6>[ 10.530000] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
<6>[ 10.530000] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
<6>[ 10.540000] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
<6>[ 10.550000] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
<6>[ 10.560000] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
<7>[ 10.950000] PCI: Setting latency timer of device 0000:00:00.0 to 64
<7>[ 10.960000] ath: EEPROM regdomain: 0x0
<7>[ 10.960000] ath: EEPROM indicates default country code should be used
<7>[ 10.960000] ath: doing EEPROM country->regdmn map search
<7>[ 10.960000] ath: country maps to regdmn code: 0x3a
<7>[ 10.960000] ath: Country alpha2 being used: US
<7>[ 10.960000] ath: Regpair used: 0x3a
<7>[ 10.970000] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
<7>[ 10.970000] Registered led device: ath9k-phy0
<6>[ 10.970000] ieee80211 phy0: Atheros AR9280 Rev:2 mem=0xb0000000, irq=72
<6>[ 10.980000] cfg80211: Calling CRDA for country: US
<6>[ 11.010000] cfg80211: Regulatory domain changed to country: US
<6>[ 11.020000] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
<6>[ 11.030000] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
<6>[ 11.030000] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
<6>[ 11.040000] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
<6>[ 11.050000] cfg80211: (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
<6>[ 11.060000] cfg80211: (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
<6>[ 11.060000] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
<6>[ 11.250000] eth1: link up (1000Mbps/Full duplex)
<6>[ 11.970000] eth0: link up (100Mbps/Full duplex)
<6>[ 14.200000] eth0: link down
<6>[ 14.260000] device eth0 entered promiscuous mode
<6>[ 14.350000] cfg80211: Calling CRDA to update world regulatory domain
<6>[ 14.380000] cfg80211: World regulatory domain updated:
<6>[ 14.380000] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
<6>[ 14.390000] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
<6>[ 14.400000] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
<6>[ 14.410000] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
<6>[ 14.420000] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
<6>[ 14.420000] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
<6>[ 14.430000] cfg80211: Calling CRDA for country: US
<6>[ 14.450000] cfg80211: Regulatory domain changed to country: US
<6>[ 14.460000] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
<6>[ 14.470000] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
<6>[ 14.480000] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
<6>[ 14.480000] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
<6>[ 14.490000] cfg80211: (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
<6>[ 14.500000] cfg80211: (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
<6>[ 14.510000] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
<6>[ 14.660000] eth0: link up (100Mbps/Full duplex)
<6>[ 14.660000] br0: port 1(eth0) entering forwarding state
<6>[ 14.670000] br0: port 1(eth0) entering forwarding state
<6>[ 22.070000] device ath0 entered promiscuous mode
<6>[ 22.070000] br0: port 2(ath0) entering forwarding state
<6>[ 22.080000] br0: port 2(ath0) entering forwarding state
<6>[ 29.680000] br0: port 1(eth0) entering forwarding state
<6>[ 37.120000] br0: port 2(ath0) entering forwarding state
<6>[ 91.610000] br0: port 2(ath0) entering forwarding state
<6>[ 91.610000] br0: port 1(eth0) entering forwarding state
<6>[ 91.700000] device eth0 left promiscuous mode
<6>[ 91.710000] br0: port 1(eth0) entering disabled state
<6>[ 91.720000] device ath0 left promiscuous mode
<6>[ 91.730000] br0: port 2(ath0) entering disabled state
<6>[ 94.730000] eth0: link down
<6>[ 94.790000] device eth0 entered promiscuous mode
<6>[ 95.110000] eth0: link up (100Mbps/Full duplex)
<6>[ 95.110000] br0: port 1(eth0) entering forwarding state
<6>[ 95.120000] br0: port 1(eth0) entering forwarding state
<6>[ 97.290000] cfg80211: Calling CRDA to update world regulatory domain
<6>[ 97.330000] cfg80211: World regulatory domain updated:
<6>[ 97.340000] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
<6>[ 97.340000] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
<6>[ 97.350000] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
<6>[ 97.360000] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
<6>[ 97.370000] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
<6>[ 97.380000] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
<6>[ 97.380000] cfg80211: Calling CRDA for country: US
<6>[ 97.400000] cfg80211: Regulatory domain changed to country: US
<6>[ 97.410000] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
<6>[ 97.420000] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
<6>[ 97.430000] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
<6>[ 97.430000] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
<6>[ 97.440000] cfg80211: (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
<6>[ 97.450000] cfg80211: (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
<6>[ 97.460000] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
<6>[ 104.540000] device ath0 entered promiscuous mode
<6>[ 104.540000] br0: port 2(ath0) entering forwarding state
<6>[ 104.550000] br0: port 2(ath0) entering forwarding state
<6>[ 110.160000] br0: port 1(eth0) entering forwarding state
<6>[ 119.600000] br0: port 2(ath0) entering forwarding state
Back to top View user's profile Send private message
LOM
DD-WRT Guru


Joined: 28 Dec 2008
Posts: 7647
PostPosted: Thu May 24, 2012 14:47    Post subject: Reply with quote
The FCC documentation for SWX-M2B clearly shows that this is a Bullet M2 HP so try that build instead.

The SWX-M2 is btw a Rocket M2, looks like Ubiquiti is building their Picostation M2 from 2 different products.
_________________
Kernel panic: Aiee, killing interrupt handler!
Back to top View user's profile Send private message
enrico1301
DD-WRT Novice


Joined: 16 Jun 2006
Posts: 44
PostPosted: Thu May 24, 2012 16:55    Post subject: Reply with quote
try bullet M2 version.
update firmware via web is finished but pico is unreachable
Back to top View user's profile Send private message
roln
DD-WRT Novice


Joined: 30 Apr 2012
Posts: 34
PostPosted: Fri May 25, 2012 0:43    Post subject: Reply with quote
I have these two radios with above FCC ID's and they work well with 18024 flash.

I'm seeing same issue you are with latest flashes.. enabling of WAN makes radio not respond.

Hope this helps.
Back to top View user's profile Send private message
Fractal
DD-WRT Guru


Joined: 19 Apr 2010
Posts: 1243
PostPosted: Sat Jul 07, 2012 0:05    Post subject: Reply with quote
roln wrote:
I have these two radios with above FCC ID's and they work well with 18024 flash.

I'm seeing same issue you are with latest flashes.. enabling of WAN makes radio not respond.

Hope this helps.


I have had similar problems with bullet2 they have new hardware in them and 19342 is the only build that supports the wifi on it... however when enabling the wan port it semi bricks the device... What happens is the wifi works but cannot connect to the net or to the webui on 192.168.1.1... Only a hard reset restores it to accessible condition

-Fractal
Back to top View user's profile Send private message
yonro
DD-WRT Novice


Joined: 19 Jul 2012
Posts: 2
PostPosted: Fri Jul 20, 2012 20:55    Post subject: Re: PicoStation M2 HP "B Version" Reply with quote
solo quiero saber donde se pone la parte bridge
enrico1301 wrote:
Hi,
hola
i have two picostation
FCC ID: SWX-M2
FCC ID :SWX-M2B

on M2 version ddwrt runs well but on M2B i can't use wan interface, ex. configure as dhcp client.
i have used latest beta.

also
can't install the 14896 rev. on M2B, on M2 rus properly.

Enrico
Back to top View user's profile Send private message
GP27
DD-WRT Novice


Joined: 21 Jul 2012
Posts: 10
PostPosted: Tue Jul 24, 2012 18:08    Post subject: Reply with quote
Has this problem been fixed?
How do we get those build versions that do work if this isnt fixed. On download page I only see the latest builds.
Back to top View user's profile Send private message
pivot boy
DD-WRT Novice


Joined: 12 May 2014
Posts: 9
PostPosted: Fri Jul 04, 2014 3:01    Post subject: Reply with quote
Really wierd the initial page doesnt show the latest build, you have to click on {Other Downloads} just above there or below where it says additional information, and that takes you to a different page where you can find the latest and other builds.
Back to top View user's profile Send private message
Display posts from previous:    Page 1 of 1
Post new topic   Reply to topic    DD-WRT Forum Index -> Ubiquiti Devices All times are GMT

Navigation

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You cannot download files in this forum