pptpd Interface IP Adresse

Post new topic   Reply to topic    DD-WRT Forum Index -> Allgemeine Fragen
Author Message
erdenkind
DD-WRT Novice


Joined: 17 Jul 2014
Posts: 2

PostPosted: Thu Jul 17, 2014 10:33    Post subject: pptpd Interface IP Adresse Reply with quote
Hallo,

ich habe den pptpd sauber installiert und alles aus dem openWRT-Wiki dazu beachtet.

Zum Problem: sobald meine Clients eine Verbindung aufbauen, hat das virtuelle ppp interface eine andere IP als aus dem eigentlichen Subnetz heraus: 10.0.0.200 wäre die richtig IP für den pptpd. Aber das ppp1 interface auf dem openWRT (nachdem sich ein Client verbunden hat) sieht so aus:

ppp1 Link encap:Point-to-Point Protocol
inet addr:192.168.0.1 P-t-P:10.0.0.201 Mask:255.255.255.255
UP POINTOPOINT RUNNING NOARP MULTICAST MTU:1400 Metric:1
RX packets:57 errors:0 dropped:0 overruns:0 frame:0
TX packets:52 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:3
RX bytes:3258 (3.1 KiB) TX bytes:2846 (2.7 KiB)

Das Verhalten des Client, der das Default Gateway des Remote Netzwerkes benutzen soll (also alles über den pptp Tunnel) ist folgendermaßen: der openWRT lässt sich erreichen (ping 10.0.0.1). Aber alle anderen Geräte nicht: hier kommt bei einem Ping die Meldung:

Ping wird ausgeführt für 10.0.0.200 mit 32 Bytes Daten:
Antwort von 192.168.0.1: Zielport nicht erreichbar...

Wo kann ich denn die IP des virtuellen PPP Interfaces beeinflussen?


Gruß

Björn
Sponsor
Display posts from previous:    Page 1 of 1
Post new topic   Reply to topic    DD-WRT Forum Index -> Allgemeine Fragen All times are GMT

Navigation

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You can attach files in this forum
You can download files in this forum