Posted: Sun Jul 06, 2014 13:02 Post subject: DIR615 and multiple wirless repeaters
I have a linksys WAG320N router running factory firmware with a dlink DIR615 acting as a repeater bridge. I'm trying to add a second repeater bridge again off the linksys but for some reason it only works when I plug a lan cable into it.
So with DLINK2 only connected via power when trying to connect to it via phone with it gets stuck on obtaining ip address however if I plug a LAN cable from the linksys into DLINK then everything works.
I've copied the config from DLINK1 to DLINK2 and changed the lan ip and virtual interface name so not sure why it's not working.
Joined: 04 Nov 2012 Posts: 525 Location: Acapulco, Mexico
Posted: Sun Jul 06, 2014 15:57 Post subject: Re: DIR615 and multiple wirless repeaters
lurch wrote:
II've copied the config from DLINK1 to DLINK2 and changed the lan ip and virtual interface name so not sure why it's not working.
If you copied you copied the ip too, change last number of ip to the new router, sounds as a ip conflict. _________________ TP-Link: TL-WR741ND V4
TP-Link: TL-WR842ND V2